National Technical University of Athens (NTUA)
Development of an integrated system for preliminary design of aircraft gas turbines
Abstract
dc:descriptionThe development of new gas turbine engines formally begins with the engine performance, geometry, and weight requirements, imposed by a customer or the manufacturer itself trying to fulfill a new market need. The first step after defining the project’s specific needs is the preliminary design phase where the potential of a new engine design in terms of fuel efficiency, stable operation, production, operational, and maintenance costs, is assessed. In aircraft engines, the design should also comply with the aircraft’s top-level requirements and with environmental regulations. To fulfill this objective, a preliminary design framework is required which integrates robust, fast, and reliable predictive models and tools for different design and analysis disciplines. This thesis is concerned with the development of an integrated system for the preliminary, multi-disciplinary design and assessment of gas turbine aircraft engines. Therefore, in the scope of the present thesis, a number of computational tools, appropriate for such calculations, were developed under the same, user-friendly coding, modelling, and simulation environment (PROOSIS). The term “appropriate” means tools of lower-fidelity (0D/1D) which exhibit a number of advantages compared to higher-fidelity (2D/3D) tools when used in the context of preliminary design studies: 1) they are time efficient, 2) require very few and very basic performance and geometry inputs which are typically available during a preliminary calculation, 3) they are relatively easy in setting-up a calculation model and, finally, 4) they are easy to integrate in a design workflow. Although there is not a single general recipe, the preliminary design phase should, at least, comprise modules for the aerothermodynamic design of turbomachinery components, for performance calculations at off-design conditions, for the mechanical design and analysis of critical structural components and parts, and for weight estimations. Therefore, in the context of the present thesis, corresponding computational tools and models (0D/1D) were developed which are organized in the following four (4) libraries: 1) TURBO1D: Includes models for the preliminary aerothermodynamic design of gas turbine components, which are appropriate for multi-point design studies. 2) GTMDC: Includes models and tools for the preliminary design and analysis of critical structural parts. 3) GTWC: Includes models for the preliminary weight estimation of gas turbine components and generic turbofan engines. 4) MLC: Includes models and tools for the preliminary aerothermodynamic design (MLDC) and off-design performance estimation (MLAC) of multi-stage, axial-flow compressors. All the above tools were initially validated individually against publicly available data of real-engine configurations or against predictions produced by higher-fidelity (3D) tools. Then, they were combined under the PROOSIS environment for developing an integrated system for the preliminary design of aircraft engines, which allows the efficient preliminary design and assessment of new engine concepts by easily defining any combination of design metrics and constraints, at any operating point, and for any of the involved design and analysis disciplines. The capabilities, fidelity, and efficiency of the developed tools are demonstrated through trade-off optimization studies at component and at engine level, considering an ultra-high bypass ratio turbofan engine for a short-range aircraft mission. The design studies were formulated considering different objectives and conducted for two (2) values of the engine overall pressure ratio split between the low- and high-pressure compressors (0.30 and 0.40), which are of current industrial interest. It is important to note that some of the tools presented in this thesis were developed as part of LTT/NTUA’s collaboration with European gas turbine and aircraft industries, while the novel contributions of the present work are supported by five (5) peer-reviewed international scientific conference and journal papers.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kolias, Ioannis
- Κόλιας, Ιωάννης
Subjects
dc:subject × 24- Αεροπορικοί αεριοστρόβιλοι
- Προκαταρκτικός σχεδιασμός,
- Μοντέλα χαμηλής πιστότητας (0D/1D)
- Θερμοδυναμική ανάλυση επιδόσεων
- Αεροθερμοδυναμικός σχεδιασμός
- Μηχανολογικός σχεδιασμός
- Εκτίμηση βάρους
- Στροβιλοαντιδραστήρες διπλού ρεύματος υπέρ-υψηλού λόγου παράκαμψης
- Βελτιστοποίηση
- Aircraft gas turbines
- Preliminary design
- Lower-fidelity models (0D/1D)
- Performance analysis
- Aerothermodynamic design
- Mechanical design
- Weight estimation
- Ultra-high bypass ratio turbofan engines
- Trade-off optimization studies
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Αεροδιαστημική μηχανική
- Mechanical Engineering
- Engineering and Technology
- Aerospace Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/54081