Agricultural University of Athens
Ανάπτυξη και αξιοποίηση δομών ανθεκτικού αμύλου και λειτουργικές ιδιότητες καινοτόμων αμυλούχων προϊόντων
Abstract
dc:descriptionIn the present Dissertation, physical processes for the production of starch nanostructures and their potential use as emulsion stabilizers as well as the ability to form and enrich starch hydrogel systems are investigated. The main question investigated through this study is the potential use of resistant starch nanoparticles in novel natural food systems. There is an ever-growing interest towards the development of innovative foods that contribute to a healthy diet, with the consumers shifting towards products that are marked as "clean label".In the first part of the Dissertation, the physical process of High-Pressure Homogenization (HPH) to produce resistant starch nanoparticles is presented. Samples were processed at different pressure conditions: 140 MPa, 200 MPa, 250 MPa and for one up to four homogenization cycles. The defining factors affecting size, morphology, amylose percentage and crystallinity were the number of cycles and the homogenization pressure. Of the two parameters, pressure had the most significant effect on size reduction compared to treatment time. Interestingly, reducing particle size did not disrupt the final structure, since the crystallinity of the resistant starch granules remained B-type. Particle size was successfully reduced from about 7.5 μm to 0.5 μm. In conclusion, it became clear that through the high-pressure homogenization process, nanoparticles with a wide range of applications in the food field can be produced.In the second part of the present Dissertation, an innovative physical process (method) for starch size reduction up to nano scale is presented, consisting of three individual steps: gelatinization, nanoprecipitation, and ultrasonic treatment. The successfully applied nanoprecipitation technique contributes to the formation of nanoparticles, where the final step of ultrasound offers the synthesis of uniformly distributed starch nanoparticles (170 nm) free from agglomeration effects. This phenomenon was verified by sequential measurements with Dynamic Light Scattering (DLS), zeta potential and fluorescence. Specifically, the three-step physical process followed reduced the size of the starch particles to the nanoscale without destroying their crystalline structure, asvalidated by X-Ray Diffraction (XRD) and X-ray Diffraction of Small Angle (Small Angle X-ray Scattering, SAXS). Also, the treatment had no effect on their composition, as verified by the Fourier Transform Infrared Spectroscopy (FTIR) as well as through Thermogravimetric Analysis (TGA). Moreover, an increase in hydrophobicity as a function of size reduction was observed in the nanoparticles. Overall, the methodology we applied can be characterized as a tailor-made approach for the selective size reduction of resistant starch particles, allowing their use in a multitude of applications in food models.In the third part of the Dissertation, the application of naturally produced starch nanoparticles through the three-step methodology as stabilizers in Pickering emulsions is presented. Firstly, starch nanoparticles successfully stabilized a Pickering emulsion model even for two months of storage time. Physically produced starch nanoparticles are spherical in shape as observed by Scanning Electron Microscopy (SEM). The increase in particle concentration leads to a decrease in surface and interfacial tension, enhancing the ability of particles to adsorb at the interface, forming a strong layer at the interface, that enhances emulsion stability. Increasing the concentration of starch nanoparticles had a significant effect on the physical properties of the emulsion, in terms of their rheological properties, stability and microstructure, such as droplet size and zeta potential. Particle stabilization is visualized by Confocal Laser Scanning Microscopy (CLSM). Notably, the network formed by the nanoparticles, they simulate a behavior with a hydrogel structure, according to their rheological properties. The stability of all samples improved with increasing nano-particle concentration, showing smaller values in particle size and higher zeta potential values. Through this study, a new method is presented for the creation of Pickering-type emulsions for food, which can potentially be used as fat substitutes.In the fourth and last part of the Dissertation, the effect of normal starch concentration of and resistant starch particles as fillers on the textural properties of starchy hydrogels is presented. Specifically, in normal starch hydrogels with a concentration of 8% w/v, 10% w/v, 12% w/v and 15% w/v, the effect of replacing normal starch with 2% and 10% resistant starch was studied. By increasing normal starch concentration, the maximum values of hardness, cohesiveness and gumminess were observed, while it was shown that the addition of resistant starch particles does not affect the textural properties of the systems, presenting similarities in the rheological profiles and texturalproperties. The water holding capacity (WHC) showed an increase with the increase in the concentration of normal starch, a characteristic attributed to the denser network that they form as illustrated by the SEM micrographs. Additionally, an increase in crystallinity was observed with increasing concentration of normal starch and resistant starch (higher substitution). Substitutions with resistant starch did not affect the physical properties of the hydrogels, indicating their potential role as inactive fillers, conferring the benefits of resistant starch for the maintenance of normal blood glucose levels.
Degree
thesis:*- Grantor dc:publisher
- Agricultural University of Athens
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Apostolidis, Eftychios
- Αποστολίδης, Ευτύχιος
Subjects
dc:subject × 16- Ανθεκτικό άμυλο
- Νανο-σωματίδια
- Γαλακτώματα τύπου Pickering
- Δομή
- Υδρογέλες
- Resistant starch
- Nano-particles
- Pickering emulsions
- Structure
- Hydrogels
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη και Τεχνολογία τροφίμων
- Other Engineering and Technologies
- Engineering and Technology
- Food Science and Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/54358