University of Patras
Βελτιωμένος σχεδιασμός και έλεγχος μετατροπέων συντονισμού για φόρτιση συσσωρευτών
Abstract
dc:descriptionBattery charging is inextricably linked to the development of applications that require electrical energy storage. Especially, in the field of electromobility there are various charging methods, depending on the requirements that are needed to be served. For example, there are off-board chargers for fast-charging but with limited access due to the required infrastructure for this type of charging stations. There are also on-board chargers that allow charging through a conventional supply from the grid but have lower specifications, and finally there are wireless chargers which offer unique advantages but have greater complexity and limitations. In this doctoral thesis, the research is focused on the last two types of chargers, and more specifically on the DC-DC conversion stage which is responsible for charging the batteries according to the appropriate charging profile. The electronic power converters that are being studied, consist of two full-bridges with a resonant circuit in between, and they offer the possibility of significantly reducing the switching losses. However, due to the strong dependence of the electrical parameters of the converter on the changing load at the output and the operating frequency, the design and the control of the circuit are challenging factors. Thus, in this work, a design methodology for the resonant tank parameters is proposed, in order to reduce the stress on the components without oversizing them and to ensure at the same time the efficient operation of the converter throughout the whole charging range. As for the control method, it is implemented using two control variables, the frequency and the phase-shift of the pulses of the inverting bridge. As a result, either the current or the output voltage is regulated, depending on the operating state of the charger, and at the same time the zero-voltage switching (ZVS) at the turn-off of the semiconductors of the inverter is ensured. The rectifying bridge is driven synchronously to reduce the conduction losses, while its switching losses are zero due to the soft-commutation of the current in each leg of the bridge. The effect of the angle at which ZVS is achieved, which is defined by the zero-crossings of voltage and the current at the inverter output, is further investigated. More specifically, through theoretical and experimental results it is concluded that the value of this angle has impact on the form and the RMS value of the currents in the resonant tank, therefore the stress on the circuit components is also affected. Thus, there is a specific value of the angle at which the efficiency of the converter is maximized and it is different depending on the charging state. Based on this, a simple control algorithm is proposed according to which the value for the optimal operation is automatically detected, and it is also adaptable to converters with different design characteristics. In addition, an alternative winding method of the power transformer is proposed to widen the design range and therefore to be able to achieve the desired magnetizing inductance and stray inductance, thus avoiding the use of additional inductors in the resonant tank. Next, follows the study of the wireless charger based on the inductive power transfer, by adopting the simple series-series compensation circuit. The working principle of the circuit is the same as that of the conventional charger, with the main difference that the transformer is replaced by coupled inductors. Therefore, since the converter must be redundant and perform efficiently even to changes of the resonant tank elements, a design methodology is proposed to ensure the operation of the converter in a wide range of the coupling coefficient and for the whole load spectrum, while limiting the stress on the circuit components. In addition, the same control algorithm is applied to find the operating point with the maximum efficiency at any operating state. As a result, the wireless charger has the ability to operate efficiently under different conditions of vertical distance and misalignment between the transmitter and receiver coils. The theoretical analysis, the design and the control methods that are presented in this doctoral thesis are confirmed through simulations and later with the implementation of laboratory prototypes to verify the results.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Mirtchev, Alex
- Μίρτσεβ, Άλεξ
Subjects
dc:subject × 20- Αλγόριθμος ελέγχου
- Ασύρματη φόρτιση
- Βέλτιστη λειτουργία
- Μεθοδολογία σχεδιασμού
- Μέθοδος ελέγχου
- Μετατροπέας συντονισμού
- Φόρτιση συσσωρευτών
- Control algorithm
- Wireless charging
- Optimal operation
- Design methodology
- Control method
- Resonant converter
- Battery charging
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Ηλεκτρική και Ηλεκτρονική μηχανική
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Electrical and Electronic Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/54568