Aristotle University Of Thessaloniki (AUTH)
Ανάπτυξη ενός γεωδαιτικού δέκτη GNSS υψηλής ακρίβειας με τη χρήση ΟΕΜ προϊόντων, τεχνολογίας τρισδιάστατου εκτυπωτή και λογισμικού για smartphones
Abstract
dc:descriptionThe present doctoral dissertation, “Development of a high-precision GNSS geodetic receiver using OEM components, 3D printing technology and smartphone software”, is structured in six chapters and four appendices. The subject and objectives of this thesis, as well as its originality, are briefly outlined in Chapter 1. The primary goal was to create two receivers, one as a permanent reference station and one as a rover. Chapter 2 investigates recent 3D printing processes in depth, with focus on the FFF/FDM technique, which was used to create the enclosures of the receivers developed in the framework of this thesis. Chapter 3 thoroughly covers all stages of the receiver's development as a permanent reference station. The third chapter describes all the different electronic components that comprise the receiver, as well as their connections. Simultaneously, it thoroughly specifies the steps of design and additive manufacturing of the components that comprise the receiver's housing, as well as the processes of assembly of the electronic components within the housing. The receiver management software development is also described. In addition to this chapter, the receiver's anticipated production cost is mentioned, and its technical attributes are compared to those of a commercial, third-party manufacturer receiver. Finally, Chapter 3 explains how to install and use the receiver as a permanent reference station. The organization of Chapter 4 is identical to that of Chapter 3, and it examines the stages of development of the rover receiver. The quality of the raw and derived GNSS data for the two receivers created in this thesis is examined in Chapter 5. Using a zero-baseline configuration, the receiver's raw data as a permanent station is compared with the corresponding commercial GNSS receiver using appropriate software for quality control and calibration. Chapter 5 also includes simple differences error estimates for all receiver supported GNSS systems, as well as matching carrier frequencies for phase measurements. Chapter 5 continues with the quality control stages of the mobile GNSS receiver, which include the quality control of the extracted raw data for a set period, receiver calibration according to the international standard ISO 17123-8, and further investigation of the reliability of the NRTK technique at selected reference sites. The investigation is conducted by comparing the derived NRTK position of the specified reference sites from the rover receiver developed for this dissertation to the matching NRTK positions of two other commercial mobile receivers. In chapter 6, the conclusions drawn from the preparation of this thesis are summarized. Annex A includes all the electromechanical components and consumables used for the development of the receivers. Annex B contains the source code on which the functionality of the receivers is based. Appendix C includes the wiring diagram of the electronic components of the rover receiver motherboard. Finally, appendix D includes the ISO 17123-8 certificate of the rover GNSS receiver.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Karolos, Ion-Anastasios
- Κάρολος, Ίων-Αναστάσιος
Subjects
dc:subject × 26- Γεωδαιτικός δέκτης GNSS
- Τρισδιάστατη εκτύπωση
- Ανάπτυξη hardware
- Ανάπτυξη software
- OEM προϊόντα
- Γεωδαισία
- Προσθετική κατασκευή
- Geodetic GNSS receiver
- 3d printing
- Hardware development
- Software development
- OEM components
- Geodesy
- Additive manufacturing
- Γεωεπιστήμες και Επιστήμες Περιβάλλοντος
- Φυσικές Επιστήμες
- Ηλεκτρονικοί υπολογιστές στις γεωεπιστήμες
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Επιστήμες Μηχανικού και Τεχνολογία
- Όργανα και Συστήματα οργάνων
- Earth and Related Environmental Sciences
- Natural Sciences
- Computers in Earth Sciences
- Other Engineering and Technologies
- Engineering and Technology
- Instruments and Instrumentation
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/54653