Back to search

Technical University of Crete (TUC)

Rational design and development of nanostructured non-precious metal oxide catalysts for energy and environmental applications

Abstract

dc:description

The rational design and development of highly-active and cost-efficient catalysts for energy and environmental applications constitutes the main research pillar in the area of heterogeneous catalysis. In this perspective, the present thesis aims at the development of noble metal-free nanostructured ceria-based transition metal catalysts with innovative composition and architecture (ΜxCe1-xOδ, M: Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn), which are characterized by low cost and optimal activity/stability. More specifically, the surface chemistry of the as-prepared catalysts and their catalytic activity was attempted to be fine-tuned through the advanced synthetic methods, the surface and/or structural promotion and the modification of metal-support interactions using promoting/reducing agents. In the framework of the present thesis, the effect of the preparation method (hydrothermal, precipitation, and the Stöber method) of CeO2/TiO2 mixed oxides on their physicochemical properties and CO oxidation performance was initially investigated. The catalyst prepared using the Stöber method exhibited optimal catalytic activity, which can be attributed to its enhanced reducing capability. Additionally, the effect of different Zn/Ce ratios on their physicochemical properties and CO oxidation performance of CeO2/ZnO mixed oxides was examined. Using the hydrothermal method, a series of bare CeO2 and ZnO oxides, as well as CeO2/ZnO mixed oxides with varying Zn/Ce atomic ratios (0.2, 0.4, 0.6), were prepared. The catalytic results demonstrate the improved performance of the mixed oxides compared to the bare catalysts, revealing synergistic interactions between CeO2 and ZnO.In addition, the effect of the active phase nature on the physicochemical properties and catalytic activity for the CO2 hydrogenation reaction in ceria nanorods-based transition metal catalysts, M/CeO2 (M: Ti, V, Cr, Mn, Fe, Co, Ni, Cu) was explored. It was found that the CO2 conversion follows the order: Ni/CeO2 > Co/CeO2 > Cu/CeO2 > Fe/CeO2 > CeO2 > Cr/CeO2 > Mn/CeO2 > Ti/CeO2 > V/CeO2. Based on the selectivity results, it was observed that bare ceria, Cu/CeO2, Fe/CeO2, Cr/CeO2, Mn/CeO2, Ti/CeO2, and V/CeO2, are selective towards CO production, while Co/CeO2 and Ni/CeO2 catalysts are particularly selective towards methane (CH4). Specifically, the combination of nickel with ceria significantly favors the CO2 methanation reaction. Then, the role of Ni particle size in the CO2 hydrogenation reaction of Ni/CeO2-nanorods catalysts was investigated. Specifically, catalysts were prepared with a Ni/Ce atomic ratio that varied between 0.10 and 1.50 and it was found that the increase of Ni loading had a significantly positive effect onthe catalytic behavior with the best behavior being attributed to the sample with an atomic ratio of Ni/Ce=1.00, corresponding to an optimal Ni particle size ~20 nm. Notably, all samples showed high CO2 methanation activity at temperatures lower than 300 oC and negligible CO production. Furthermore, the phenomenon of promotion using ZnO was investigated by preparing CeO2/ZnO mixed oxides as supporting carriers of Ni active phase. In contrast to the catalytic activity of Ni/CeO2, Ni/ZnO and Ni/CeO2-ZnO catalysts are selective towards CO production, suppressing the CO2 methanation to a large extent, revealing the role of ZnO promoter in determining the reaction mechanism.Aiming to develop a low-cost metal-free material that can be used either as a catalyst or as an active phase support, in the second part of the present thesis, graphitic carbon nitride (g-C3N4) was prepared and evaluated for the photocatalytic degradation of gases and liquids pollutants. Specifically, a comparative study was conducted on the physicochemical properties and adsorption capacity of bulkg-C3N4 and g-C3N4 nanosheets. The results revealed significantly improved physicochemical characteristics for the nanosheets, as well as enhanced adsorption capacity compared to the bulk structure of g-C3N4. Furthermore, both bulk g-C3N4 and g-C3N4 nanosheets were evaluated for their photocatalytic degradation of gaseous and liquid pollutants, and the g-C3N4 nanosheets exhibited exceptional photocatalytic performance. Collectively, the present thesis has unequivocally highlighted the important role of the preparation method and surface modification on the physicochemical properties, metal-support interactions and in turn, on the catalytic performance of as-prepared catalysts. More importantly, the fine-tuning of size, shape and electronic state can notably affect not only the reactivity of metal sites but also the interfacial activity offering a synergistic contribution towards the development of highly active composites. Through the proposed optimization approach extremely active and cost-efficient catalytic materials were obtained for CO oxidation, CO2 hydrogenation and the photocatalytic degradation of gases and liquids pollutants, being among the most active reported so far in open literature.

Degree

thesis:*
Grantor dc:publisher
Technical University of Crete (TUC)
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Stefa, Sofia
  • Στέφα, Σοφία

Subjects

dc:subject × 14

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/54663

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Stefa, Sofia; Στέφα, Σοφία. Rational design and development of nanostructured non-precious metal oxide catalysts for energy and environmental applications. Technical University of Crete (TUC), 2023. http://hdl.handle.net/10442/hedi/54663