University of Patras
Βελτιστοποίηση της ανάπτυξης ανθρακούχων ροφητικών υλικών μετά από πυρόλυση βιομάζας με τη μελέτη των επιδράσεων της πρώτης ύλης, της αναλογίας όγκου αέρα, του χρόνου πυρόλυσης, και της ενεργοποίησης με την ταυτόχρονη αξιολόγηση των φυσικοχημικών και των ροφητικών χρακτηριστικών των παραγόμενων υλικών
Abstract
dc:descriptionBiochar is a carbonaceous material obtained from biomass heated under different pyrolytic conditions. Pyrolysis is a thermal process through which organic substances decompose under a limited or very low oxygen atmosphere condition at a temperature range of 300 to 1300oC. Biochar can be incorporated into soil as soil amendment due to its high sorptive capacity for nutrients and water, while providing the organic matter amounts which prevent the physical breakdown of soil. While several extensive papers have emphasized on the production of biochar from various types of biomasses, limited literature reviews are available on biochar production from biomass by-products such as espresso coffee grounds (SCG), Greek coffee sediment (SGC), grape seeds after wine production (GSW), grape seeds after tsipouro production (GST) and rice husk (RH). The physicochemical characteristics of obtained biochars were investigated through analytical techniques such as X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA), Scanning Electron Microscopy (SEM), Porosimetry with the gas (N2) adsorption−desorption in a Micromeritics TriStar 3000 Analyser system by the Brunauer, Emmett, and Teller (BET) equation, Fourier Transform Infrared Spectroscopy (FTIR). The t-plot shows that the pyrolysis of raw SGC leads to the highest specific surface area (870 m2 g-1) and 67.5% of its area corresponds to micropores. On the other hand, the lowest specific surface area (367 m2 g-1) and the highest pore size 4.3 nm were observed for biochar produced from raw rice husk. The pH of feedstock grape seeds for tsipouro production was neutral and the pH of the resulted biochar had the highest alkalinity (pH 10.4) among the alkaline obtained pyrolysis samples. The other raw materials were slightly acidic (pH 5.5 to 6.4). and the produced biochars were alkaline in nature with pH values ranging from 9.4 to 10.7. The alkaline nature of biochars could be attributed to the presence of alkaline oxides in their mass. The spectra of the raw materials show several peaks indicating that the surface chemistry of the examined sample contains different functional groups. High temperature pyrolysis results to the disappearance of several peaks and the weakening of the rest. The XRD patterns of biochars with the characteristics two peaks at around 25° and 43° indicates that the obtained biochar is a typical amorphous carbonaceous material with porous structure and high crystallinity due to the disintegration of lignin, cellulose, and hemicellulose. The thermogravimetric analysis of the carbonaceous materials shows that the increases of temperature biochar obtained by rice husks present the lowest mass loss among the tested samples (main mass loss at temperature <150oC). The rest of biochars lost mass follows two distinct temperature ranges, at low and elevated temperatures. The first phase occurred at around 150 and 200oC, attributed to the adsorbed water and moisture content removal during the dehydration of the samples. The second phase was observed at around 850oC where the loss of mass happened progressively and continuously to 1000oC, resulting to a possible further pyrolysis treatment. In summary, biochars obtained by pyrolysis at 850oC of the agro-waste raw materials examined are highly porous exhibiting mainly micropores. Their porous texture is combined with high specific surface area following the order: biochar produced from sediment of Greek coffee>spent coffee grounds>grape seeds for wine production> grape seeds for tsipouro production >rice husk. Although the untreated agro-wastes are either slightly acidic or neutral in nature, their produced biochars are alkaline. FTIR spectra showed that pyrolysis leads to the removal of several functional groups. All biochars obtained exhibit low crystallinity and are quite stable for temperatures lower than the pyrolysis one. The second part of the present study aims to provide comprehensive and innovative data about the vital role of pyrolysis time (spent coffee grounds, rice husks) on the physicochemical properties of biochars produced. The dried raw materials were transferred in a custom-made ceramic saggar box and pyrolyzed at 850oC for 1, 2, 4, 6 h in an electric furnace. Biochar produced from spent coffee grounds with specific surface area 400 m2 g-1 was obtained after 1 h pyrolysis time at 850oC while a biochar with specific surface area 1043 m2 g-1 obtained at 6 h. This significant increase of specific surface area was reflected in 2.5 times increase of micropore specific surface area as well as to 3.7 times increase of external specific surface area. However, the ratio of micropore specific surface area to external one decreased with pyrolysis time from 4 times after 1h to 2.7 after 6 h of pyrolysis. The specific pore volume values of biochars also increased with the pyrolysis time (0.20 cm3 g-1 after 1 h to 0.53 cm3 g-1 after 6h). For the pore size values of biochars, limited difference was observed (3.0-3.5 nm). Biochars XR-diffractograms revealed that at sort pyrolysis time (up to 2 h) are obtained almost amorphous carbonaceous materials (wide diffraction peaks at 2θ: 25 & 43o). Then, as the pyrolysis time increases from 2 to 6 h, graphitic carbon is formed and MgO (cubic) peaks are also observed followed by weakening of the peak at 2θ: 25o. FTIR spectra of biochar samples produced did not show significant changes with pyrolysis time. As it was expected the biochar yield decreases with the pyrolysis time at elevated temperature (19% at 1h, 18% at 2h, 13% at 3h and 10% at 6 h). Regarding the effect of the thermal modification on physicochemical properties of biochars obtained from raw rice husks at the same pyrolysis times, (1, 2, 4, 6 h) it can be characterized milder compared to the biochars produced from spent coffee grounds at the same pyrolysis temperature. The specific surface area of the tested biochars were 280, 354, 393, and 386 m2 g-1 for biochar from rice husk after 1, 2, 4, and 6 h, respectively. The t-plot disclose that the biochar pore volume increased from 0.15 to 0.28 cm3 g-1 as the pyrolysis time also increased from 1 to 6 h. Biochar produced from rice husk is alkaline in nature and as the pyrolysis time extended from 1 to 6 h the pH value was reduced, possibly due to the increase of ash content. Biochar yield was reduced as the pyrolysis time increased. The highest biochar yield was 36% (rice husk biochar produced after 1 h of pyrolysis) and the lowest was observed for rice husk biochar produced after 6 h of pyrolysis (26%). After 1 h of pyrolysis, the biochar yield is linearly decreased by 2% per h of extra pyrolysis. The third part of the study aims to optimize the physicochemical characteristics of produced biochar’s by spent coffee grounds and raw rice husk through chemical activation with acidic and alkaline aqueous solutions. More specifically, biochar’s were treated with aquatic solutions 2 M of H2SO4, H3PO4, NaOH, and 1 D-H2O at a temperature of 80 oC for 4h and washed with hot distilled water until the pH of the solution became neutral. The t-plot for the biochar of spent coffee grounds discloses that the activation with H3PO4 leads to high specific surface (921 m2 g-1) and micropore (626 m2 g-1) area compared to other biochars. Simultaneously, the activation of spent coffee grounds biochar increases the pore size, and the highest pore size was observed for the alkaline activated biochar (3.7 nm) compared to activated with H2SO4 and H3PO4 (3.4 nm). The raw spent coffee grounds have a slightly acidic nature (pH 5.5) than the produced carbonaceous material (pH 10.6) which has the highest alkaline nature. For the activated biochars, the activated with H2SO4 (pH 4.6) is more acidic than the activated with H3PO4 (pH 5.2). Furthermore, washed with distilled water biochar (pH 9.1) is more alkaline than SCG-A. Moreover, the five samples present a peak at 1050 cm-1 that corresponds to (C-O) bond and a weak peak at 3450 cm-1 that reveals O-H groups. For the raw spent coffee grounds, a carboxyl stretching mode (C=O) demonstrates a weak peak at 1740 cm-1; the sharp peaks at 2830 and 2950 cm-1 are related to aliphatic C-H2 bending. It is very important to mention that the peaks of washed with distilled and alkaline activated biochars are similar. The results indicates that biochars produced at 850oC from spent coffee grounds are acidic in nature, they are highly porous materials with micropores corresponding to most of the pore volume and the activated with H3PO4 shows a rapid increase of micropore area compared to other activated and washed biochars. On the other the t-plot for the rice husk biochars discloses that the activation with NaOH leads to high specific surface (938 m2 g-1) and micropore area (588 m2 g-1) compared to other samples (367-386 m2 g-1). Simultaneously, the activation of rice husk biochars increases the pore size of biochar and the highest pore size was observed for the alkaline activated (5.1 nm) compared to activated with H2SO4 and H3PO4 (4.8 nm). This can be attributed to the silica removal from raw rice husk by alkaline solution which is attained to create a mesoporous material that is more suitable as a catalyst support for balky reactants. Raw rice husk presents various peaks on its surface corresponding to different functional groups. During the high pyrolysis temperature (850oC) most of these peaks either disappear or begin to diminish and only a few new peaks appear. Furthermore, raw rice husk has more acidic behavior than the other samples (pH 6.0). For the activated biochars, the activated with H3PO4 (pH 6.2) is slightly more acidic than the with H2SO4 (pH 6.1) and the activated with NaOH (pH 8.5) is also slightly alkaline than washed with distilled water biochar (pH 8.4). To conclude, activation with alkali solution creates a more desirable sorbent material since it increases surface area by 156% compared to activation with acidic solution which increases surface area by 3-4%. In summary, we can point out that the activation of biochars obtained from spent coffee grounds and raw rice husk with acidic and alkaline aqueous solutions acted catalytically for biochars, increased the specific surface area of alkaline activated biochar by 3 times compared to the beginning one due to the presence of SiO2 on the surface of the material and the formation of silicates. The fourth part of the present work was concerned with the study of sorption capacity of raw materials, biochars produced at 850oC, modified with the pyrolysis time, and chemically activated carbonaceous materials in batch experiments. Raw materials and obtained biochars were employed to remove methylene blue in 40 mL glass vials. A stock solution (20 mg L-1) of methylene blue was prepared. About 3 mg of each sorbent (raw materials and obtained biochars) placed into the glass vials. For all samples measurements of the aqueous concentration were taken after 24 h and 7 days. Sorption capacity varied from sample to sample and ranged from 29 to 54 and from 58 to 370 mg g-1 for feedstocks and biochars, respectively. Methylene blue removal efficiency was more affected by specific surface area than by pore size. Therefore, biochars produced from Greek coffee sediment (851 m2 g-1) and espresso coffee grounds (750 m2 g-1) exhibit the maximum surface area showing the highest adsorption capacity of 370 and 280 mg g-1, respectively. For the biochar modifying with the pyrolysis time produced by spent coffee grounds and raw rice husks after 1, 2, 4, 6 h of pyrolysis at 850oC the experimental conditions were similar to the aforementioned one. The results revealed that the sorption efficiency of biochar produced from espresso coffee grounds increases with pyrolysis time. More precisely, the sorption was 5, 15, 48 and 76 mg g-1 after 24 h and 7, 19, 80 and 130 mg g-1 after 3 days for biochars obtained after 1, 2, 4 and 6 h pyrolysis time, respectively. It appears that the adsorption efficiency of the studied biochars is determined by its specific surface area. For the produced, from the raw rice husks, biochars at 24 h, the sorption was 6, 22, 32 and 38 mg g-1, while at 8 days it increased to 16, 58, 125 and 127 mg g-1 for biochars obtained after 1, 2, 4 and 6 h pyrolysis time, respectively. Sorption experiments revealed the vital role of pyrolysis time in dye sorption. The carbonaceous materials showed different removal capacities which increased significantly as the pyrolysis time also increased from 1 to 4 h. Activated biochars using both acidic (H2SO4, H3PO4) and alkaline (NaOH) solutions were tested for its sorption capacity using methylene blue dye and the hydrophobic phenanthrene. The results of the sorption show that for methylene blue with an initial concentration of 30 mg L-1, the alkali activated biochar obtained from spent coffee grounds and raw rice husk present the largest sorption among the tested samples (236 and 135 mg L-1, respectively) which strongly confirming the interrelated relation of specific surface area with the dye removal. For phenanthrene with an initial concentration of 400 μg L-1 the largest sorption was observed in the samples with the highest specific surface area, pore volume and pore diameter with the highest sorption occurring the alkali activated biochar produced by raw rice husk (~20 mg g-1). In the last part of the study on the effect of the sorption capacity of methylene blue and tartrazine dyes by biochar produced pyrolysis from raw rice husks with pyrolysis at 850oC for 2h in continuously flow experiments. A peristaltic pump pumped the solution of methylene blue and tartarzine with an initial concentration of 20 and 21 mg L-1, into a glass column of 182 mL volume. The sorption capacity of the sorbent is different for each dye, which results not only to the intensity but also to the electrostatic interactions developed between the sorbent and the dye. Thus, for methylene blue the qe is approximately 2.5 times higher than the corresponding qe of tartrazine (370 vs. 150 mg g-1). This result seems to be related to the electrostatic attraction of methylene blue cations and to the electrostatic repulsion of the tartrazine anions with the alkaline charged surface of the examined biochar.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Mourgkogiannis, Nikolaos
- Μουργκογιάννης, Νικόλαος
Subjects
dc:subject × 16Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/54750