National and Kapodistrian University of Athens
Φωτονικές νανοδομές διοξειδίου τιτανίου για φωτοκαταλυτικές εφαρμογές στο ορατό
Abstract
dc:descriptionThe subject of this thesis was the surface modification of TiO2 photonic crystals with nanoscopic cobalt (CoOx) and iron (FeOx) oxides aiming at the development of visible-active titania photonic photocatalysts that promote visible light harvesting via "slow photons" and photoinduced electron-hole separation. The technique of convective evaporation-induced co-assembly of colloidal spheres of different diameters with a suitable titania precursor was applied to fabricate TiO2 photonic crystals of variable photonic gap in the form of inverse opals in combination with their surface modification by the chemisorption-calcination-cycle method of metal acetylacetonate complexes on titania, in order to achieve the optimal overlap of the slow light spectral regime with the material’s weak electronic absorption. The composite photonic materials were systematically studied by different experimental methods (specular/diffuse reflectance optical spectroscopy, scanning-transmission electron microscopy and elemental imaging, Raman, infrared, X-ray photoelectron and photoluminescence spectroscopies, photoelectrochemical measurements, N2 porosimetry) for successive cycles of surface modification with nanoscale CoOx and FeOx complexes to investigate their effect on the optical and electronic properties of TiO2 photonic crystals, in combination with the comparative evaluation of their photocatalytic performance in the degradation of organic pollutants in water under visible and UV- vis light. In this way, the structure-performance relationships of the photonic films were determined and an optimization of their composition was achieved for photocatalytic applications. In addition, two types of composite photonic materials beyond monolithic inverse opal films were fabricated and studied with the aim of improved trapping of visible light for photocatalytic processes. In particular, bilayer CoOx-TiO2 photonic films were studied where it was found that the photonic crystals can act effectively both as active photocatalytic layers and as Bragg mirrors in multilayered photocatalytic films. The introduction of a planar structural “defect” was also studied through the incorporation of a mesoporous nanocrystalline titania layer within the monolithic reverse opals, which disrupts the periodicity of the photonic structure by creating localized states within the photonic gap, and which led to a significant improvement in the photocatalytic performance. This thesis consists of 5 chapters: Chapter 1 presents concisely the properties of titanium dioxide, the mechanism and limitations as well as the photocatalytic activity enhancement of nanocrystalline TiO2 by heterojunctions with transition metal oxides of smaller energy gap. Then, there is a brief introduction to photonic crystals, the ways of constructing three-dimensional photonic structures as well as the enhancement of semiconductor photocatalytic processes by means of slow photons and Bragg reflection. Chapter 2 presents the fabrication method of TiO2 inverse opal photonic crystals with controlled morphological characteristics and photonic gaps through the self-organization of monodisperse polymeric spheres from colloidal suspensions in the presence of a titania alkoxide precursor and their surface modification by applying the chemisorption-calcination-cycle method of acetylacetonate complexes for the corresponding transition metal. Subsequently, the experimental methods and setups used for the study of photonic materials are presented as well as the experimental setup and procedure for the photocatalytic experiments. In Chapter 3, the surface modification of TiO2 photonic crystals with nanoscopic CoΟx oxides is studied by applying the cyclic method of chemisorption-calcination of the acetylacetonate complex Co(acac)2(H2O)2. TiO2 inverse opals were fabricated by applying the co-assembly method of polymeric spheres of different diameters with water-soluble titania alkoxide, achieving the tuning of the photonic gap, while controlled variation of the concentration of CoOx surface oxides was carried out by successive chemisorption-calcination cycles. Εvaluation of the films photocatalytic performance was carried out in the degradation of methylene blue and salicylic acid as well as the photocurrent production in aqueous electrolyte under visible and UV-visible irradiation in comparison with CoOx-TiO2 mesoporous titania films subjected to the same treatment. Systematic analysis of the modified photonic films’ composition with different experimental techniques showed that the size and porosity of the titania nanoparticles in the photonic crystal walls on which the Co complexes are deposited are crucial for the phase composition of the CoOx oxides. Tuning the slow-light spectral regions with the electronic absorption of the modified photonic films by controlling the macropore size of inverse opals and the concentration of surface oxides CoOx led to a significant enhancement of the photocatalytic activity in the degradation of organic pollutants under visible light, surpassing the performance of mesoporous TiO2 reference films subjected to the same surface modification. The enhancement mechanism was related to the increase of light harvesting through slow photons and the low concentrations of CoOx oxides that allow electronic absorption of visible light and promote charge separation through strong interfacial coupling in the nanocrystalline titania framework of the photonic crystals.In Chapter 4, the controlled deposition of "molecular" FeOx complexes on titania photonic crystals is studied by applying the chemisorption-calcination-cycle method of the Fe(acac)3 complex, with the aim of developing macro-mesoporous FeΟx-TiO2 photonic films with strong photocatalytic response in the visible. Tuning the concentration of surface Fe oxides and the photonic gap in the electronic absorption region of FeΟx-TiO2 inverse opals was done through successive cycles of chemisorption-thermal treatment and selection of appropriate diameters of colloidal polymer spheres in the fabrication of the photonic films. Photocatalytic performance evaluation was perfromed in the degradation of salicylic acid but also in the generation of photocurrent in an aqueous electrolyte under visible and UV-visible irradiation in comparison with mesoporous FeΟx-TiO2 films subjected to the same treatment. The results showed that surface modification of TiO2 inverse opals with low amounts of "molecular" FeOx oxides leads to photocatalytic films with strong performance in salicylic acid degradation under visible light, avoiding the loss of holes’ oxidizing capacity commonly observed in visible light photocatalysts based on TiO2. This enhancement was attributed to the synergy of "slow" photons and surface states created by the strong interfacial coupling between TiO2 and FeOx oxides causing the reduction of the energy gap of the composite system. However, increasing electronic absorption in the visible by increasing the surface oxide concentration acts competitively with photonic amplification, particularly in the case of UV radiation. Photoluminescence and photoelectrochemical impedance measurements showed that the negative effect of FeOx surface modification on the photocatalytic performance of photonic films is due to the creation of localized defect states below the conduction band of TiO2 with a broad energy distribution around the O2/O2 redox potential, which increases electron-hole recombination on the surface of FeOx-TiO2. Fine-tuning the composition of heterostructured photonic metal oxide photocatalysts is a critical factor in the development of efficient photocatalytic films in the visible that combine enhanced light harvesting with improved charge separation. Chapter 5 presents a study of complex photonic structures beyond monolithic inverse opals aimed at improved trapping of visible light for photocatalytic processes. First, the deposition of CoOx-TiO2 bilayer photonic films was studied, which were fabricated using a photonic inverse opal TiO2 substrate of variable diameter on which a mesoporous layer of the best commercial titania photocatalyst Aeroxide® P25 was deposited. Activation of the films in the visible range was implemenetd by their surface modification with "molecular" CoOx complexes. Evaluation of the photocatalytic activity of mono- and bi-layer photonic films was carried out in salicylic acid degradation under visible and UV-visible irradiation. Τuning the energy of the photonic gap and slow photons of the TiO2 substrates in the electronic absorption region of the CoOx surface oxides leads to a significant enhancement of the photoinduced process in the bilayer films through slow light propagation in synergy with Bragg backscattering, outperforming thicker P25 mesoporous titania films. Alternatively, the deposition of a mesoporous titania layer within the monolithic inverse opals was studied, which can act as a planar defect aiming to mitigate Bragg reflection losses, while providing the possibility to widen the slow light spectral region. Visible light activation of the three-layer structures was achieved through their surface modification with low-concentration CoOx “molecular” complexes at various deposition stages in order to optimize visible light absorption. The results showed that three-layer photonic films with the CoOx-TiO2 interlayer exhibit a significant improvement in photocatalytic performance as well as photocurrent intensity accompanied by enhanced charge separation, indicating the beneficial effect of the structural defect on visible light harvesting and photochemical response of the composite photonic structures compared to monolithic photonic films.
Degree
thesis:*- Grantor dc:publisher
- National and Kapodistrian University of Athens
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Toumazatou, Alexia
- Τουμαζάτου, Αλεξία
Subjects
dc:subject × 14Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/54801