Abstract
dc:descriptionThis PhD thesis addresses a major challenge in the field of energy storage for new generation lithium-sulfur battery systems. The subject of the PhD thesis concerns the design of 3D porous carbon structures that acted as matrices for the encapsulation of sulfur (active material of the batteries' cathode), thereby improving the performance of the cathode during battery operation. The critical limitations/disadvantages of the lithium-sulfur battery are related to the low electrical conductivity of sulfur and the dissolution/diffusion in the electrolyte of intermediate polysulfide compounds produced during battery operation and practically lead to reduced capacity and rapid deterioration. In the framework of the phD thesis, the development and study of innovative advanced carbon materials with hierarchical structures as well as their corresponding hybrid materials with metal carbides, are researched. The development of these structures focused on three different fields: A) Chemical activation of biomass (Posedonia oceanica), leading to activated carbon (AC_PG) with hierarchical porosity, high specific surface area and pore volume. B) The development of hierarchical porous carbon structures SA_C and RA_C, which were obtained by complexing and co-precipitating squaric (SA) and rhodizonic acid (RA) with zinc acetate, respectively. Subsequently, the modification of the SA_C porous structure with nitrogen heteroatoms took place, in which the surface chemistry of the carbon was changed to combine chemical and physical adsorption of lithium polysulfides. C)The modification of SA_C, AC_PG and CMK-3 porous carbon structures with boron carbide nanowires (BCnw). The C/BCnw hybrid materials showed very good lithium polysulfide adsorption capacity, which is attributed to the combination of physical adsorption, due to the porosity, and chemical adsorption, due to the BCnw nanowires. In addition, the preparation of composite carbon/sulfur structures was studied for the effective inclusion of high amount of sulfur in the porous matrices of the materials, according to the theoretical percentage of sulfur loanding that each matrix can accommodate. Carbon/sulfur composites were then evaluated as cathode materials in lithium-sulfur batteries, with most of them exhibiting high specific capacity values and performance stability. At the same time, within the framework of this thesis, a modification of a commercial battery separator was carried out. The hybrid material AC_PG/BCnw, showed the best adsorption capacity of lithium polysulfides, compared to the other hybrid materials. As a result, according to the electrochemical measurements, it appears that the cell with the modified separator significantly reduced the dissolution and diffusion of polysulfides, thus improving the battery performance compared to the reference cell, in which there was no modification.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Spyrou, Anastasia
- Σπύρου, Αναστασία
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/54907