Back to search

National Technical University of Athens (NTUA)

Υδρομεταλλουργική ανάκτηση μετάλλων από απορρίμματα πλακετών τυπωμένων ηλεκτρονικών κυκλωμάτων

Abstract

dc:description

Τhe increasing use of electrical and electronic devices leads the mining and processing of raw materials to a critical situation. The industry of electronics uses a great quantity of the mined metal, especially in the production of printed circuit boards (PCBs). Meanwhile, the mining industry fails to meet the needs of the market. As a result, alternative sources of mining, i.e., secondary raw materials, are sought. Waste electrical and electronic equipment (WEEE) is an alternative source of raw material that metallurgical industry has turned to as it is rich in base and precious metals. The applied processes for recycling materials from WEEE are based on pyrometallurgical methods. However, such methods tend to be outdated, due to environmental restrictions set by legislation. In recent years, significant research has been conducted for the development of alternative methods which are environmentally friendly and economically feasible, such as hydrometallurgical methods. This thesis is a first approach to the development of an integrated hydrometallurgical method for the treatment of PCB waste and the recovery of high-value metals, initially on a laboratory and then on a pre-semi-industrial scale. The thesis focused more on the recovery of copper and tin, an important metal with three times the commercial value of copper and inadequate prior research, and on the production of a leached residue, enriched in gold and silver. Despite the fact that this residue could be treated by the established cyanosis method, the recovery of gold and silver from it was also studied, though in less depth, for reasons of completeness and using a different approach. The material used in the present study was a dust, trapped in bag filters during the crushing of PCB waste. The dust was of particle size of less than 0.2 mm and of chemical composition similar to that of the PCBs waste given in the literature. It was received by ECORESET S.A., a greek WEEE recycling company. For the recovery of tin from the material, sulfuric acid (H2SO4) and hydrochloric acid (HCl) were tested as leaching agents. Factors studied included the acid’s concentration, the pulp density, the addition of oxidizing agent (H2O2) and sodium chloride (NaCl), the temperature and the residence time. The recovery achieved was as high as 95%. The tin was extracted from the pregnant solution by hydrolysis and precipitation, the efficiency of which was 98%.For the recovery of copper from the residue of tin leaching, sulfuric acid (H2SO4) and hydrochloric acid (HCl) were tested as leaching agents. Factors studied included the acid’s concentration, the pulp density, the oxidizing agent’s concentration (H2O2), the addition of sodium chloride (NaCl) and the residence time. Copper was extracted from the leached liquor by solvent extraction, using ACORGA M5640. The total recovery of copper exceeded 95%.In the residue of copper leaching, silver existed in the form of chloride salt. Silver chloride was reduced to metallic using an alkalic hydrazine solution, as reducing agent. The factors studied included hydrazine’s concentration, the sodium hydroxide concentration, the temperature and the residence time. Metallic silver was leached in nitric acid (HNO3) in the presence of hydrogen peroxide (H2O2). The total silver recovery exceeded 80%.For the recovery of gold from the residue of silver leaching, aqua regia was tested as leaching agent. The factor studied was the pulp density. Gold was extracted from the pregnant solution by reduction and precipitation. Hydrazine was used as a reducing agent. The total gold recovery was 98%.Based on the laboratory results, a flowsheet was developed and tested in a pilot plant, constructed for this purpose, at a pre-semi-industrial scale. The pilot plant results confirmed those produced on a laboratory scale.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Vlasopoulos, Dimitrios
  • Βλασόπουλος, Δημήτριος

Subjects

dc:subject × 21

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/55045

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Vlasopoulos, Dimitrios; Βλασόπουλος, Δημήτριος. Υδρομεταλλουργική ανάκτηση μετάλλων από απορρίμματα πλακετών τυπωμένων ηλεκτρονικών κυκλωμάτων. National Technical University of Athens (NTUA), 2023. http://hdl.handle.net/10442/hedi/55045