Back to search

Aristotle University Of Thessaloniki (AUTH)

Προστασία και ενίσχυση πηλού

Abstract

dc:description

This PhD thesis deals with the protection and enhancement of clay mortars found in traditional construction. Using various admixtures, such as powders, fibers, polymers, alkaline activators, nanomaterials and various combinations of the above-mentioned materials, a series of tests was carried out to study the physical and mechanical properties of clay mortars made from three different clays. The study focuses mainly on the reduction of absorption, the increase of compressive strength, and overall, in the creation of stable and compact structures. The purpose of the thesis is the creation of new reinforced materials, the proposal of new methods for testing the durability of these mortars, with the aim of both use in existing monumental constructions, and as a proposal for use in modern construction. Moreover, an attempt is made to protect the structure through surface treatment, with the methods of coating and impregnation to prevent moisture absorption. In addition to the basic tests carried out to study the mechanical and physical properties based on the regulations for traditional materials, tests created in the context of this research were added to the thesis. The most important of these tests were the cycles of durability, which contained several particularities, as the nature of clay mortars is quite sensitive and would not be able to cope with the existing regulations. The application of the durability tests developed in this thesis made it possible to study and investigate the compositions of clay mortars in various environmental conditions. From the results of the thesis, it appears that the reinforcement of these sensitive structures is possible, while the most positive results in compressive strength appear from the use of alkaline activators, offering a great increase. Moreover, the addition of fibers through various processing methods appears to strengthen the structure by increasing both mechanical and physical properties, with hemp fibers exhibiting a particularly cohesive structure. Similarly, the use of polymers, such as Sika ViscoBond and PRIMAL™ TX-100 products, succeeds in improving mechanical and physical properties, while the use of plasticizers is not proven to be as beneficial in terms of improving fresh properties. In the case of nanomaterials, the combination of admixtures of nanoclay and latex powder (DOW™ Latex Powder) seems to be more efficient compared to the use of nanoclay alone, both in mechanical characteristics and durability tests. From the use of various powders, the beneficial effect of bentonite is established in several properties, while the use of flying ash and blast furnace slag was shown to have a negative effect. The use of alkaline activators, as mentioned, yielded more positive results in the mechanical characteristics, however, the high absorption of the samples is considered problematic. Therefore, the combination of admixtures that worked more positively on the mechanical characteristics on the one hand and more positively on the physical characteristics on the other, was carried out to produce stable structures. Combinations of potassium metasilicate with nanoclay and PRIMAL™ TX-100 acrylic emulsion performed very positively, reducing absorption, and increasing mechanical properties. Finally, the use of surface agents can protect clay structures over time, enhancing its physical properties, while the effect of roughness on the wettability of surfaces is also evident. Furthermore, in the thesis an attempt was made to correlate the values of the capillary absorption coefficient c with the lateral absorbance through Karsten tubes, as well as with the absorbance resulting from the control of open porosity. Also, an attempt was made to correlate the factors of the compressive strength σc with the open porosity n, as well as with the oxide ratios, as obtained from the analysis through the EDS system of the scanning electron microscope (SEM). From these correlations, the existence of a linear correlation is observed between the absorbency and the capillary absorption coefficient, as well as the existence of an inversely proportional weak linear correlation between the open porosity and the compressive strength. However, the correlation of the compressive strength with the SiO2/MgO oxide ratio is of interest, as a stronger linear correlation is detected between the two factors compared to the other oxide ratios. The results obtained from this thesis will help in the development of new compositions with enhanced properties, with competent use in both existing and new constructions. In addition, the research can be used to the next level to develop new products, such as reinforced adobes, as well as new methods for studying clay systems, adding data for the development of global standards/regulations for this quite diverse material.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Karozou, Aspasia
  • Καρόζου, Ασπασία

Subjects

dc:subject × 15

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/55105

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Karozou, Aspasia; Καρόζου, Ασπασία. Προστασία και ενίσχυση πηλού. Aristotle University Of Thessaloniki (AUTH), 2023. http://hdl.handle.net/10442/hedi/55105