Back to search

Aristotle University Of Thessaloniki (AUTH)

Development of novel biobased, 3D printable polymeric materials with antibacterial properties

Abstract

dc:description

The aim of this study was to produce novel photocurable polymeric materials from renewable resources, suitable for 3D printing applications. In the quest toward sustainable thermosets, different polymer classes have been investigated such as epoxy, benzoxazines and (meth)acrylates. However, one particular group that has attracted attention is unsaturated polyester resins based on itaconic acid. These materials are simple to synthesize, they have reasonable cost and their properties are highly tunable. Therefore, in this thesis we tried to extend the field of applications of these materials, by investigating in depth all the elements that could affect the performance of itaconic acid-based materials. The first chapter of the thesis investigates the effect of the chemical structure on the polyesters, their formulations and the 3D printed materials. The first parameter that was investigated was the content of itaconic acid. High contents resulted in polyesters of increased double bond density that were highly reactive towards UV-light. That led to materials of dense crosslinking network, with increased glass transition and enhanced mechanical behavior, but simultaneously rigid and brittle. The second investigated parameter was the secondary comonomers. Aromatic comonomers reduced the mobility of the polymer chains and increased the viscosity of the resins, as a result of the increased rigidity compared to systems with aliphatic comonomers. That was transferred to the reactivity of the formulations, as the rigid systems reached gelation earlier and the overall conversion of the double bonds was lowered, reducing the mechanical performance of the 3D printed specimens. Beside the aromatic-aliphatic prospect, we also investigated the influence of intermolecular interactions between the polyester chains, by introducing monomers that could enhance them such as amido diols. We found that while the physicochemical properties of the polyesters were influenced by those interactions, the thermomechanical behavior of the 3D printed materials was not benefited. In the second chapter we investigated the effect of the reactive diluent on the reactivity of the formulations and the thermomechanical performance of the 3D printed materials. We discovered that the diluent content on the formulations can be used to successfully tune those properties, as it could affect the overall conversion of the double bonds, the thermal stability and the printability of such formulations. We also examined the combined use of two reactive diluents as a possibility to prepare materials with different properties. By selecting the proper ratio between the two diluents, the reactivity towards UV light, the mechanical performance and the surface properties of the fabricated samples could be controlled. In the third and final chapter of the thesis, we investigated the effect of reinforcing agents on our biobased systems. We studied fillers of the nano and micro scale, of different chemical structure and geometry at various contents. We examined their introduction during polymer preparation, via the in-situ synthesis of nanocomposite polyesters, and during formulation preparation as a third component. The results showed that for a reinforcing agent to be effective, the reactivity of the formulation under UV-irradiation should not be obstructed. Meeting this prerequisite enabled the production of materials with enhanced mechanical behavior compared to pristine polyesters. The possibility of producing 3D printed materials with bactericidal activity the through the introduction of suitable nanofillers was also investigated. It was discovered that increasing the content of fillers compromised the reactivity of the formulations.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Papadopoulos, Lazaros
  • Παπαδόπουλος, Λάζαρος

Subjects

dc:subject × 14

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/55162

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Papadopoulos, Lazaros; Παπαδόπουλος, Λάζαρος. Development of novel biobased, 3D printable polymeric materials with antibacterial properties. Aristotle University Of Thessaloniki (AUTH), 2023. http://hdl.handle.net/10442/hedi/55162