Back to search

National Technical University of Athens (NTUA)

Σχεδιασμός, ανάπτυξη και χαρακτηρισμός νέων ημιαγώγιμων υβριδικών (ανόργανων-οργανικών) συστημάτων

Abstract

dc:description

The aim of the Thesis was the design and development of new hybrid (inorganic-organic) semiconductive systems based on cadmium chalcogenides, in the form of polycrystalline thin films on conductive substrates (Ti), for semiconductor applications and new-generation photovoltaic/photoelectrochemical cells. The synthesis of the new systems was carried out by two methods: electro-codeposition, where the inorganic and organic part of the semiconductor were simultaneously included in the original electrolytic bath, and that of multi-layered deposition, where successive depositions of the inorganic (electrodeposition) and the organic (spin coating technique) part were carried out to form the final system. Various organic substances, such as fullerene salts and derivatives, ferrocene and its derivatives, as well as low-cost commercial organic salts, were used for the hybridization of Cd chalcogenides. The inorganic part of the hybrids, consisting of CdSe, CdTe or Cd(Se, Te) thin films, was synthesized by cathodic electrodeposition (under direct or pulse current regime, D.C. or P.C.) from acidic aqueous baths, which contained suitable reducible forms of the required element ions, each time. Thesis begins with a general introduction to its subject, the objectives set and its contribution to scientific research in the field of hybrid semiconductors. In the first chapter, reference is made to the basic principles of semiconductors and the most important types of diodes they form. In the second chapter, basic data for the photoelectrochemistry of semiconductors are mentioned and a brief literature review is made for the most important studies that have been done on the photoelectrochemical properties of Cd chalcogenides. In the third chapter, a general description of electrodeposition technique under D.C. and P.C. conditions is given and key concepts are highlighted. The basic models that have been proposed for the electrolytic co-deposition of elements are also presented and a brief literature review on the electrolytic deposition of CdSe and CdTe is given. In the fourth chapter, the main categories of hybrid (inorganic-organic) semiconductors are mentioned and examples of hybrid systems based on Cd chalcogenides are listed. The experimental part begins with the fifth chapter, where the experimental procedure followed and the methodology developed for the synthesis of the hybrid systems are described. The preparation stages of the electrodes surface are analyzed and the experimental setups used are, also, described. Furthermore, a brief description and analysis of the characterization methods operating principles is provided. The structural and crystallographic characterization of the samples was carried out by X-ray diffraction and the study of their surface morphology was done by scanning electron microscopy (SEM). An X-ray dispersion analyzer (EDS) was used to estimate the elemental composition of the films. Bad-gap determination was carried out by diffuse reflectance spectroscopy (UV/Vis/NIR spectrophotometer, equipped with an integrating sphere). Finally, the photoelectrochemical behavior of the new materials obtained was studied by a photoelectrochemical cell (PEC). The final evaluation of the semiconductors was conducted by the combination of all the above measurements and characterization results. The experimental research conducted can be divided into four experimental work sections. The first section is presented in the sixth chapter and includes the determination of the reference systems, the pure inorganic systems CdSe and CdTe. The study carried out determines the properties and the photoelectrochemical behavior of the electrodeposited CdSe and CdTe thin films, in order to compare them with the new hybrid systems. In the second section of experimental work (seventh chapter) the development – by the co-deposition method – and the characterization of hybrid semiconducting systems is presented, by combining Cd chalcogenides either with a fullerene derivative or with the organometallic compounds ferrocene (Fc) and ferrocenaldehyde (FcCHO). The third section (eighth chapter) describes the attempt made to continue and expand the experimental work of the second section, using instead of fullerene and organometallic compounds, low-cost and commercially available water-soluble organic salts, which act as additives. Of the five different additives used, oxalate salt was judged as a suitable additive for Cd chalcogenides, which especially in the case of CdSe had a decisive effect, as it contributed to the development of a hexagonal crystal structure. In the ninth chapter, the fourth section of experimental work is presented, which concerns the synthesis, through the multi-layer deposition technique, of hybrid double-layered and three-layered semiconductive systems based on Cd chalcogenides, utilizing for the organic part either fullerene derivatives or the organometallic compounds Fc and FcCHO. Finally, based on the optimal results obtained, combinatorial systems were designed and synthesized in order to further enhance the semiconductive characteristics of Cd chalcogenides. Considering all the results, it appeared that the choice of the optimal synthetic route depends on the type of organic molecules to be exploited. Thus, in the case of fullerene derivatives, the systems developed by the co-deposition method showed better photoelectrochemical behavior and improved properties, while in the case of the organometallic compounds those developed by the multi-layered deposition technique. The optimal properties were presented by the combinatorial three-layered system CdSe/Oxalate -Fc-CdSe/Oxalate, whose performance was five times that of the conventional monolayer CdSe.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Mitzithra, Christina
  • Μιτζήθρα, Χριστίνα

Subjects

dc:subject × 12

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/55330

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Mitzithra, Christina; Μιτζήθρα, Χριστίνα. Σχεδιασμός, ανάπτυξη και χαρακτηρισμός νέων ημιαγώγιμων υβριδικών (ανόργανων-οργανικών) συστημάτων. National Technical University of Athens (NTUA), 2023. http://hdl.handle.net/10442/hedi/55330