National Technical University of Athens (NTUA)
Ενθυλάκωση βιοδραστικών ενώσεων σε φυσικά πολυμερή με εφαρμογή καινοτόμων μεθόδων νανοεγκλεισμού
Abstract
dc:descriptionThe aim of this PhD thesis was to study the innovative electrohydrodynamic process for the encapsulation of bioactive compounds. The compounds of interest were deoxycholic acid, a secondary bile acid, and the extract derived from hydroponic tomato cultivation by-products, while the encapsulation products were also exploited by incorporating them into a cosmetic product and a film for food packaging, respectively. In the case of the extract, leaves and stems from hydroponic tomato cultivation were freeze-dried and extracted using various extraction methods to receive and evaluate their bioactive content. The leaves had the richest content in bioactive components, while the combination of stirring for 72 hours with the subsequent use of ultrasounds to receive the remaining entrapped bioactive compounds stood out among the extraction methods studied. This leaf extract was further studied using High-Pressure Liquid Chromatography for the identification of flavonoids (mainly rutin), carotenoids (mainly lutein and β-carotene)) and the alkaloids tomatine-tomatidine, indicating its antioxidant and antimicrobial activity. A detailed study of the electro-hydrodynamic process and its two aspects, electrospraying and electrospinning, followed. Initially, solutions of various polymers (hydroxy-propyl-β-cyclodextrin, polylactic acid, chitosan and zein) were applied to the equipment, studying different combinations of operating conditions and polymer concentrations regarding their ability to form a product and its morphology. Among these polymers, zein gave the most interesting results by leading to the formation of both discrete particles and uniform fibers when changing its concentration and for several combinations of operating conditions. Experiments, to select the optimal ethanol-water solvent ratio and protein concentration to obtain both configurations (particles and fibers) followed. Of the ethanol/water mixtures, the 90/10 (v/v) ratio was found to be the most ideal for electrospraying and the 80/20 (v/v) ratio for electrospinning based on the solutions’ properties (surface tension, electrical conductivity and viscosity). Subsequently, the effect of the operating parameters of the process on the diameter of the structures was examined. As observed, increasing flow rate and concentration led to structures with larger diameters while, conversely, increasing distance and applied voltage led to a decrease in diameter. From the combined study of these parameters, the concentrations of 10 and 25% (w/v) were selected to obtain the optimal particles and fibers, respectively, from zein. In the next step, the encapsulation of the bioactive ingredients was performed and the process was optimized to achieve the maximum encapsulation efficiency (EE%) using the central composite design. For comparison purposes, the active agents were also encapsulated by applying the conventional spray drying method with the same encapsulation matrix. For this process, optimization was also performed to achieve the maximum possible EE%. The highest EE% was measured for the electrospraying product, followed by the electrospun fibers, the spray dried particles of the encapsulated deoxycholic acid and finally of the extract. In total, EE% ranged between 79 and 93% for all the samples. The encapsulation products were, then, evaluated in terms of their structure-morphology with the nanofibers of the encapsulated extract showing the smallest diameter (0.32 ± 0.083 μm) followed by the nanoparticles of deoxycholic acid (0.37 ± 0.09 μm) while spray drying gave structures between 7.5-8.5 μm. In addition, through differential scanning calorimetry, the stability of the glass transition temperature of the nanoparticles and nanofibers was observed, which ranged from 129-145 ℃ regardless of the samples’ previous placement in different humidity control chambers (aw=0.11-0.95) and temperature (25 and 45 ℃). In contrast, the spray-dried structures appeared more susceptible to moisture absorption. Commonly used models describing water sorption isotherms (GAB, BET, Oswin, Halsey) were applied to these samples and it was shown that the GAB model had the best fit to the data for both samples stored at 25 and 45 ℃. The study of the structures using Fourier transform infrared spectroscopy showed that the characteristic peaks of the matrix remained unchanged by the encapsulation process while characteristic peaks of the components were identified for all the products, confirming their successful encapsulation. Subsequently, the release of the components in a solvent environment and also during storage in chambers of different relative humidity was studied. Regarding the release in a solvent environment, this was observed to be significantly faster for the encapsulated products through spray drying. Between the two products of the electro-hydrodynamic process, the nanoparticles showed a slightly faster release of the substance than the nanofibers. Regarding the release from the chamber of different water activities, this proved to be slower for all samples compared to the release from the solvent environment. In addition, the release rate was greater for the encapsulated bioactives through spray drying followed by those from electrospraying and finally electrospinning, showing the same behavior with the release in the solvent environment. In addition, entrapment of the bioactives inside the matrix and inability to release due to structure collapse for the samples placed in chambers of RH 75-95% was observed for the spray drying products. Subsequently, the encapsulation products derived from the electro-hydrodynamic process were utilized for the production of consumer products. More specifically, the electrosprayed nanoparticles of deoxycholic acid were incorporated into an oil-in-water emulsion to prepare a cosmetic cream. The formulation was studied for its appearance, color, pH, microbiological stability and rheological characteristics during storage at 5, 25, 37 and 45 ℃ for three months compared to the same cream without the incorporation of the encapsulated bioactive. The results showed that the addition of the ingredient did not alter the characteristics of the cream, its microbiological stability was maintained and small color changes were observed while the pH ranged between 4.45-5 for all the samples. Regarding its rheological characteristics, the complex viscosity showed a slight change compared to that of the simple base cream, while satisfactory values were also measured over time in the different storage conditions (|η*|≥ 1.24 MPa·s for ω=0, 1 1/s at t=90d at 45℃). As for the storage (G') and loss (G'') modulus, the relationship G'> G'' was maintained for the entire range of angular frequencies measured, indicating the existence of a stable formulation. As for the encapsulated tomato leaf extract in electrospun zein nanofibers, it was used as a thin coating for biaxially oriented polypropylene to form a bilayer packaging film. The two layers were stabilized together through chemical and mild heat treatments. The final film was evaluated for the morphology of the fibers which appeared flattened due to the treatment they underwent, without however resulting to a collapse of their structure and with the observation of only a small loss of encapsulated extract (≈4.6%). The produced film was used for tomato packaging in comparison with plain polypropylene film. Samples were stored at 5℃, room temperature and 45 ℃ and were, daily, measured for their color, weight loss, pH, total bacterial count-yeasts/molds and their sensory properties. The results showed that the fruits packed with the bilayer film developed microbial load more slowly, leading to an extension of shelf life by 1-3 days. Finally, a life cycle assessment (LCA) study was presented for the cosmetic formulation and the packaging film with the encapsulated bioactive ingredients in terms of the environmental footprint of the processes required compared to the production of conventional materials. Regarding the cosmetic cream, LCA focused on the production of the cream and the encapsulation with the study showing the increase in the environmental footprint with the addition of the encapsulated bioactive ingredient. Accordingly, regarding the production cost, it was estimated to be higher by €0.045/cosmetic formulation for the cream with the bioactive ingredient compared to the base cream (estimated at €0.20/cosmetic formulation). However, this study did not include efficacy data from the use of the substance that would offset this increase. Regarding the packaging film, the environmental footprint of the active material was compared with that of the conventional film for all stages, from the harvest of the leaves to the result of their use. Functional film demonstrated better environmental performance at all stages of the supply chain apart from the production stage compared to plain film, which was offset by the benefits of utilization of agricultural by-products to create value-added materials and extend the shelf life of the packaged products. In terms of economic evaluation, the production cost of the bilayer film was estimated to increase by €0.36/kg film.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Panagiotopoulou, Margarita
- Παναγιωτοπούλου, Μαργαρίτα
Subjects
dc:subject × 24- Ενθυλάκωση
- Ηλεκτρο-υδροδυναμική διεργασία
- Ηλεκτροστατική ινοποίηση
- Ηλεκτροστατικός ψεκασμός
- Δεοξυχολικό οξύ
- Παραπροϊόντα καλλιέργειας τομάτας
- Φυσικά πολυμερή
- Ζεΐνη
- Καλλυντική κρέμα
- Συσκευασία τροφίμων
- Encapsulation
- Electrohydrodynamic process
- Electrospinning
- Electrospraying
- Deoxycholic acid
- By-products of tomato cultivation
- Natural polymers
- Zein
- Cosmetic cream
- Food packaging
- Άλλες Φυσικές Επιστήμες
- Φυσικές Επιστήμες
- Other Natural Sciences
- Natural Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/55332