Back to search

National Technical University of Athens (NTUA)

Recycling of precious metals from automotive catalytic converters with hydrometallurgical methods

Abstract

dc:description

Every modern vehicle equipped with an internal combustion engine possess catalysts (Τhree-Way Catalytic Converters for petrol engines, or Diesel Oxidation Catalysts for diesel engines), in order to reduce efficiently the emission of harmful compounds like carbon oxides (CO), hydrocarbons (HC) and nitrogen oxides (NOx). Car manufacturers mainly use platinum group metals (PGMs) such as platinum, palladium and rhodium to perform these catalytic functions. In general, the platinum group metals are comprised of six similar elements: iridium, osmium, palladium, platinum, rhodium and ruthenium. These elements are included by the European Commission in the list of critical raw materials, based on their economic importance and supply risk. The long-term demand fundamentals for PGMs are strong, with their consumption closely related to the global green energy transition and imposition of stricter emissions standards – particularly in the automotive sector. Recycling could contribute to the reduction of supply risk and increasingly cover the future PGM demands in the EU and globally. Moreover, concerning the advantages of recovering precious metals over their mining, these are mainly their limited resources, scarcity, expensive and energy-intensive mining process and the significant amount of waste generated during this process. Platinum group metal ores contain very small amounts of these metals. For example, in South Africa (the largest producer of platinum), PGM bearing ores have a low content of between 2 and 6 g/t . At the same time, it should be noted that automotive catalytic converters typically contain up to 2000 g/t PGM in the ceramic catalyst brick, the active part of the converter. Therefore, due to the high value of PGMs and the fact that autocatalysts comprise a rich source of PGMs, the attractiveness to recover those metals from end-of-life products such as spent autocatalysts, is extremely high. In the specific thesis, an industrial driven, integrated circular economy model is proposed for the sustainable valorization of platinum group metals (PGMs) contained in automotive catalytic converters. The 4 main steps of the cycle are, a) pre-processing, b) leaching/recovering c) new catalyst preparation from recovered (impure) material, and d) introduction to the market of the new catalysts. The circular economy model is based on leaching/recovering of PGMs with an industrially optimized hydrometallurgical method from spent automotive catalytic converters and the preparation of new catalyst from recovered material. State of the art methods, principles and theory on PGMs extraction are described in detail providing an insight of the advantages and difficulties of each process. Several parameters, such as temperature, acidity and time, have been studied and examined for the hydrometallurgical method to be optimized for automotive catalysts. A novel hydrometallurgical process has been developed, resulting in recovery rates for Pt, Pd and Rh, namely, 100%, 92% and 61%, respectively. In order to highlight the importance and significance of recovering PGMs, alternative secondary sources, such as membrane electrode assemblies from spent fuel cell and electrolyzers and emission control devices derived from Euro6 heavy duty vehicles have been examined. Recovered material has been used to produce new three-way catalysts and diesel oxidation catalysts and their catalytic activity has been validated on a synthetic gas bench. Their performance has been discussed in terms of commercial benchmarks. Finally, the essential market analysis has been conducted for the manufacturing of automotive catalytic converters (ACC) integrating 100% recycled PGMs

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2023

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Yakoumis, Iakovos
  • Γιακουμής, Ιάκωβος

Subjects

dc:subject × 14

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/55343

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Yakoumis, Iakovos; Γιακουμής, Ιάκωβος. Recycling of precious metals from automotive catalytic converters with hydrometallurgical methods. National Technical University of Athens (NTUA), 2023. http://hdl.handle.net/10442/hedi/55343