National Technical University of Athens (NTUA)
Hovering helicopter interaction with the ground and bluff bodies: a CFD based investigation
Abstract
dc:descriptionThe interactive phenomena that occur when a helicopter is hovering in proximity to the ground and bluff bodies are addressed in this thesis. The work is motivated by the limited bibliography on this topic. Several surveys have been conducted both experimental and computational, however a systematic work that categorises and classifies the interaction between the rotor and the ground/bluff bodies is missing. The present work takes into consideration several experimental campaigns, analyses the results and then by using tools of different fidelity tries to reproduce the measurements. Through this process the conclusions that are ex- tracted are consistent and complimented by the different experiments but also by the computations. When a helicopter takes off or lands, its wake interferes with the ground and obstacles. This interaction, depending on the height-to-rotor diameter ratio, causes the altering of the rotor loading and performance as compared to the unconstrained case and gives rise to the development of a complex outwash flow field in the surrounding of the helicopter. When a helicopter hovers outside the ground effect, the jet flow of the main rotor and the strong tip vortices of the wake travel un- constrained below the rotor. As the rotor starts to approach the ground or an obstacle the jet flow and the vortices interact with the surrounding environment. That leads to the development of boundary layers on the surfaces of solid boundaries which eventually change the flow field. In these cases different shear layers interact with each other causing the formation of strong vortex structures that are close to the helicopter. The above phenomena are investigated in scaled down helicopter models. Both the dimensions of the rotor and the obstacle are scaled down in order to resemble the interactions between a helicopter and a building. This mach scaled models were than used to experiments conducted by the Politecnico di Milano, the University of Glasgow, and Onera in low Reynolds numbers (below 25000). All the experimental campaigns concerned similar cases but with different parameters. The results that have been provided are then processed and normalised in order to be categorised. To support this categorisation, measurements were than compared against numerical predictions. Two different tools have been used. The first is a medium fidelity potential solver. Solid boundaries are treated as inviscid surfaces and the wake is modelled as free vortex particles. The velocity field is obtained by solving with a particles mesh technique two Poisson equations. This solver was used for simulating the majority of the cases because of its time efficiency. The comparison between preliminary predictions of the potential solver against the experiments revealed the limitations of the solver due to its inherently inviscid character. However, this limitations confirmed the first conclusion that extracted from the experimental data. In the direction of overcoming the above limitations and further analyze the phenomena a high fidelity hybrid solver was exploited. The hybrid solver couples through an iterative scheme an Eulerian formulation of the Navier-Stokes equations with a Lagrangian description of the flow field taking in advantage the particle approximation. The above tool can handle the solid boundaries in which the viscous phenomena are created as independent entities by creating a spatial grid of reduced length around them, while the far field is expressed as a material field. In this manner all boundary conditions are met (both the sold and far field boundaries). Simulations of the hybrid solver performed in specific cases (those that the potential solver could not reproduce) as the computational cost is excessive. The results comparing to the experimental data, confirmed the original hypothesis and helped to dive into deeper analysis of the physical mechanisms that dominate the flow around a hovering helicopter in proximity to solid boundaries.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2022
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Andronikos, Theologos
- Ανδρόνικος, Θεολόγος
Subjects
dc:subject × 8Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/55739