Aristotle University Of Thessaloniki (AUTH)
Design of electronic circuits for IoT applications
Abstract
dc:descriptionWith the emergence of the Internet of Things (IoT) era, the development of an infinite number of services and applications has become achievable. The employment of a variety of sensors in IoT systems is widespread in applications involving healthcare, environmental monitoring, weather forecasting, traffic flow etc. Since most sensor systems are installed in remote and hard-to-reach environments, where they are expected to operate for extended periods without the frequent need of battery replacement, their energy efficiency is a critical parameter. Thus, various design techniques and improvements have been utilized to prolong the operation of these systems, such as an intermittent style of operation of the sensors, the utilization of energy harvesting from environmental power sources, as well as the minimization of the power consumption of the sensor electronics. It is essential that the energy efficiency aspect of design does not interfere with the effective operation of the sensing system, i.e., the low-noise operation is not traded off for the low-power operation. Therefore, a combination of these two typically counteractive design characteristics is attempted. As a case study, an electric field mill sensor, which is a sensor that is typically installed in remote areas and should operate for extended periods, is examined in a weather forecasting application. Additionally, the piezoelectric element, which is widely employed as a sensor in inaccessible environments (bridges, roads, building surfaces) is examined in applications where its ability to also act as an energy harvester is exploited to design self-powered IoT sensing systems. In the beginning of this dissertation, the description of the electric field mill sensor’s most significant design characteristics as well as its non-idealities which can affect its sensitivity, or its efficient operation is provided. Both a discrete and an integrated implementation of the prototype sensor’s interface circuitry are designed, taking into consideration the low-noise requirement for the preamplification stage and the low power consumption of the entire system. Next, an overview of Maximum Power Point Tracking (MPPT) techniques and algorithms employed in energy harvesting systems that can enable the energy-autonomous operation of sensing systems is provided and the design of circuits that are embedded in such systems is presented. An energy harvesting module that can supply the operation of a Wireless Sensor Node and a low-power field mill sensor and its analog readout is tested in real conditions. In addition, the capability of the piezoelectric transducer to be utilized both as a sensor and as an energy harvester is examined and tested in two applications; the first is a Weigh-in-Motion sensing circuit, where the transducer is also employed in an energy harvesting module and the second is a Maximum Power Point Tracking technique implementation for piezoelectric energy harvesters. Finally, the conclusions derived from this work as well as future research directions are discussed.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Agorastou, Zoi
- Αγοραστού, Ζωή
Subjects
dc:subject × 20- Συστήματα αισθητήρων χαμηλής κατανάλωσης
- Ηλεκτρονικά κυκλώματα διεπαφής αισθητήρα
- Κυκλώματα συγκομιδής ενέργειας
- Εντοπισμός σημείου μέγιστης ισχύος
- Low-power sensor systems
- Sensor interface electronic circuits
- Energy harvesting circuits
- Maximum power point tracking
- Φυσική
- Φυσικές Επιστήμες
- Εφαρμοσμένη φυσική
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Ηλεκτρική και Ηλεκτρονική μηχανική
- Physical Sciences
- Natural Sciences
- Applied Physics
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Electrical and Electronic Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/55856