Back to search

Aristotle University Of Thessaloniki (AUTH)

Ανάπτυξη, χαρακτηρισμός και βελτιστοποίηση ιδιοτήτων μικρο- και νανο- σύνθετων τανυσμένων ινών πολυπροπυλενίου

Abstract

dc:description

In the present study, various systems of composite and nanocomposite drawn polypropylene fibers with talc, wollastonite, attapulgite, single-wall carbon nanotubes and modified montmorillonite were investigated. Initially, a range of additives were studied for their effect on the final properties of polypropylene composite drawn fibers. Also, the interactions among additives, such as the antioxidant and the compatibilizer were studied, highlighting the importance of the nature of the additives (polar or non-polar) and the effect of their interactions on the final properties of the composite fibers. It was found that all inorganic additives, except attapulgite, show a positive effect on both the thermal stability and the mechanical properties of the composite drawn fibers. The modification of the wollastonite’s surface, using various organic acids, and the use of the modified wollastonite as a reinforcement additive of drawn polypropylene fibers were studied. Initially, the effect of a polar and a non-polar solvent on the surface modification of wollastonite was investigated. Subsequently, the modification of the wollastonite’s surface with various organic acids and the effect of the modified wollastonite on the thermal and mechanical properties of drawn polypropylene composite fibers were studied. It was found that modified wollastonite has a non positive effect on mechanical strength of the composite drawn fibers. Consequently, in the subsequent study, a commercial compatibilizer was used, i.e. PP grafted with maleic anhydrite, and the development of PP-wollastonite drawn composite fibers was studied using design of experiments. The effect of wollastonite’s content, the content of the compatibilizer masterbatch and the drawing ratio were studied. It was found that the drawing ratio shows the most significant effect on the mechanical strength, followed by the positive effect of the wollastonite’s content. The addition of the compatibilizer itself has a negative effect on the tensile strength, due to the lower molecular weight of the polymer matrix that hinders the drawing of the polymer chains. Afterwards, the properties of composite drawn fibers with talc and composite drawn fibers with carbon nanotubes were studied. It was found that at high drawing ratios (i.e. 9) the positive effect of talc that was observed at low drawing ratios (i.e. 7) was reversed. The study of composite drawn fibers with carbon nanotubes was focused on the effect of the antioxidant content and the limits of the positive effect of drawing on the thermal and mechanical properties of the composite drawn fibers. It was shown that for drawing ratios approximately above 18 the positive effect of drawing was reversed, possibly due to overstretching of fibers. Finally, aiming the developing nanocomposite fibers, the use of two kids of organically modified montmorillonite, i.e., Cloisite 10A and 15A, as reinforcement agents was studied, similarly to the investigations mentioned above, using design of experiments. The effect of the additive content (from 0 to 2%), the compatibilizer mastebatch content (from 0 to 4%) and the drawing temperature (from 100 to 140 °C) was studied. Using the maximization of the tensile strength as a single criterion, it was found that the optimum drawing temperature is 110 °C. Moreover, the XRD patterns show that a structure with fully exfoliated montmorillonite layers was achieved for both examined clays.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Leontiadis, Konstantinos
  • Λεοντιάδης, Κωνσταντίνος

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/55890

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Leontiadis, Konstantinos; Λεοντιάδης, Κωνσταντίνος. Ανάπτυξη, χαρακτηρισμός και βελτιστοποίηση ιδιοτήτων μικρο- και νανο- σύνθετων τανυσμένων ινών πολυπροπυλενίου. Aristotle University Of Thessaloniki (AUTH), 2024. http://hdl.handle.net/10442/hedi/55890