National and Kapodistrian University of Athens
Πλήρης σχεδιασμός με Η/Υ (εννοιολογικός - προκαταρκτικός - λεπτομερής), κατασκευή, πτητικές δοκιμές και τεκμηρίωση, πλήρως 3D εκτυπωμένου UAV σταθερής πτέρυγας
Abstract
dc:descriptionThis work represents a multidisciplinary research in the broader mechanical engineering / aeronautical engineering and computer science / telecommunication science fields, which merges the knowledge the author has obtained from the undergraduate programs of Aeronautical Engineering (Psachna, 2021) and Informatics Technology and Telecommunication (Larisa, 2006). This researches’ main objective is to implement a complete design process using computer software, with the furthest result to construct an Unmanned Aerial System (UAS), whose Unmanned Aerial Vehicle (UAV) form a fully 3D printed small fixed wing aircraft named “Euclid”. Traditionally, the main materials used for small UAV’s, such as “Euclid”, were balsa wood, various types of foams, synthetic materials (carbon fiber, glass fiber, Kevlar etc.) or a combination of some or all these materials, depending on the needs of each design. With the rapid spreading of the FDM (Fused Deposition Modelling) 3D printers, some UAV designers, out of Greece, managed to successfully construct fully 3D printed small fixed wing UAV’s in recent years. “Euclid” UAV is the first such 3D printed system, which was designed, constructed, tested, and documented in Greece. This Current study covers all the aspects of the lifecycle of such a system. Specifically, it covers in detail, all three stages of design (conceptual, preliminary, detail), it moves on to flight tests, it gives a detailed documentation of the system in the utilization phase, and finally it provides the online 3DPUAVCalc (3D Printed UAV Calculator) software which helps the designers of similar systems to quickly calculate some aspects of the design process. The methodology used in all stages is based on aviation literature/bibliography and it specializes, where needed, into the special needs of electric propulsion, and/or into the specific needs of a 3D printed UAV. New models and methodologies were developed to cover some of those gaps in the global aviation literature/bibliography such as: the initial sizing of a 3D printed fixed wing UAV, the airfoil selection of a small number of Reynolds fixed wing UAV, the determination of the handling qualities of such an UAV using the Cooper & Harper scale via computer based flight simulation of the vehicle, the Radar Cross Section (RCS) of such a small fixed wing UAV, etc. Some of these novelties were published, as articles, in international scientific journals. In this work, care has been taken for all the third party used software’s (10 in total), to be freeware, either under an open type of license, or under a student license for academic purposes. This choice helps any reader who is willing to reproduce, to extend or to start a new similar 3D printed UAV design. As a result of the current venture, the “Euclid” UAV has been presented which has a wingspan of 2 m and a mass of only 2 kg. Its payload consists of a camera which can be used for security, surveillance, and reconnaissance applications. The overall cost of the system is a fraction of the cost of a commercial system with similar performance. The cost reduction can be as high as 75% in some cases. The time needed for the Production / Construction Phase of a copy of the Euclid UAV is very little, as it requires about a week to print and assemble one UAV, by only one person without specialized technical skills, using one common 3D Printer. This period of time can be further reduced to a couple of days when multiple 3D printers are being used in parallel/at the same time. Another advantage of the system is that no special Ground Control Station (GCS) is required for its operation. A common laptop or tablet can be used for this purpose. The main findings of the system’s performance are summarized into 2 h of endurance and a one-way range of about 50 km (100 km in total).
Degree
thesis:*- Grantor dc:publisher
- National and Kapodistrian University of Athens
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kapoulas, Ioannis
- Καπούλας, Ιωάννης
Subjects
dc:subject × 24- Σχεδιασμός αεροσκαφών
- Συτήματα μη επανδρωμένων αεροσκαφών
- Σταθερής πτέρυγας
- Τρισδιάστατη εκτύπωση
- Προσομοίωση σε ηλεκτρονικό υπολογιστή
- Aircraft design
- UAV
- Fixed wing
- 3d printed
- Computer simulation
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Υπολογιστές, Υλικό (hardware) και Αρχιτεκτονική
- Μηχανική και συστήματα επικοινωνιών, Τηλεπικοινωνίες
- Επιστήμη Μηχανολόγου Μηχανικού
- Αεροδιαστημική μηχανική
- Μηχανολογία
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Computer science, Hardware and Architecture
- Communication engineering and systems, Telecommunications
- Mechanical Engineering
- Aerospace Engineering
- Mechanics
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56001