Aristotle University Of Thessaloniki (AUTH)
Simulations and design of photonic circuits and setups with the SiN platform
Abstract
dc:descriptionThe silicon nitride (Si3N4) platform for photonic integrated circuits has been the subject of intensive research efforts. Over the years it has exhibited low propagation losses, large transparency window, high tolerance to temperature variations, and low fabrication and processing cost, coming from its compatibility with the CMOS technology for the realization of integrated optical circuits. For this reason, the platform has contributed to the demonstration of Photonic Integrated Circuits (PICs) for a very large variety of applications such as refractive index sensors, microwave filters, multiplexers, and others, based on its elevated passive optical characteristics. In parallel, SOI-based photonics has invaded intra-Data-Center transmission systems with transceiver devices that can support high-speeds featuring low power consumption and cost. Nevertheless, the fabrication of Si3N4 transmitters for intra-Data-Center communication systems, providing elevated characteristics in comparison with Si, would require the co-integration of Si3N4 passive waveguides with active optical elements such as modulators, lasers, and amplifiers based on III-V materials and the ferroelectric barium titanate oxide material BaTiO3 (BTO). This PhD Thesis deals with the simulation and design of photonic integrated devices and circuits on the Si3N4 platform, towards its co-integration with active devices, for intra-Data-Center optical interconnect applications. Initially, the Thesis presents the analysis and design of an optical coupling configuration for efficient light transfer from an InP-based Quantum Dot (QD) laser to a Si3N4 waveguide. The demonstrated structures are ideal for the monolithic co-integration of lasers and passive waveguides on the same chip. The optimum device is based on a tri-layer Si-rich nitride intermediate waveguide, exhibiting coupling losses near 1dB and back-reflections below -52.6dB. Then, efficient light coupling between Si3N4 waveguides and heterogeneously integrated plasmonic BTO phase-shifters utilizing CMOS-compatible materials such as Copper (Cu) is thoroughly analyzed and simulated. The two plasmonic waveguides under study that perform the phase modulation are based on a Hybrid Plasmonic Waveguide (HPW) and a Plasmonic Slot Waveguide (MIM). Extensive simulations revealed that the optimum structure utilizes the MIM waveguide, achieving propagation losses of 0.78dB/μm, a confinement factor of 56.18%, and coupling losses below 1.29dB per interface. Finally, with the employment of MIM phase shifters, the design analysis of plasmo-photonic Mach-Zehnder in Ring (MZIR) modulators based on noble metals, gold (Au) and silver (Ag), and CMOS-compatible metals, Copper (Cu) is demonstrated. The modulators exhibit a reduction to the required voltage in comparison with traditional Mach-Zehnder Interferometers, close to 46% for Ag, 39% for Au, and 30% for the Cu-based MZIR. The devices can deliver 112Gbaud PAM-4 signals with only 2x1.3Vpp driving voltage retaining signal Q-Factors above 5. The whole work enables the realization of a Si3N4 high speed transmitter as an alternative low-cost solution to legacy SOI-based solutions for co-packaged optics.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Chatzitheocharis, Dimitrios
- Χατζηθεοχάρης, Δημήτριος
Subjects
dc:subject × 14Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56046