Back to search

Aristotle University Of Thessaloniki (AUTH)

Accurate measurement of the thermal conductivity of phase changing materials (PCM) in the solid and liquid phase

Abstract

dc:description

The aim of this dissertation was to propose new, easy to find in high purity and inexpensive solid reference materials for the thermal conductivity. Moreover, it was attempted for the first time to perform very low-uncertainty thermal-conductivity measurements using the Transient Hot-Wire Technique, without the influence of contact resistance, by employing a new category of materials known as Phase Changing Materials (PCMs). In the following chapters, the motivation for this work, the selected technique and materials, and the experimental setup and procedure are outlined. Moreover, the challenges faced, the results achieved, and the future-work propositions are discussed. Analytically: In Chapter 1, the importance of measurement standards is pointed out, and the lack of solid thermal-conductivity reference materials is addressed. It is argued that although there is an adequate number of thermal-conductivity reference fluids, the same is not true for solid materials. On the contrary, very few solids have been measured with low uncertainty and over a wide range of temperatures, while the measurements that do exist are usually associated with rather high uncertainties. Subsequently, a brief mention of the available methods for measuring the thermal-conductivity is made, and the Transient Hot-Wire (THW) technique is selected, as it is a well-established absolute method, backed by a full theory, which has already been giving excellent results in low-uncertainty measurements of the thermal conductivity of fluids. In the next chapter, the THW method is presented in detail, and the discussion is focused on the constraints on its validity and the conditions that are necessary to ensure low uncertainty in the measurements. Specifically, it is shown that accurate measurements of the thermal conductivity with the THW technique require a) the employment of two wires, b) each wire to have a diameter less than 25 μm, c) a temperature rise of less than 4 K, and d) insulated wires in case the measured material is electrically-conducting or polar. Chapter 3 presents the main idea behind this work, which was to avoid the issue of contact resistance in the measurement of the thermal conductivity of solids by immersing the hot wires directly into the sample, while the latter is at its melted state. In this way, the sample’s thermal conductivity can be attained directly either from theory or a numerical solution based on finite elements. Subsequently, the challenge of finding materials that are suitable for this idea, and simultaneously appropriate to be proposed as reference materials is discussed, and it is shown that after a series of unsuccessful trials with other compounds, the materials finally chosen for this work were 6 PCMs: 1-hexadecanol, 1-octadecanol, n-docosane, n-tetracosane, 1,6-hexanediol, and 1,8-octanediol. These popular energy-storage materials are a) relatively easy to melt and re-solidify due to their low melting temperatures, b) able to retain homogeneity and stability after phase-transitioning, c) amorphous, d) available in adequate quantities, high purities and a relatively low cost, and e) safe for humans and the environment. However, despite their many advantages and applications, there are very limited low-uncertainty data for their thermal conductivity, thus making the need for both solid-state and liquid-state measurements evident. The chapter continues with an analysis of the new instruments constructed for performing the measurements in both phases and the experimental methodology followed to attain the final thermal conductivity values. Subsequently, the discussion is extended to the validation of the technique, which was performed with measurements of toluene, a common reference liquid, whose thermal conductivity is known to 0.6 %. It is shown that the experimental value deviated by 0.1 % from the corresponding reference value at the same temperature. Additionally, a Finite Element Method (FEM) analysis to model the full geometry of the wire in the solid is presented, revealing that there is full agreement with the experiment over a time range of three orders of magnitude. Finally, performing a full G.U.M. analysis ensures that the overall uncertainty of the technique made up from both the experiment and the FEM is no more than 1%.In Chapter 4, the new low-uncertainty thermal-conductivity measurements of the selected PCMs covering a wide range of temperatures in both the solid and liquid phases are presented and discussed. At the 95 % confidence level, the combined uncertainty of the measurements in the solid and liquid phases are 0.6 % and 0.2 % for 1-hexadecanol, 0.5 % and 0.3 % for 1-octadecanol, 0.4 % and 0.6 % for n-docosane, 0.6 % and 0.3 % for n-tetracosane, 0.7 % and 0.4 % for 1,6-hexanediol, and 1.1 % and 0.5 % for 1,8-octanediol. Moreover, for each one of the PCMs a literature review of the available thermal-conductivity data is presented, and the measurements of other investigators are compared to the values predicted by the fitted equations of the present work. Subsequently, the monitoring of the hot wires’ resistances as a means of checking the proper operation of the sensors, and the effect of the cooling process on the homogeneity of the solid samples are demonstrated. Finally, the present thesis concludes with proposing the 6 PCMs as solid standards for the thermal conductivity, and suggesting that the work be extended to other PCMs as well, in order to facilitate their application in energy storage, as well as further limit the gap in solid thermal-conductivity reference materials.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Velliadou, Danai
  • Βελλιάδου, Δανάη

Subjects

dc:subject × 15

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/56051

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Velliadou, Danai; Βελλιάδου, Δανάη. Accurate measurement of the thermal conductivity of phase changing materials (PCM) in the solid and liquid phase. Aristotle University Of Thessaloniki (AUTH), 2024. http://hdl.handle.net/10442/hedi/56051