Institutes outside Greece
A methodology for generation capacity and network reinforcement planning
Abstract
dc:descriptionThis thesis presents a novel methodology for generation expansion planning. The method is based on Optimal Power Flow (OPF), a common tool for the economic operation of power systems. New generation capacity is simulated by means of virtual generators located at the candidate connection points, so OPF is used to plan generation expansion with respect to operating constraints of the existing network. Further research examined the bounds set on generation penetration by the specification of existing switchgear equipment, specifically switchgear and the contribution of additional generation to fault levels. Initially, the new constraints were considered in a three-step iterative generation allocation process. In each iteration, potential generators are gradually downsized from their original OPF allocation, which ignores expected fault currents, in proportion to their contribution to violations of switchgear equipment specifications. The process iterates until both system and fault constraints are satisfied. However, the iterative nature of the above approach cannot guarantee optimality for the final solution. Therefore, a new method had to be developed for the direct incorporation of switchgear constraints in generation expansion. The modelling of new capacity with virtual generators gives access to power flow control variables. Binding constraints for generation expansion can be expressed as constrained functions of those variables. Accordingly, expected fault currents were expressed as functions of OPF variables and switchgear equipment specification were converted to constraints for these functions. Thereafter, the allocation of new capacity by the OPF directly respects both system and fault constraints. The iterative approach has been proven less efficient than the later approach, but still maintains some advantages should the method be commercially exploited. Generator voltage control policies can also be converted to OPF constraints. The functionality of the suggested generation capacity allocation method was expanded to operate as an assessment tool of their impact on the amount of new capacity that a network can absorb. The method was expanded further, so as to consider the impact of capacity allocation on transmission losses. With a minor reformulation of the original method a new tool was designed for the optimal sitting of reactive power compensation banks for the improvement of network headroom. Finally, a network planning method is presented based on the LaGrange multipliers, sensitivity by-products of the OPF solution method, which connect network constraints with generation expansion. Generation expansion is planned simultaneously with network reinforcement, so the overall optimum is achieved. The main conclusion of this work is that OPF can be used as a powerful planning, as well as operating tool. Its flexible formulation allows the incorporation of emerging constraints in generation and network expansion, such as those imposed by switchgear.
Degree
thesis:*- Grantor dc:publisher
- Institutes outside Greece
- Year dc:date
- 2005
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Vovos, Panagis
- Βοβός, Παναγής
Subjects
dc:subject × 21- Κατανομή
- Θέσεις εγκατάστασης νέας ισχύος
- Εγκατεστημένη ισχύς
- Συναρτήσεις κόστους παραγωγής
- Βέλτιστη ροή ισχύος
- Σημεία εξαγωγής
- Σημεία εισαγωγής
- Διείσδυση ανανεώσιμων πηγών ενέργειας
- Allocation
- Capacity expansion locations
- Generation capacity
- Optimal power flow
- Import points
- Export points
- Renewable energy sources penetration
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Ηλεκτρική και Ηλεκτρονική μηχανική
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Electrical and Electronic Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56079