Back to search

University of West Attica

Ανάπτυξη αλγορίθμων σε PCL για Fail-Safe συστήματα

Abstract

dc:description

Increasing requirements in production automation make control systems more complex and vulnerable to failures. Failures can cause delays in production, property damage and, above all, accidents at work. For this reason, Directives and Legislation have been created at country, European Union and global level to define the essential safety requirements for industrial equipment. These Directives that must be followed by those involved in the design, supply, purchase or use of industrial equipment in the European Union and in several countries outside the European Union. For this reason, specific guidelines (CAT, SIL) have been created that must be followed to ensure safe operation in case of failure of any hardware or software component. For a reliable operation of a Fail Safety system together with a system operating at SIL2 or SIL3, the Hardware and Software must be Safetty type. Industrial equipment manufacturers incorporate safety features into a variety of devices. Depending on the Safety Integrity Level (SIL) requirements, these features can be used during the design phase to increase safety in the event of failures or malfunctions. With proper design, the process as well as its environment (including people) can be protected by entering a controlled safe state. Manufacturers have approached this problem in several ways, including adding redundant Central Processing Units (CPUs), using special hardware to interface input and output signals, and developing safety network protocols for the safe communication across devices. Unfortunately, these features cannot be added to existing machines, at least not without upgrading some hardware. As the associated costs lead to slower adoption, manufacturers rely on previous work to support certain security features, in particular CPU debugging. This is implemented in the form of low-level (logic gateway) software libraries designed to run on older hardware (PLCs) so that they can provide an increased level of security. This thesis discusses the required guidelines and legislation that must be followed to ensure the safe operation of a production plant. It describes the safety of operation that Basic and Specialized systems with PLCs have to ensure the safety of an automation system. It further presents developed algorithms that record behavioral measurements of electronic equipment, analyze the measurements and evaluate whether the basic equipment could be used in these systems to ensure Safety operation at the same time. The objective is simply to demonstrate that if there is a different approach to implement automation with Basic PLC equipment already installed in production processes, the safety aspects can be improved. Most importantly it is demonstrated that Safety Failure Functions can be implemented in existing automation systems, at low cost in terms of time and money.

Degree

thesis:*
Grantor dc:publisher
University of West Attica
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Theoxaris, Eustathios
  • Θεοχάρης, Ευστάθιος

Subjects

dc:subject × 9

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/56138

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Theoxaris, Eustathios; Θεοχάρης, Ευστάθιος. Ανάπτυξη αλγορίθμων σε PCL για Fail-Safe συστήματα. University of West Attica, 2024. http://hdl.handle.net/10442/hedi/56138