University of Ioannina
Ανάπτυξη υβριδικών καταλυτικών συστημάτων Fe και Ru για παραγωγή H2 από μυρμηκικό οξύ
Abstract
dc:descriptionThe development of appropriate technology for the production of H2 as an alternative fuel to fossil fuels is an important goal of the scientific community due to the gradual reduction of fossil reserves and the pollution they cause. Interest is mainly focused on finding sources of H2 production in large quantities, under mild temperature and pressure conditions, and on developing cheap and efficient production systems. In this context, one of the most suitable sources of H2 is considered to be HCOOH, through its decomposition by molecular catalysts. The commercial viability of H2 production catalysts depends on their ability to undergo repeated cycles of use, storage, and reuse under ambient conditions. In this PhD thesis, specifically in Chapter 3, the concept of Use-Store-Reuse (USR) applied to a catalyst (Ru-phosphine) in a two-phase catalytic system for H2 production via HCOOH dehydrogenation is introduced. The catalytic system, which utilizes Ru/P(CH2CH2PPh2)3 (Ru/PP3) in a triglyme/water solvent with KOH, demonstrates remarkable stability and efficiency over multiple cycles for a period of one month, including storage and reuse under ambient conditions. With a one-week USR cycle followed by three weeks of storage and reuse, the catalytic system achieves TONs exceeding 90.000 and TOFs exceeding 4.000 h-1. This study presents the first case of a USR approach using a stable Ru catalyst that operates without oxygen or light protection while maintaining its catalytic performance. The following chapter (Chapter 4) presents a study on the solution potential (Eh) of an efficient catalytic system developed for H2 production via the catalytic decomposition of HCOOH. The system, introduced in the literature as a 'double ligand', includes Ru or Fe, a phosphine (1st substituent), a Schiff base (2nd substituent), and an amino additive, resulting in gas production rates >100 ml/min. Through this study, the solution potential (Eh) throughout the entire catalytic process was fully mapped, and the contribution of all involved parameters, such as solvents and reactants, to the formation of Eh, as well as the role of the additive, was clarified. Utilizing the above knowledge, a new Ru catalytic system was developed that is highly active without the use of an additive, simply by modulating Eh in-situ. This system, with the addition of NaBH4 in a [Ru]:[NaBH4] ratio of 1:2, provides TONs=2.629, completely cleaving HCOOH. Furthermore, with the help of NMR spectroscopy, the formation of the hydride-intermediate [Ru-H] was detected in catalytic processes, both in the presence and absence of an additive, after the addition of NaBH4. The formation of Ru-H is a key step in the catalytic mechanism and a determinant of the catalyst's activity. In Chapter 5, an attempt was made to create a polymeric phosphine matrix (knitting aryl polymers) with the purpose of incorporating phosphorus, nitrogen, and/or oxygen atoms into it. With the introduction of a metal (Ru or Fe), the matrix can catalyze the decomposition of HCOOH towards the production of H2. The modification of the phosphine matrix involved various synthesis methods, including the replacement of benzene, the main molecule of the polymer, with other aromatics such as furan, pyridine, or even the creation of a polymer containing both; however with moderate success in catalysis. In Chapter 6, we discuss the use of two different PNP ligands, iProPNP and tBuPNP, in both homogeneous and heterogeneous catalysis of HCOOH dehydrogenation. Fe catalysts are produced in-situ ([Fe/iProPNP/PP3] and [Fe/tBuPNP/PP3]), both of which are directly active in catalysis without the need for additives or complexation with hydrides and/or CO groups. Immobilization of iProPNP and tBuPNP on the SiO2 surface leads to the materials SiO2@iProPNP and SiO2@tBuPNP, which form in situ heterogeneous catalysts by complexing with Fe and PP3. Using in situ ATR and UV-Vis spectroscopy, the formation of the active catalysts was confirmed with the participation of all components present in the catalysis. Comparative analysis reveals that [Fe/SiO2@iProPNP/PP3] exhibits lower activation energy compared to its homogeneous counterpart. The [Fe/SiO2@iProPNP/PP3] demonstrates remarkable recyclability, with three consecutive uses, highlighting its potential for sustainable catalytic applications, providing TONs=74.451 for the three uses in total. In the case of Ru as a metal, in-situ introduction of hydrides into the systems for both PNPs in homogeneous and heterogeneous catalysis was performed, enhancing their performance compared to the systems without hydride addition. The findings contribute valuable information on the performance and recyclability of PNP ligands in formic acid dehydrogenation, with implications for the development of efficient and reusable catalytic systems.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Theodorakopoulos, Marinos
- Θεοδωρακόπουλος, Μαρίνος
Subjects
dc:subject × 8Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56166