Back to search

Aristotle University Of Thessaloniki (AUTH)

Integrated engine and aftertreatment modeling for transient emissions prediction

Abstract

dc:description

The need to achieve high fuel efficiency while substantially reducing tailpipe emissions has driven the development of more advanced engine and after-treatment systems, increasing complexity. This advancement encompasses both hardware and software components, underscoring the pivotal role of the control strategies and the interaction among the various systems of a powertrain in meeting the demanding targets set by legislation. In the frame of this work, the development of an integrated engine and after-treatment simulation approach for the prediction of transient emissions is discussed. These simulations are not only instrumental in examining how diverse operating conditions and after-treatment setups influence emissions performance but also in formulating strategies to enhance emissions control systems. At its core, this research seeks to foster a deeper comprehension of the complex interactions between the engine and after-treatment systems, thereby facilitating the development of more efficient emissions control technologies for upcoming vehicles. Initially, in chapter 1 an introduction is given in order to introduce the reader to the operating principles and recent advancements of both internal combustion engines and exhaust after-treatment systems. The current and future legislation limits is presented, while the thesis objective and structure are discussed. In chapter 2 the impact of various engine-based thermal management measures on engine-out NOX, EAS inlet enthalpy and fuel consumption is evaluated under transient, cold-start conditions with the use of a detailed, validated 1D engine model. The development of a 3L Compression Ignition (CI) internal combustion engine model using GT-suite® software is described, together with its validation procedure which is based on dedicated experimental measurements. Chapter 3 investigates the way that different calibration parameters can influence exhaust gas enthalpy to accelerate after-treatment system warm-up as well as their impact on engine-out emissions and fuel economy during the first part of a cold-start driving cycle. Both experimental and model based results are presented, while the development and validation of a model for a 2L Spark Ignition (SI) internal combustion engine using gasdyn® software is described. Chapter 4 introduces a model-based evaluation of two EU6 after-treatment systems for both CI and SI engines, but also discusses the potential of alternative configurations which integrate close-coupled catalytic converters, advance materials and active exhaust heating, towards the stringent upcoming legislations. Both baseline models undergo validation through dedicated experimental protocols, while after-treatment modeling is achieved via Exothermia suite®, whose fundamental equations for mass-momentum, energy and species balance are presented. Chapter 5 focuses on the methodology of coupling ICE and EAS models following the FMI® protocol. This approach allows for the integrated simulation of various components from different software, hosted on a common platform. Online communication among these components is ensured, facilitating the evaluation of complete systems across a wide range of applications. The chapter also delves into the generation of reduced-order models, aiming to significantly reduce computational time while maintaining the predictive nature and accuracy of the simulated results. Chapter 6 centers on a model-based investigation of fuel efficient EU7 technologies. A warm-up calibration mode optimization methodology that encompasses multiple thermal management technologies is discussed, while different advanced EAS configurations are evaluated through an integrated engine and after-treatment simulation approach based on validated models. In chapter 7, the main target is to assess the potential of different powertrain and EAS configurations in meeting future legislation limits, via the development of a comprehensive Plug-in Hybrid Electric Vehicle (PHEV) model equipped with a SI engine. The efficiency of both the engine and the EAS are evaluated under diverse boundary and initial conditions, such as varying lambda control strategies, simulation protocols and ambient temperatures.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Tziolas, Vasileios
  • Τζιόλας, Βασίλειος

Subjects

dc:subject × 26

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/56250

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Tziolas, Vasileios; Τζιόλας, Βασίλειος. Integrated engine and aftertreatment modeling for transient emissions prediction. Aristotle University Of Thessaloniki (AUTH), 2024. http://hdl.handle.net/10442/hedi/56250