University of Patras
Μεθοδολογία διαχείρισης ποιότητας τεχνικών έργων σκυροδέματος σε ακραία περιβάλλοντα
Abstract
dc:descriptionIn this PhD thesis, options about managing the quality of constructions that mainly concern civil engineering projects based on concrete were studied. The primary focus was mostly on the characteristics of concrete and how these can be improved by the addition of contemporary nano-materials, as well as on the management of concrete pouring in the implementation phase of construction in order to ensure the quality of concrete both short term as well as long term throughout the life cycle of the project. In particular, and with regard to the initial phase, the aiming is focused in preventing of small-scale failures, e.g. surface cracks, profound or deep cracks may lead to possible demolition and re-concreting, whilst long term and in relation to the required initial maintenance (within a predefined interval), ensuring the achievement of the maximum possible strength in addition to quality and durability of the construction. The result of the research contributed to establishment of original material given that the maturity curves of a wide used type of concrete produced in Greece were developed, concretes with additional nano-materials were studied and designed, developed and tested exclusively in Greece, while a model was studied and developed for the first time that controls and suggests the optimal start day of a concreting while also incorporating a model to calculate the moisture evaporation rate (EVR) over the concrete surface. The methodology followed to conduct the research and with regard to the primary data, is basically experimental. Initially, an extensive literature review was carried out in order to gain an in-depth understanding of the maturity method. Then, the type of nano-material to be added to the most widely used concrete – C25/30, Interbeton) in Greece was sought and determined, with the ultimate goal of improving its mechanical properties. Then, a number of experiments were organized on cement mortar samples at the premises of the TITAN A.E. Cement Factory (www.titan.gr) in Drepano, Patras, as well as on concrete samples at the facilities of the Quality Control Laboratory of the concrete factory of INTERBETON A.E. (www.interbeton.gr) in Drepano Patras too. The experiments on cement mortars exceeded 380 tests, while on concrete the tests were over 500. The purpose of the experiments initially was to develop the maturity curves both for the "control" concrete mix, i.e. the standard C25/30, and for the one obtained after incorporating the additional nano-material - which in this particular research was nano-silica (nano-SiO2) - and then comparing and contrasting the results. The nano-silica (nano-SiO2 or nS) used was produced and prepared for integration into both cement mortar and concrete samples at the Plasma Laboratory of the Chemical Engineering Department of the University of Patras. Simultaneously and parallel to the experiments, a model was developed which calculates the moisture evaporation rate (EVR) over the concrete surface making it a advantageous and easy-to-use tool for the field engineer compared to the widely used nomogram of ACR 305 R which due to user subjectivity in its calculations, it is prone to errors and deviations. The EVR calculation model was then integrated into the final and broader model to analyze possible concreting start days. The range of possible days is seven (7) from the decision point based on which the model finally determines the optimum, considering independent parameters such as EVR and prevailing meteorological conditions. For the development of the model, a large amount of data (input data) was used - such as ambient temperature, concrete temperature, humidity, wind speed - over a period of two (2) years (2020 – 2021) from two different countries (Greece & Israel) which note a characteristically "adverse" combination of environmental conditions throughout the year and especially in the period from April to October where the majority of concreting takes place. The model was developed and completed through 3 phases, namely: development, validation & testing. Based on the results of the research, the maturity curves were successfully developed for the common (standard) C25/30 concrete as well as for the nano-reinforced, while from the analysis of the curves, a remarkable increase in the mechanical strength of the concrete in which the nano-reinforced was incorporated was recognized. silicon. Also, the final model for choosing the optimal concreting day was tested and verified.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papadimitropoulos, Vasileios
- Παπαδημητρόπουλος, Βασίλειος
Subjects
dc:subject × 11Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56293