University of Ioannina
Μελέτη της ομοιογένειας και της κρυστάλλωσης σε νέα δυαδικά μίγματα πολυεστέρων του 2,5-φουρανοδικαρβοξυλικού οξέος
Abstract
dc:descriptionPoly(alkylene 2,5-furandicarboxylates) (PAFs) are alipharomatic thermoplastic polyesters, which are considered the biobased competitors of poly(alkylene terephthalates) (PATs) and are expected to play a key role in bioeconomy. In the first part of this thesis, the isothermal and non-isothermal crystallization from the melt and glass of two PAFs, poly(butylene 2,5-furandicarboxylate) (PBF) and poly(hexamethylene 2,5-furandicarboxylate) (PHF), were studied in detail, at very slow and moderate cooling and heating rates via differential scanning calorimetry (DSC), as understanding melting and crystallization is crucial for the commercialization of PAFs. PBF crystallizes faster than the two best-known PAFs, poly(propylene 2,5-furandicarboxylate) (PPF) and poly(ethylene furandicarboxylate) (PEF), while PHF crystallizes faster than PBF . The multiple melting behavior was analyzed and the equilibrium melting temperature was determined through the linear Hoffman–Weeks method (Tm0 = 196.4°C for PBF, Tm0 = 179.2°C for PHF). The kinetics of isothermal crystallization were analyzed through the Avrami and Lauritzen – Hoffman equations, whilst for the kinetics of non-isothermal crystallization several theoretical models were implemented (Avrami, Ozawa, Mo, modified Lauritzen – Hoffman equation). The activation energy, ΔEx, of non-isothermal crystallization was determined using the Kissinger equation and two isoconversional methods, the Friedman differential method and the Flynn-Wall-Ozawa (FWO) integral method. ΔEx showed a dependency on the degree of conversion, X%, which is indication of a complex crystallization mechanism. Τhe FWO method yielded higher absolute values of the activation energy than the Friedman method, with the Kissinger method giving an intermediate value of the two. The effect of self-nucleation on crystallization from the melt was studied and, in each case, self-nucleation led to increased crystallization rates and a decrease in the ΔEx of crystallization. Finally, the dynamic crystallization of PHF from the melt and glass was studied by means of fast scanning calorimetry (FSC), which simulates the cooling/heating rates applied in industry. PHF does not have time to crystallize during cooling from the melt at rates above 1200°C/min. When heated from the glass, it does not crystallize for rates above 12000°C/min. FSC was also implemented to study the effect of heating rate on the melting of PHF after isothermal crystallization, where it became apparent that melting occurs immediately above the crystallization temperature, so the first multiple melting peak is the one corresponding to the melting of the primary crystals.In the second part of this thesis, the miscibility of binary blends of PBF with other, mainly furanic or terephthalate, polyesters was studied. First, a theoretical study of miscibility was conducted by calculating the solubility parameters, δ, through the Hoftyzer – van Krevelen group contribution method, as polymers with similar values of δ are expected to be miscible. Crystallization in the mixtures was mainly studied under dynamic conditions, by applying a range of cooling/heating rates. Τhe presence of a composition-dependent glass transition temperature (Tg), a limited tendency for crystallization and a decrease in the melting temperatures (Tm) with increasing content of the other blend component are indications of miscibility in the blends. Blends of PBF with PEF gave a partially miscible system, with two Tgs which shifted towards intermediate temperatures. The crystallization rates of PEF increased with increasing PBF content. PBF crystallizes more easily and PBF crystals promote the crystallization of PEF. This is an important finding, as the slow crystallization of PEF is a limiting factor for its applications and commercialization. The reactive blending process, applied in industrial extruders with the aim of compatibilization, was simulated in DSC pans in the case of PEF/PBF blends. A series of reactive blending experiments were performed by heating to different temperatures above the Tm of the two polymers and for different durations of time. At low melting temperatures, just above the Tm of PEF, prolonged times are required for the blends to be transformed into random copolymers, as inferred from the appearance of a single Tg. At higher reactive melting temperatures, compatibilization is achieved in shorter times and mixing is easier due to the reduced viscosity of the melt, but there is a significant reduction in the molecular weight of the polymers. Therefore, moderate melt mixing temperatures are optimal. Blends of PBF with PHF gave a rather miscible system, with a composition-dependent Tg. Crystallization of PBF upon cooling from the melt appeared to be facilitated by increasing PHF content, as demonstrated by its higher crystallization rates and lower ΔΕx of crystallization in the blends. In contrast, crystallization of PHF from the melt was hindered in the blends. The kinetics of non-isothermal crystallization in the blends were analyzed based on the Avrami equation, while the activation energy was calculated through the Friedman isoconversional method. Blends of PBF with PPF also gave a miscible system, with a composition-dependent Tg. Upon heating from the glass, it was mainly PBF that crystallized in the blends. Blends of PBF with poly(1,4-cyclohexanedimethylene 2,5-furandicarboxylate) (PCHDMF) also exhibited miscibility, with a composition-dependent Tg. Upon heating from the glass, it was mainly PCHDMF that crystallized in the blends. Blends of PBF with poly(ethylene terephthalate) (PET), the best-known terephthalate polyester, also gave a miscible system, with a composition-dependent Tg. Crystallization of PET upon heating from the glass appeared to be facilitated by increasing PBF content, as demonstrated by its higher crystallization rates and lower ΔΕx of crystallization in the blends. In contrast, crystallization of PET from the melt was hindered in the blends. Blends of PBF with poly(propylene terephthalate) (PPT) also gave a rather miscible system, with a composition-dependent Tg. Crystallization of PPT from the glass was hindered in the blends, as demonstrated by its lower crystallization rate and higher ΔΕx of crystallization in the blends. Accordingly, crystallization of PPT as well as PBF upon cooling from the melt became more difficult in the blends. Blends of PBF with poly(propylene terephthalate) (PBT) showed at least partial miscibility. Only the Tg of PBF appeared, however the Tg of PBT cannot be directly determined with precision because of the high crystallinity of the sample. Upon cooling from the melt, the crystallization rates of PBT decreased in the blends, so crystallization became more difficult with decreasing PBT content. In the case of PBT/PBF blends, reactive blending was implemented to increase miscibility. By increasing reactive blending time, crystallization was inhibited, which is an indication of miscibility. For longer reactive blending times, the Tg of PBT or a related copolymer also appears, so a significant part of PBT has been obtained in the amorphous state and partial miscibility has been achieved. Blends of PBF with poly(butylene naphthalate) (PBN) showed no miscibility, as did blends of PBF with poly(lactic acid). Blends of PBF with bisphenol-A poly(carbonate) (PC) were also immiscible. By means of wide-angle X-ray diffraction (WAXD) it was shown that in each case a mixture of crystals of the components and not crystals of the mixture were formed in the blends, while the degree of crystallinity was lower in intermediate compositions. In each series of blends, Tg presented a wide temperature range in intermediate compositions, so there was a tendency for separation. To predict the variation of Tg with composition in miscible blends, the Fox and Gordon – Taylor equations were applied and in most cases of blends a negative variation from linearity was exhibited by the experimental values of Tg, so the interactions between the components were rather weak.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Poulopoulou, Niki
- Πουλοπούλου, Νίκη
Subjects
dc:subject × 27- Βιοβασιζόμενα πολυμερή
- Πολυμερή από ανανεώσιμους πόρους
- Πολυμερικά μίγματα
- Δραστική ανάμιξη
- Πολυ(2,5-φουρανοδικαρβοξυλικός 1,4-βουτυλενεστέρας)
- Πολυεστέρες
- 2,5-φουρανοδικαρβοξυλικό οξύ
- Πολυμερή, Αναμιξιμότητα
- Κρυστάλλωση
- Κινητική κρυστάλλωσης
- FDCA
- Polymers from renewable resources, DSC, FSC
- Polyesters
- Poly(butylene 2,5-furandicarboxylate) (PBF)
- Polymer blends
- Miscibility of polymers
- Crystallization kinetics
- Crystallization
- Reactive blending
- Differential scanning calorimetry (DSC)
- Fast scanning calorimetry (FSC)
- Χημεία
- Φυσικές Επιστήμες
- Επιστήμη πολυμερών
- Chemical Sciences
- Natural Sciences
- Polymer Science
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56374