Aristotle University Of Thessaloniki (AUTH)
Ανάπτυξη τεχνολογίας για ραδιολογικό χαρακτηρισμό καταλοίπων με εμπλουτισμό σε φυσικά ραδιονουκλίδια (NORM waste) που προέρχονται από βιομηχανίες πετρελαίου
Abstract
dc:descriptionThe aim of this Doctoral Thesis is the development of an in-situ, non-destructive, quick, sensitive and cost-effective method for the radiological characterization of spent Oil Based Mud (OBM). The method was mainly developed for the radiological characterization of the spent amount of OBM that exists in Greece, originating from Oil Industry. The in-situ method development was based on the combination of the Monte Carlo simulation code MCNP-X and gamma spectrometry measurements by using a 1.5x1.5 in. LaBr3(Ce) scintillation detector. Three types of containers for OBM packaging were simulated as volume sources: Metallic Drum, Flexible Intermediate Bulk Container – FIBC, Intermediate Bulk Container – IBC, of known radioactivity and material density. In the method development, OBM material density and NORM radionuclides activity concentrations were considered homogeneously distributed. Additionally, the method was developed with the provisions of application to an OBM material density range and application to TENORM waste from Oil Industry of high activity concentrations (sludge, scales), up to 15 kBq/g. In this context, the laboratory experimental calibration of the LaBr3(Ce) scintillation detector (energy and Full Width Half Maximum) and its crystal active volume evaluation were conducted, by using reference calibration sources and the simulation code MCNP-X. Afterwards, the in-situ gamma spectrometry system was designed and constructed in NCSR “DEMOKRITOS”. In the MCNP-X simulations for the in-situ method development, the following were included: Full Energy Peak Efficiencies (FEPE) curves for OBM density 1.0 g/cm3, collimator and density effects on FEPE efficiency curves and true coincidence summing checking for the measurement configurations that were used. Subsequently, gamma spectrometry measurements were performed in the field, where, except for the experimental validation of the MCNP-X models that were developed, Minimum Detectable Activities (MDA) for the used radionuclides and correction factors for 226Ra were calculated for its concentration determination from its daughter nuclides. By this in-situ, non-destructive method application, initially, OBM containers are segregated to candidates for clearance and no candidates for clearance by a dose rate measurement in the container surface. Then, OBM containers that are candidates for clearance are examined whether they can be cleared or not, by very quick gamma spectrometry measurements. In case OBM containers cannot be cleared, a gamma spectrometry measurement of 15 min is adequate to provide a full radiological characterization. The spent OBM that can be radiologically characterized through this procedure ranges from 0.25 m3 (Metallic Drum) to 1 m3 (FIBC, IBC).The use of a small size scintillator LaBr3(Ce) 1.5x1.5 in., which is relatively low cost, without the need of taking samples for analyses, makes this method cost-effective and flexible at its application. Some of the significant advantages of the method are that it can applied irrespective of the spent OBM production time and at TENORM waste originating from Oil industries of high radioactivity levels (sludge, scales).
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Ntalla, Eleni
- Ντάλλα, Ελένη
Subjects
dc:subject × 14Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56391