Aristotle University Of Thessaloniki (AUTH)
Προσδιορισμός της θέσης αντικειμένων μέσω τεχνολογίας "αναγνώρισης μέσω ραδιοσυχνοτήτων"
Abstract
dc:descriptionThis PhD thesis addresses the problem of determining the location of objects using RFID (Radio Frequency Identification) technology. RFID technology makes it possible for an RFID reader to communicate with RFID tags that are within its range. The tags do not have an independent power supply system, but respond to the reader by backscattering the power it emits. This makes RFID technology attractive in supply chain, inventory and warehouse management applications. From the backscattered wave received by the reader's receiver we can obtain information about the phase of the electromagnetic wave. In this thesis, three original tracking methods that utilize RFID technology are presented. The first examines the detection of moving tags from a fixed antenna installation. Antennas are placed at known locations which an RFID reader uses to communicate with tags in the environment. Phase measurements are collected and undergo the process of unwrapping, a technique that succeeds in part to remove the ambiguity of the measured phase. Possible trajectories for the movement of the tags in space are extracted and then evaluated to finally select the one that best reflects the actual one. In the second proposed method, a prototype portable measuring device consisting of an RFID reader, an IMU and a microcomputer is utilized. The device is carried by a user seeking to be guided towards and locate a stationary RFID tag. The user is asked to perform different movements with the device, during which phase and angular rotation measurements are collected. Successive measurements are combined through an iterative particle filter algorithm. At the end of each iteration of the algorithm, the user is provided with an estimate of the direction and distance at which the tag is located. In the third proposed method, the prototype device is again used, replacing the IMU with a camera. The method focuses on the inventoring and detection of stationary RFID tags. Reference points are placed at known locations, each of which consists of an optical marker and an RFID tag. The user moves the device in space and the RFID reader collects phase measurements from the ambient tags (at unknown or unidentified locations). At the same time, the camera collects frames in which it has detected at least one of the optical markers. The position of the device is estimated from the measurement data obtained from the reference points. Then, the estimated trajectory and unfolded phase measurements from the tags at the unknown locations are exploited to calculate these positions. The main criterion for evaluating all methods is the accuracy of detection. For all three methods presented, the maximum error does not exceed one metre. However, great weight is also given to the computational requirements of the methods, since it is desired that they be applicable in real time. All three methods are supported and confirmed by experimental results.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Raptopoulos-Chatzistefanou, Aristeidis
- Ραπτόπουλος-Χατζηστεφάνου, Αριστείδης
Subjects
dc:subject × 20- Εντοπισμός
- Αναγνώριση μέσω ραδιοσυχνοτήτων
- Φάση ηλεκτρομαγνητικού κύματος
- Ανίχνευση
- Αδρανειακή μονάδα μέτρησης
- Οπτικός δείκτης
- Φορητή συσκευή
- Localization
- RFID
- Phase of electromagnetic wave
- Tracking
- Inertial measurement unit
- Optical marker
- Mobile device
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική και συστήματα επικοινωνιών, Τηλεπικοινωνίες
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Communication engineering and systems, Telecommunications
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56395