National Technical University of Athens (NTUA)
Ανάπτυξη νέων υβριδικών (ανόργανων-οργανικών) ημιαγώγιμων συστημάτων
Abstract
dc:descriptionSubject of the present doctoral thesis is the development, i.e., the original design, synthesis and detailed characterization, of new hybrid (inorganic - organic) semiconductive systems, based on metal chalcogenides and selected organic compounds. Particular emphasis is placed on the study of the photoelectrochemical behavior of the obtained products and the assessment of their photo-conversion efficiency, due to their application prospects in solar cells and optoelectronics, in general. More specifically, the inorganic part of the synthesized hybrid semiconductors constitute polycrystalline thin films of the general ZnxCd1-xSeyTe1-y (0≤x≤1 and 0≤y<1) form, which are developed on titanium substrates via cathodic electrodeposition of the corresponding precursor electro-active species Cd(II), Zn(II), Te(IV), and Se(IV) from high temperature acidic aqueous solutions, under potentiostatic conditions. Regarding the organic part, compounds of two different classes are utilized: the metallocenes ferrocene (Fc), chromocene (Cc) and nickelocene (Nc) and the natural/semi-synthetic products chlorophyll α (Chlα), chlorophyll β (Chlβ), β-carotene (Crt), anthocyanins (ANCs) and sodium copper chlorophyllin (CCN), which are extracted from common vegetable raw materials (spinach, red cabbage) for the purposes of this study -with the exception of CCN that is of commercial origin-. For the formation of the hybrid systems, two methods are used and compared: electro-codeposition (ECD), during which the desired species are incorporated simultaneously into a single-layered (SL) film (one-step method), and multilayer deposition (MLD) that results in double-layered (DL) or three-layered/"sandwich" type (SDW) structures through consecutive steps (multistep method) of electrochemical synthesis (inorganic part) and spin coating (organic part).All the developed semiconductive systems, both inorganic and hybrid, are fully characterized in terms of their microstructure through X-ray Diffraction (XRD) analysis, so conclusions are drawn regarding the adopted crystal structure and orientation and important parameters are calculated, such as apparent average crystallite size, interplanar spacing etc. Also, observation of the samples in a suitably equipped Scanning Electron Microscope (SEM) provides information about their surface morphology and elemental composition via Energy Dispersive X-ray Analysis (EDAX). The energy band gap (Eg) of the synthesized semiconductors is estimated according to Diffuse Reflectance Spectroscopy (DRS) data by graphical processing of both the obtained spectra (%Reflectance vs. λ), directly, and the corresponding modified Tauc plots derived from the application of Kubelka-Munk theory ([F(R)∙hν]2 vs. hv). Finally, all semiconductive systems are studied as static photo-active working electrodes of a photoelectrochemical cell (PEC) in contact with sodium polysulfide solution (S2-/Sx2-, SPS) under dark conditions, as well as under constant illumination of one "full" sun (1000 W∙m−2), at which point anodic photocurrent is observed, indicating n-type conductivity. From the obtained characteristic J-V polarization curves, the electronic parameters of short-circuit current density (JSC), open-circuit voltage (VOC), photoelectrochemical efficiency (η) and filling factor (FF) are calculated and qualitative conclusions are drawn. The dissertation is divided into four main Sections (I to IV). Sections I and II deal with the study of inorganic and hybrid semiconductors, respectively, and both include a corresponding theoretical and experimental part. In more detail, Chapters I.1 and I.2, introduce key concepts related to the scientific field of semiconductors and photovoltaic technology, provide information and data regarding the binary and mixed chalcogenides studied in the context of this work and describe the synthesis and characterization techniques utilized. In Chapter I.3 (experimental part of Section I) the electrosynthesis of thin films of the binary semiconductors CdSe and ZnSe, as well as the substitution systems ZnxCd1-xSe (ZnCdSe) και ZnxCd1-xTeySe1-y (ZnCdTeSe), is described in detail and their properties are defined, in order to act as a reference system during the study of their analogous hybrid semiconductors. It is importuned to note that the bovementioned semiconductors of variable composition (ZnCdSe, ZnCdTeSe) are studied as reducedtoxicity alternative systems to the "conventional" semiconductor CdSe, which also provide the additional advantage of property tailoring by means of stoichiometry control (x,y). Reference to ZnSe electrodeposits is limited, due to their reduced photoresponse. Instead, emphasis is placed on the determination of the optimal deposition conditions for mixed semiconductors, as well as on the dependence of their properties and photo-electrochemical behavior on composition. The first chapter of Section II (II.1) provides a general introduction to hybrid systems, but also to the experimental techniques used for their synthesis in the present research. It is followed by the data received during the experimental study of hybrid (inorganic-organic) systems with metallocenes (Chapter II.2) and with natural/semi-synthetic dyes (Chapter II.3), including the methods applied for the extraction, separation, purification and identification of the natural products from their chosen sources. In practice, the successful synthesis of sufficiently stable and photoconductive hybrids is limited to the use of CdSe and ZnCdSe semiconductors as inorganic parts, due to inherent problems faced during the attempts to receive quaternary ZnCdTeSe hybrid systems (reviewed). Also, the optimal technique of integrating the organic part into the hybrid system (MLD vs. ECD), as well as the effect of each organic compound on the behavior of the whole, depend on its particular properties, are determined experimentally and examined on a case-by-case basis. The introduction of natural/semi-synthetic dyes as the organic part of hybrid systems is evaluated as particularly promising in order to obtain semiconductors with enhanced photoresponse. Based on the results received, particularly important is the successful synthesis of ZnCdSe three-layered structures with β-carotene (ZnCdSe-Crt-ZnCdSe) and chlorophyll α (ZnCdSe-Chlα-ZnCdSe), for which the increase in photo-conversion efficiency is greater than +200% and +460%, respectively, in comparison to the inorganic films. Also very positive are the data obtained from the synthesis of ZnCdSe co-deposits with anthocyanins (ZnCdSe/ANCs) and sodium copper chlorophyllin (ZnCdSe/CCN), in which an increase in efficiency up to +225% and +185%, respectively, is achieved. Regarding the binary semiconductor, high efficiency is recorded in CdSe/CCN co-deposits (+445%) and in CdSe-Fc-CdSe SDW systems (+235%). It is important that optimal performance is achieved using natural/semi-synthetic compounds which are completely safe, non-toxic, biodegradable and environmentally friendly. In Section III, useful conclusions are summarized according to the total of the obtained results (Chapter III.1) and proposals are made for their utilization in the context of further research (Chapter III.2). Finally, Section IV (Appendices) is auxiliary and includes useful indexes, reference patterns and diagrams.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Mylonakou-Koufoudaki, Karmen
- Μυλωνάκου-Κουφουδάκη, Κάρμεν
Subjects
dc:subject × 43- Υβριδικοί ημιαγωγοί
- Ημιαγωγοί ΙΙ-VI
- Χαλκογενίδια
- Φωτοηλεκτροχημικά κελιά
- Λεπτά υμένια
- Καθοδική ηλεκτροαπόθεση
- Μεταλλοκένια
- Φυσικές χρωστικές
- Πολυστρωματικές δομές
- Ενεργειακό διάκενο
- Συναπόθεση
- Χαρακτηρισμός υλικών
- Aπόδοση φωτομετατροπής
- Φωτοβολταϊκή τεχνολογία
- Hybrid semiconductors
- II-VI semiconductors
- Chalcogenides
- Photoelectrochemical cells
- Thin films
- Cathodic electrodeposition
- Metallocenes
- Natural dyes
- Multi-layered structures
- Co-deposition
- Materials characterization
- Photoconversion efficiency
- Photovoltaic technology
- Χημεία
- Φυσικές Επιστήμες
- Ηλεκτροχημεία
- Οργανική χημεία
- Μηχανική Υλικών
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιφάνειες, Επικαλύψεις και Υμένες
- Επιστήμη υλικών, χαρακτηρισμός και δοκιμές
- Chemical Sciences
- Natural Sciences
- Electrochemistry
- Organic Chemistry
- Materials Engineering
- Engineering and Technology
- Surfaces, Coatings and Films
- Materials Science, Characterization and testing
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56434