Democritus University of Thrace (DUTH)
Μέθοδος βέλτιστης οδήγησης ηλεκτρονικών μετατροπέων ισχύος για τη διασφάλιση της ποιότητας ισχύος σε υβριδικά μικροδίκτυα
Abstract
dc:descriptionThe objective of this PhD dissertation is to develop optimal driving methods for power electronic devices, in order to enhance the power quality in hybrid microgrids. In particular, this PhD dissertation focuses on the study of hybrid microgrids under the perspective of harmonics and ripple compensation, as well as the development of optimal driving methods for the existing power converters of the DC subgrid, in order to effectively compensate the second-order voltage harmonics at its nodes, while exploring and resolving the issues arising from the use of multiple compensation circuits, and studying the cooperative control of the virtual impedance-based methods with the developed compensation methods. Initially, as regards the microgrid architectures, it was found that among the existing microgrid ones the most promising is the hybrid topology, as it allows the flexible organization of DC and AC loads and power sources, thereby effectively reducing the conversion stages and improving the overall performance of the microgrid. Regarding power quality enhancement in hybrid microgrids, it was found that the existing analyses of hybrid microgrids that address harmonic compensation in the DC subgrid are based on simplified approaches, which either ignore the line impedances or assume that the compensation units are either directly connected to or embedded in the harmonic source. Thus, the existing compensation methods present several technical issues, which make them unsuitable for distributed/remote harmonic compensation in hybrid microgrids. In particular, existing compensation methods require the modification of the host system, the addition of hardware, the use of costly real-time communication infrastructure and central controllers, and their effectiveness is highly dependent on the geographical location of the compensation units and the knowledge of various microgrid parameters that are not easily available. Moreover, in the case where multiple compensation circuits are utilized, they provoke circulating currents, while the harmonic current sharing is strongly influenced by the line impedances. Considering the abovementioned facts, the current state of microgrids was initially studied in depth in this PhD dissertation and specifically the elements that compose a microgrid installation, the basic topologies of microgrids, and the needs and issues arising from their operation. In the same direction, the current state of hybrid microgrids was also studied in detail, focusing on the main control methods of the two subgrids that concern load sharing, voltage control as well as asymmetry and harmonic compensation in both subgrids, while increased attention was given to the energy management of hybrid microgrids and the harmonic interaction of the two subgrids. In that direction, some significant conclusions were drawn on the role of hybrid microgrids in the evolution of power systems, as well as on the technical issues that need to be addressed for their further development and improvement. In this context, in this PhD dissertation the incorporation of optimal driving methods in the existing power electronic devices of hybrid microgrids is proposed, in order to enhance the power quality by compensating the second-order voltage harmonic component in the DC subgrid. The integration of compensation methods into existing power electronic devices without the need of adding additional communication infrastructure provides significant flexibility to the microgrid, as it allows its scalability and simplifies the installation and maintenance process, while reducing installation and operational costs. An important contribution of this PhD dissertation is also the analysis of the DC subgrid of hybrid microgrids under the prospect of second-order voltage harmonic compensation by power devices that are not directly connected to the DC bus. Based on this consideration, the analysis of the DC subgrid differs from the usual approaches used in the relevant literature in which the effect of the line impedances on the compensation effort is ignored. Therefore, a detailed mathematical analysis has been presented which highlights how the compensation methods work, the problems arising from their use and possible ways of overcoming these problems when the effect of the interconnection lines is not ignored. With the aid of this analysis it became clear that the development of an optimal compensation method that is not affected by the interconnection lines, while it can be easily integrated into existing equipment, is of utmost importance. In this context, an optimal method was developed that compensates the second-order voltage harmonic components at the critical nodes of the DC subgrid of hybrid microgrids. This method uses one compensation circuit, which is located remotely from the DC bus, while the compensation is achieved by means of a genetic algorithm, which has been developed and designed for this purpose. Following, an improved compensation method is developed, which through metaheuristic algorithms coordinates multiple power electronic devices to achieve the compensation of the second-order voltage harmonic component in the DC subgrid of hybrid microgrids, and thus avoiding the problems arising from the use of a single compensation circuit, such as single-point of failure and capacity issues. At the same time, the DC subgrid was analyzed from the perspective of coordinated compensation in order to highlight the problems arising from the use of multiple compensation circuits and the way in which compensation methods that rely on local variables work. Finally, the technical characteristics of the proposed method are compared (qualitatively and quantitatively) with other compensation methods that have been proposed in the relevant literature, thus highlighting the contribution of this PhD dissertation. Next, the cooperative control of the virtual impedance based methods with the developed method of coordinated compensation is investigated. From this investigation two new control strategies are developed, modeled and studied, which correct the operating points of compensation circuits that utilize virtual impedance-based methods. The main advantages of the proposed control strategies are that they achieve effective compensation independently of the interconnection lines, they eliminate the circulating currents caused by the virtual impedance-based methods, the harmonic currents are shared properly among the utilized units and the implementation of the strategies does not require any real-time communications nor any central controllers. The main difference between the two strategies lies in the fact that one is proposed exclusively for microgrids with dominant ohmic interconnection lines, while the other one is proposed mainly for microgrids with complex interconnection lines. Finally, the effectiveness of these two strategies is evaluated through simulation results. From these results, it is concluded that the proposed strategies contribute in reducing the negative effects and improving the effectiveness of virtual impedance-based methods. In conclusion, it is worth noting that the mathematical and theoretical analyses of this dissertation are confirmed through simulations and experimental results on laboratory prototypes, which have been constructed for this purpose.
Degree
thesis:*- Grantor dc:publisher
- Democritus University of Thrace (DUTH)
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Valsamas, Fotios
- Βαλσαμάς, Φώτιος
Subjects
dc:subject × 18- Μικροδίκτυα
- Μέθοδοι ενεργητικής απόζευξης ισχύος
- Μεταευρετικοί αλγόριθμοι
- Μετατροπείς ισχύος
- Διεσπαρμένα συστήματα
- Microgrids
- Active power decoupling methods
- Metaheuristic algorithms
- Power converters
- Distributed systems
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Επιστήμες Μηχανικού και Τεχνολογία
- Ηλεκτρική και Ηλεκτρονική μηχανική
- Αυτοματισμοί και Συστήματα ελέγχου
- Electrical Engineering, Electronic Engineering, Information Engineering
- Engineering and Technology
- Electrical and Electronic Engineering
- Automation and control systems
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56467