Technical University of Crete (TUC)
Τεκτονoστρωματογραφική χωρική (3D) προσομοίωση των σχηματισμών μεταλπικής ηλικίας της λεκάνης της Μεσσαράς, Κεντρική Κρήτη
Abstract
dc:descriptionThe modelling of the subsurface geology, both in two- or three-dimensional, is a task that depends on the quantity and quality of the available data, their validated spatial correlation, all of them being integrated under a geologically reasonable framework. In most cases, a reasonable framework can only be achieved with the use of many high-quality data, the integration of which generate complicated geological structures. Both the selection of data and their interpretation are inevitably subjective which can lead to different results among geologists. At this point, the use of modern three-dimensional modelling and simulation software helps significantly in minimizing the difference between the multiple results, since it is easier to identify incorrect input data, to evaluate the spatial correlations of the data and more especially to identify the areas that show a greater degree of uncertainty. The use of such methodologies has been increased over the past years due to the rapid development of computers science that can now manage large database and the visualization of three-dimensional geomorphologies even on normal desktops. This PhD thesis describes the use of 3D geomodelling methodologies in the Messara basin (Crete, Greece) with the construction of two 3D geological models in different scale and with different objectives. The first one concerns the construction of the 3D geometric model of the entire basin of Messara and the other concerns the construction of the 3D static geological model (geometric model and property-model) of the alluvial aquifer of Tymbakio (western part of Messara). The construction of the geometric model of Messara was mainly based on a network of eight 2D seismic reflection lines that cover the basin plain. The seismic data reveals the thickness of the postalpine sediments. The main conclusion is the existence of a hypocenter of 1500m depth (absolute) in the eastern part of the Messara basin. Given that the biogenic gas leakages have been reported in the past in the same area, the results of the 3D modelling are used in combination with geochemical analyses, stratigraphic correlations and the basin configuration to propose a possible scenario for the generation of the biogenic gas in the area. A new field work, sampling and laboratory analyses were carried out to estimate all the parameters of the biogenic gas generation (source / reservoir / trap). The study showed that the geochemical characteristics of the shale layers characterize the source rock as pour, which consequently makes the area of interest to have a low potential in gas generation. On the contrary, the high porosity and permeability of the sandstones, as well as, the vertical and lateral alternations with argillaceous layers provide the necessary trapping mechanism in several sandy intervals, which apparently correspond to those drilled by the water-wells if the area. The existing data aren’t sufficient to assess the commerciality of the gas. The second 3D geological model captures the subsurface structure of the alluvial Plio-Pleistocene aquifer of Tymbakion and models both the lithological character and the porosity of the sediments that comprise the aquifer, as well as assesses where is the inferred geometry of the salt-water intrusion in the basin, based on field geoelectrical / electromagnetic measurements. For this purpose, a dense network of water-wells, geoelectric soundings (VES) and transient field electromagnetic measurements (TEM) were used that allowed the correlation of the lithological descriptions in the different wells with the values of the specific electrical resistivity. Finally, the model captures the thickness variation of the aquifer and identifies 12 inferred faults that are not observed on surface, the spatial distribution of the specific electrical resistivity values throughout the aquifer and the correlates them indirectly to the lithologies. It is suggested that this model should be further used in the groundwater simulation of the Tymbaki aquifer. By this way, the 3D geological model will be validated by the dynamic data of the simulation and will help in optimizing of the simulation results, which in turn will lead to the optimization of aquifer management. In both cases, the ultimate objective is to highlight the utility of 3D geologic models as a modern and easy-to-use tool to better capture subsurface geology. In both cases, the numerous capabilities of using such tools/methodologies were not examined completely as this should be a separate study. Nevertheless, the study demonstrates the benefit of adding this kind of methodologies in the workflow and the results can be applied on that areas of the basin that show a greater interest for further study.
Degree
thesis:*- Grantor dc:publisher
- Technical University of Crete (TUC)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Panagopoulos, Georgios
- Παναγόπουλος, Γεώργιος
Subjects
dc:subject × 16- Τριδιάστατη γεωλογική προσομοίωση
- Λεκάνη Μεσσαράς
- Βιογενές αέριο
- Αλλουβιακός υδροφόρος Τυμπακίου
- 3D geological modelling
- Messara Basin
- Biogenic gas
- Alluvial aquifer of Tympaki
- Γεωεπιστήμες και Επιστήμες Περιβάλλοντος
- Φυσικές Επιστήμες
- Γεωλογία
- Ηλεκτρονικοί υπολογιστές στις γεωεπιστήμες
- Earth and Related Environmental Sciences
- Natural Sciences
- Geology
- Computers in Earth Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56597