National Technical University of Athens (NTUA)
Ανάπτυξη νανοδομημένων υλικών με βάση την τιτανία (TiO2) με προηγμένες φυσικοχημικές ιδιότητες
Abstract
dc:descriptionThe aim of this doctoral thesis is the synthesis and application of optimized TiO2 nanopowder as an efficient photocatalyst, able to act effectively in the region of either UV or visible light, targeting at the degradation of liquid and gaseous pollutants in a variety of applications. The photocatalytic activity of the newly produced titania-based materials was studied since the produced nanopowders were immobilized on various carriers (e.g. metal matrix, glassy spheres or placed in dispersion solution) to beapplied in processes requiring self-cleaning and antimicrobial properties. Specifically, in this doctoral thesis, nanostructured materials based on TiO2 were synthesized, which through their photocatalytic activity, aimed at the degradation of gaseous pollutants, organic pollutants and the enhancement of their antimicrobial behavior. Nanostructured titania, either commercially available or prepared by the solgel method with chemical or non-chemical modification, was used, which was further immobilized on a metal matrix by an electrochemical method, on glass spheres by the dip-coating method or used in suspension. It should be noted that all materials were studied in terms of their microstructure, their physicochemical properties, as well as their photocatalytic activity. The experimental results of the Ni-P/TiO2 electrolytic composite coatings showed that there is a dependence of the co-deposition rate of TiO2 nanoparticles on the imposed electrolysis conditions. Increasing the amount of titania in the electrolytic bath (from50 to 100 g/L) and the imposition of pulsed current and particularly high pulse frequencies, favor co-deposition of the reinforcing medium (TiO2). The highest codeposition rate of titania nanoparticles equal to ∼5 wt.%, was observed at conditions of ν=100 Hz and 100 g/L TiO2 within the bath. Regarding the microhardness of Ni- P/TiO2 composite coatings, it was found that the imposition of a pulsed current increases it in both cases of the amount of reinforcing agent in the bath (50 and 100 g/L). The Ni-P matrix of the composite coatings is characterized as amorphous before their heat treatment, while after the heat treatment at 400°C it crystallizes in the Ni and Ni3P phases. The microhardness of the Ni-P-TiO2 composite coatings was found to increase with the application of pulsed current, both for 50 g/L and 100 g/L reinforcing medium content within the electrolytic bath. Heat treatment enhanced the microhardness of the composite coatings in both cases (50 g/L and 100 g/L TiO2), resulting in the microhardness reaching a maximum value of ~10.49 GPa in the case of 50 g/L TiO2 in the bath and ~10 GPa for TiO2 content in the bath equal to 100 g/L. Comparing Ni-matrix coatings, simple electrolytic Ni-P coatings and Ni-P-TiO2 composite coatings, it follows that Ni-P-TiO2 coatings prepared under pulsed current conditions and with a titanium dioxide content equal to 50 g/L in the bath, showed the greatest resistance to abrasion wear. The sliding friction wear mechanisms observed before heat treatment of composite coatings are: (a) abrasion, (b) adhesion and (c) oxidation. After annealing the composite coatings at 400°C, the dominant wear mechanism is that of ploughing. The composite metal coatings prepared by applying a pulsed current at ν=100 Hz and subjected to heat treatment, indicated the most improved activity in the photocatalytic degradation of the examined pollutant. Overall, it appears that it is feasible to immobilize titania nanoparticles in a Ni-P alloy metal matrix by constant-phase pulsed current electrochemical deposition, with an incorporation rate such that, it can exhibit self-cleaning properties on an irradiated surface without degrading its mechanical properties. Then, the degradation of gaseous pollutants (volatile organic compounds-VOCs) during the biowaste drying process was studied. The purpose is to determine the gases emitted into the atmosphere from the drying of the biodegradable fraction of waste and to investigate the possibility offered by photocatalytic technology for the effective treatment of volatile organic pollutants, utilizing the experience in the field of nanotechnology. The study of the photocatalytic decomposition of these organic pollutants was carried out in a standard tubular photocatalytic reactor for the degradation of gaseous pollutants, with a catalyst bed and using integrated systems for the photocatalytic oxidation of gaseous pollutants. The experiments were performed under real temperature and humidity conditions and for pollutant concentrations exclusively on the ppb scale. The experimental results showed that the observed concentrations of volatile organic compounds emitted during the domestic bio-waste drying process are below the European Union guidelines for workplace air. The calculation of the photocatalytic parameters η% and r confirmed the ability of the material to photocatalyze VOCs, even under high pollutant concentrations, demonstrating once again the unlimited potential of photocatalytic materials. The photodegradation rate values range under UV radiation: 0.286 mg/m2·s, 0.571 mg/m2·s, 0.259 mg/m2·s and 0.257 mg/m2·s and photocatalytic efficiency values: 78.40-87.82 %, 67.91-81.96 %, 62.29-84.30 % and 69.99-82.11 % for toluene, p and xylene and ethylbenzene, respectively. Lastly, in this doctoral thesis, different dopants were used to chemically modify TiO2, in order to extend its photocatalytic activation within the visible light region, through the sol-gel method, thus resulting in the synthesis of N-, N,S- and Ag @N-doped TiO2 powders. The successful chemical modification of TiO2 using N, S and Ag elements was confirmed by XPS analysis of the surface of the powders. The dominant crystalline phase of the chemically modified TiO2 powders was anatase, with reducedEg values, compared to commercially available TiO2 (Evonik P25). The average crystallite size of prepared powders ranged from 1.80 to 2.13 nm. The produced powders were initially tested for their photocatalytic efficiency in the degradation of aqueous solution of Rhodamine B (RhB) dye under visible light irradiation. The Ag@NTiO2 powder showed the highest efficiency among all studied chemically modified TiO2 powders, reaching total degradation (100 %) of RhB at 240 min, which was also verified through the results obtained from TOC analysis. In order to evaluate the durability of the synthesized powders, five recycling tests were performed, which showed that the loss of photocatalytic efficiency was equal to 20.68 %, 19.06 % and 8.34 % for N-TiO2, N,S-TiO2 and Ag@N-TiO2, respectively. Then, the decontamination effect of the produced powders was evaluated in terms of inactivation of E. coli and total coliforms, using a specially designed semi-pilot scale photocatalytic reactor using real municipal wastewater effluents, which was constructed in order to study the replacement of the chlorination stage in municipal wastewater treatment plants with the method of photocatalysis and the use of solar energy. Ag@N-TiO2 nanopowder was also found to be significantly more active for both groups of bacteria, leading to complete inactivation in less than 35 min, possibly due to higher H2O2/·OH production, as revealed by the study of the photocatalytic mechanism. In addition, the Ag@N-TiO2 nanoparticles exhibited excellent photocatalytic and disinfection stability even after 5 consecutive recycling tests (8.34 % activity loss and complete inactivation, respectively). The results demonstrated the potential of Ag@N-TiO2 nanopowder to be used as a sustainable, environmentally friendly approach for the photocatalytic inactivation of pathogenic bacteria as an alternative decontamination approach for municipal wastewater treatment plant effluents experiencing strong seasonal population fluctuations.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Tsoukleris, Dimitrios
- Τσούκλερης, Δημήτριος
Subjects
dc:subject × 26- TiO2 τιτανία
- Χημική τροποποίηση
- Φωτοκατάλυση
- Επικαλύψεις
- Σφαιρίδια
- Υγροί ρύποι
- Αέριοι ρύποι
- Βιολογικός καθαρισμός αστικών λυμάτων
- Απολύμανση
- Αυτοκαθαριζόμενες επιφάνειες
- Titania
- Chemical modification
- Photocatalysis
- Coatings
- Spheres
- Liquid pollutants
- Gaseous pollutants
- Biological treatment of municipal wastewater
- Disinfection
- Self-cleaning surfaces
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημεία και Τεχνολογία διεργασιών
- Chemical Engineering
- Engineering and Technology
- Process Chemistry and Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56611