University of Ioannina
Ανάπτυξη μαθηματικών και υπολογιστικών μοντέλων για τη μελέτη συνθέτων και θερμοηλεκτρικών υλικών-δομών
Abstract
dc:descriptionIn the first chapter there is an introduction to the thermoelectric phenomenon where the necessary concepts for the evaluation of thermoelectric materials are presented and the problem is analyzed on a micro and macro scale. In the second chapter, the thermoelectric effect at the continuum level is presented. The differential equations governing the phenomenon are given and then the finite element methodology and relative equations are described. In the following, some very basic concepts of artificial neural networks are presented and the modern literature and state-of-the-art for both the thermoelectric phenomenon and the modeling of thermoelectric electrical devices are reviewed. In the third chapter, one out of a total of four thermoelectric generators is modeled - devices which are based on carbon fibers and have all been manufactured in the Composite and Smart Materials Laboratory (CSML) of the Materials Science Engineering Department (MSED) and are exact copies of them, with aim to study their thermoelectric efficiency. It has been studied in terms of design features in order to maximize its electrical and power efficiency. In addition, a parametric analysis of the device is conducted for various design parameters such as the thermal conductivity of the resin, the length of the thermocouples etc. and the performance is adjusted in relation to the design parameters with the help of neural networks. In the fourth chapter, three devices (also manufactured in CSML) based on semiconducting inks on glass fibers were simulated and their thermoelectric performance was studied. In the fifth chapter, the basic theoretical background of percolation theory is presented, i.e. mesh percolation, continuum percolation, and the techniques used mostly in modern literature are presented. The methods for calculating the thermal-electrical properties of a random composite at the microstructure level are also analyzed. In chapter six, a new theoretical model and its computational implementation in two dimensions (2D) for the study of continuum percolation phenomena is presented. The aim was the development of a model which has inherent similarity with lattice percolation. The physical medium is simulated as an (infinite) grid comprising of representative surface elements (RSEs). Assuming medium's homogeneity the RSEs average propagation probability can be interpreted and generalized as the occupation probability for the infinite medium. The RSE's resulting from a Monte Carlo iterative process involving the creation of the relative small samples and their propagation ability checked individually from their top to bottom. The propagation in the actual physical medium takes place when the calculated probability (p) is higher than the critical propagation probability (0.5927). The proposed method treats the low dimensional material system as a 2D infinite homogenized medium which can be further reduced leading to a mapping on a square lattice with site occupation. The proposed numerical algorithm considers the particles in the RSE as digitized using sites-pixels without contacts. Following the digitization procedure, traditional computational methods like Depth First Search are involved for the detection of possible propagation paths in the randomly selected square samples. For the confirmation of the theoretical model as well as the algorithm, problems known from the literature were used and it was found that regardless of microstructure at the critical concentration the percolation probability on the RSE converges to the anticipated 0.5927 value. In addition, the results obtained from the proposed methodology compare very well with available predictions in the literature. New results are reported covering a wide range of particle geometrical types (circular, elliptical, rectangular) and surface fractions in matrix-filler or matrix-fillers systems proving the robustness and applicability of the proposed methodology. In the seventh chapter, for the first time, the electrical-thermal conductivity of a composite random material is correlated with the number of conductive paths, the mean path length and the mean effective path width measured in a representative surface element (RSE) by Monte Carlo sampling. This work is organized in two parts. The theoretical calculation takes place in the first part for the correlation of conductive paths by adopting three approaches (incremental with respect to accuracy and complexity) based on: i) one-component straight paths, ii) multi-component straight paths and iii) multi - component non-straight paths. In the second part, a novel numerical methodology for the calculation of the conductance of the RSE through the conductive paths, mean path length and the mean effective path is developed for the general model of multi-component non-straight line paths based on Ohm's law. In addition, a methodology that reduces the calculated properties from the microscale to the macroscale is proposed, that takes into account the probability of percolation for finite sizes and the average value of the property from the samples in which percolation occurs. After the necessary consistency steps and verification of the method and its implementation on random binary material systems, it is further applied to solve synthetic continuous percolation problems at microscale and macroscale. The results and the accuracy of calculations are in close agreement with existing models. The computational speed and memory requirements of the newly proposed methodology are advantageous when compared to boundary value problem methods such as Finite Elements (FE) - Differences (FD) and Resistor Networks technique. The electrical (DC) and thermal conductivity follow the same scaling relation and the proposed methodology can be calculated at the same stage without additional cost. In a random binary medium the simulations showed that a scaling law is followed with an exponent value very close to 1.3. In addition, the number of conductive paths, the average length of the paths, and the effective width follow scaling laws with exponents 1.44 , -0.25 and -0.39, respectively. Finally, the eighth chapter presents the conclusions as well as possible directions for future research.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Lamprou, Eleftherios
- Λάμπρου, Ελευθέριος
Subjects
dc:subject × 20- Θερμοηλεκτρική γεννήτρια
- Θεωρία διήθησης
- Θερμική αγωγιμότητα
- Ηλεκτρική αγωγιμότητα
- Μέθοδος πεπερασμένων στοιχείων
- Προσομοιώσεις
- Monte Carlo προσομοίωση
- Thermoelectric generator
- Finite element method
- Percolation theory
- Simulation
- Monte carlo computer simulations
- Thermal conductivity
- Conductivity electrical
- Μηχανική Υλικών
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη υλικών, διεπιστημονική προσέγγιση
- Materials Engineering
- Engineering and Technology
- Materials science, interdisciplinary
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56787