Back to search

National Technical University of Athens (NTUA)

Σύνθεση νανο-μετακαολίνη μέσω μηχανικής ενεργοποίησης για την παραγωγή κονιαμάτων με προηγμένες ιδιότητες

Abstract

dc:description

Kaolin is a widely used industrial mineral which is characterized by essential properties such as chemical inertness, easy dispersion, low production costs, etc. After heat treatment at temperatures higher than 450oC, kaolin is transformed to metakaolin, an amorphous material with increased pozzolanic activity. For this reason, metakaolin is used as an additive in concrete applications enhancing its mechanical properties and mainly, its durability. Nowadays, scientific interest is focused on the promising use of nanoparticles (<10nm) in a variety of applications. Materials belongs to this size range have particularly improved properties in comparison with the materials of the same chemical composition but with normal particle size. Metakaolin is feasible to obtain nano structure using a ball milling method at appropriate speed and duration conditions. Nanotechnology is already applied in the concrete industry leading to the production of advanced materials with innovative properties. These new products have added value compared to conventional ones and are of great commercial interest due to the low production cost and low energy consumption. This PhD thesis focuses on development of nano-metakaolin for mortars applications. The study concerns a new production process, for the nanomaterial, based on high energy ball milling method and its comparison with the existing one (two-stage method, i.e., heat treatment followed by milling). The proposed new procedure has a significant advantage. The production of nanometakaolin occurs in only one stage, whereby choosing the appropriate conditions (milling time and speed), the resulting product is directly nanometakaolin. It is also a low energy consumption and environmental friendly process since there is no requirement for using fossil fuels during production. The examined materials are two qualities of kaolin, one high and one low purity. The first stage of the experimental process concerns the heat treatment of the initial kaolins and the produced samples characterization regarding their activation (XRD, FTIR) and their pozzolanic activity (Chapelle method). A comparison is made between the two raw materials. Following, the appropriate activation conditions and corresponding samples are selected to produce nanometakaolin in the next stage. The second stage concerns the mechanical treatment of both raw materials and selected heat-treated samples. For all samples, a complete evaluation was carried out in terms of their thermal behavior (activation, activity) and in connection to the particle size distribution and morphology (DLS, BET, SEM). For the nanometakaolin samples produced, an investigation on the activation conditions was followed to find the optimal sample. The comparisons between the samples concerned the duration and the speed but also in combination with the results of the microstructure characterizations. In addition, a comparison was made regarding the pozzolanicity of the mechanically activated samples the thermally activated ones. Due to the different amorphization mechanism the values seem to have a large discrepancy between them. However, in order to fully understand and safely draw conclusions; the mechanically activated samples evaluated by their effect on the production of mortars. This study focused mainly on the examination of the mechanical properties (flexural strength and uniaxial compression) but also on the incorporation of the nanomaterial in order to obtain the best results. Finally, a summary calculation of the energy consumption concerning all stages of the nanometakaolin production, and its final application was carried out. The results confirm that the proposed production method differs significantly from the conventional one due to its energy and sustainability.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kosmidi, Dimitra
  • Κοσμίδη, Δήμητρα

Subjects

dc:subject × 11

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/56893

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kosmidi, Dimitra; Κοσμίδη, Δήμητρα. Σύνθεση νανο-μετακαολίνη μέσω μηχανικής ενεργοποίησης για την παραγωγή κονιαμάτων με προηγμένες ιδιότητες. National Technical University of Athens (NTUA), 2024. http://hdl.handle.net/10442/hedi/56893