National Technical University of Athens (NTUA)
Κατασκευή και χαρακτηρισμός υπερυδρόφοβων επιφανειών σε μέταλλα και πολυμερή για ενεργειακές εφαρμογές
Abstract
dc:descriptionA surface is characterized as superhydrophobic when the contact angle it forms with a water droplet is above 150° and its hysteresis angle is less than 10°. The contact angle represents the effect of the surface tension of a liquid in relation to the adhesive forces of the droplet with the surface, while the hysteresis angle represents the uniformity of the surface. To achieve superhydrophobicity, it is necessary to have an appropriate topography, which will minimize the contact of the surface with the droplet, and a low surface energy of the surface, which will reduce the adhesive forces with the droplet. In recent years, superhydrophobization of surfaces has drawn the attention of the scientific community due to its potential for application in many industrial and technological sectors, and particularly because of the possibilities it offers in terms of energy saving and optimization of existing processes. Specifically, the ice-phobic properties that superhydrophobization provides to wind turbine or aircraft blades result in the reduction of asymmetric stresses and, therefore, maintenance requirements, while simultaneously increasing their operational intervals. Additionally, the superhydrophobization of ship hulls contributes to the reduction of resistance during sailing, avoidance of algae adhesion, and consequently, reduction in the need for dry docking and simultaneous fuel savings. The superhydrophobization of liquid transport pipes results in the reduction of friction developed between the liquid and the pipe, thus minimizing the energy required for their transport. Finally, the most significant contribution of superhydrophobicity to global energy savings and environmental protection lies in the improvement of heat transfer in exchangers and condensers used in power generation plants. The production of electrical energy contributes more than any other activity to the consumption of fossil or nuclear fuels, making even a small improvement in the efficiency of the power generation thermodynamic cycle—specifically the Rankine cycle—have tremendous implications for fuel savings. As an example, it is mentioned that optimizing the power generation efficiency of a 900 MW lignite station from 40% to 40.1% results in a reduction of over 19,000 tons annually in coal consumption, which translates into a significant environmental benefit. The optimization of energy production facilities through superhydrophobic surfaces is achieved through the condensation of steam coming from the turbine as discrete droplets on the surfaces of the heat exchanger, which serves as a condenser in the Rankine cycle. The typical steam condensation on metallic surfaces occurs in the form of a water film which binds the surface and adds additional thermal resistances during the heat transfer released during condensation. In contrast, the form of condensation as discrete, highly mobile droplets increases the availability of the exchanger for further condensation and reduces the thermal resistances posed by the creation of a water film on the cold pipes of the exchangers. To achieve condensation in the form of discrete droplets, the substrates on which condensation occurs must have low surface energy and a small contact area with water. The low surface energy forces the shape of the droplet to approach spherical, because the intermolecular forces within the droplet overcome the forces that develop between it and the surface. Minimizing the contact area increases the mobility of the droplets and, therefore, the frequency of their departure from the surface. In this direction, the current Doctoral Thesis involves the construction and characterization of superhydrophobic surfaces on metallic substrates for their use in heat exchangers. Specifically, the objectives of the work are: a) the construction of superhydrophobic surfaces on metallic and polymeric substrates that are resistant to thermal and/or hydrolytic stress, b) the achievement of steam condensation in the form of discrete droplets on metallic superhydrophobic surfaces, in order to improve the performance of heat transfer during the phase change of steam. For the construction of the superhydrophobic surfaces, two different approaches were followed, which are based on the necessary criteria for achieving superhydrophobicity. The first approach includes the creation of hierarchical structuring on metallic substrates and the subsequent reduction of their surface energy, while the second involves the coating of a thick hydrophobic film and the subsequent creation of an appropriate topography on it.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2023
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Sarkiris, Panagiotis
- Σαρκίρης, Παναγιώτης
Subjects
dc:subject × 34- Υπερυδρόφοβες επιφάνειες
- Νανοδομές
- Μικροδομές
- Συμπύκνωση
- Μεταφορά θερμότητας
- Νανομετρολογία
- Μήκος συσχέτισης
- Monte Carlo προσομοίωση
- Χαρακτηρισμός επιφανειών
- Εγχάραξη με πλάσμα
- Εναπόθεση με πλάσμα
- Επιφανειακές κατεργασίες πλάσματος
- Διεπιφανειακά φαινόμενα
- Superhydrophobic surfaces
- Micro-nanostructuring
- Condensation
- Dropwise Condensation
- Heat transfer
- Nanometrology
- Autocorrelation function
- Monte Carlo simulation
- Plasma etching
- Plasma deposition
- Thin films
- Surface characterization
- Wetting
- Interfacial phenomena
- Phase change phenomena
- Νανοτεχνολογία
- Επιστήμες Μηχανικού και Τεχνολογία
- Νανοεπιστήμη και Νανοτεχνολογία
- Nano-Technology
- Engineering and Technology
- Nanoscience and Nanotechnology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/56953