University of Crete (UOC)
Metal halide perovskites: synthesis and application in gas sensing
Abstract
dc:descriptionThe high demand for detecting and monitoring a diverse array of air pollutant, toxic and, explosive gases has led to major advancements in gas sensing technologies. Gas sensors are widely utilized in both commercial and industrial applications, ranging from air-quality monitoring to medicine. Conventional gas sensors struggle with limitations such as low sensitivity, poor selectivity, and limited operational stability. In this context, the development of novel materials with improved sensing characteristics is crucial. Recently, metal halide perovskites with the chemical formula ABX₃ (A = organic/inorganic cation, B = divalent metal, X = halide ion) have emerged as promising candidates for gas sensing applications owing to their ability to convert environmental stimuli into electrical or optical signals. This research explored the feasibility of utilizing ligand-free all-inorganic metal halide perovskites as room temperature gas sensors, providing insights into the underlying sensing mechanism. Particularly, this study investigated the impact of the shape of CsPbBr₃ microcrystals (μCs) by tuning the crystal growth conditions on their ozone (O₃) sensing properties. Well-defined microcubes demonstrated the ability to detect with accuracy down to 187 ppb, while their rounded microcube counterparts displayed a remarkable response of 13% at 4 ppb, establishing them as promising candidates for ultra-sensitive O₃ detection. Additionally, the size-dependent properties of CsPbBr₃ in O₃ detection were studied by employing nanocrystals, revealing their relatively lower effectiveness compared to the μCs. Furthermore, motivated by the exceptional sensitivity and the simplicity of synthesis of rounded microcubes, their potential for hydrogen detection was also explored. Remarkably, the hydrogen sensor demonstrated rapid detection capabilities, achieving responses within 75 s for extremely low concentrations, with response levels ranging from 1.5% at 1 ppm to 94% at 100 ppm. Subsequently, to gain a deeper understanding of the underlying sensing mechanism in metal halide perovskites, the effect of halide composition and the metal doping on O₃ sensing was investigated. This was achieved by synthesizing metal-undoped and Mn-doped mixed halide perovskites and evaluating their O₃ sensing behaviors. The investigation underscored the influence of halide composition on sensing behavior, with distinct p-type or n-type responses observed in CsPbBr₃ and CsPbCl₃ μCs, respectively. Undoped mixed halide systems corroborated these observations, with Br-rich systems demonstrating a p-type behavior and Cl-rich based-sensors displaying an n-type sensing response across all tested O₃ concentrations, suggesting a clear correlation between the halogen content and sensing behavior. Additionally, Mn-doping significantly enhanced the sensing capability of the μCs by facilitating the O₃ adsorption process, as supported by both theoretical and experimental evidence. The morphological, structural and optical properties, as well as the sensing behavior of undoped and Mn-doped sensors were re-evaluated after storage under ambient conditions, providing valuable insights into the evolving sensing behaviors and highlighting the impact of the dynamic instabilities over time. Interestingly, all sensing elements showed a conductivity enhancement over time, with some sensors showing conductivity transitions attributed to material instabilities. Additionally, while the response of CsPbBr₃ μCs significantly decreased over time, the response of undoped mixed halides and CsPbCl₃ perovskites remained stable, albeit low, showing a limited capability in distinguishing different O₃ concentrations. Conversely, despite material instabilities, Mn-doped systems retained their gas sensing capabilities, emerging as the optimal choice in terms of both response and long-term sensing stability. Finally, despite the promising results of Pb-based perovskite gas sensors, their inherit toxicity poses a significant environmental concern. Therefore, the final aim of this research was to evaluate the O₃ sensing capability of Pb-free halide perovskites. For this purpose, Cs2AgBiBr6 μCs were fabricated under ambient conditions using a facile, cost-effective solution-based method. Notably, the sensor was able to operate under the ultra-low power of 0.1 V with the ability to detect down to 160 ppb of O₃. Additionally, the response and recovery times of less than 50 s, reinforce its suitability for real-time detection applications. Interestingly, the sensor demonstrated remarkable selectivity for O₃ detection compared to other target gases, while exhibited the ability to operate under harsh conditions, including high relative humidity levels and high operation temperatures.
Degree
thesis:*- Grantor dc:publisher
- University of Crete (UOC)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Argyrou, Aikaterini
- Αργυρού, Αικατερίνη
Subjects
dc:subject × 28- Ανίχνευση αερίων
- Θερμοκρασία δωματίου
- Αισθητήρας όζοντος χωρίς μόλυβδο
- Προσμίξεις
- Ανιοντική ανταλλαγή
- Μηχανισμός ανίχνευσης
- Μικροκρύσταλλοι
- Μέθοδος καταβύθισης
- Επιλεκτικότητα
- Σταθερότητα
- Επαναληψιμότητα
- Gas sensing
- Room temperature
- Pb-free O3 sensors
- Μetal doping
- Anion exchange
- Sensing mechanism
- Microcrystals
- Precipitation method
- Selectivity
- Stability
- Repeatability
- Χημεία
- Φυσικές Επιστήμες
- Χημεία, άλλοι τομείς
- Chemical Sciences
- Natural Sciences
- Chemistry, miscellaneous
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/57023