Aristotle University Of Thessaloniki (AUTH)
Development of advanced binary composites by Sn/Fe oxides and renewable raw materials as adsorbents for drinking water purification
Abstract
dc:descriptionThe presence of Cr(VI) in the aqueous environment is considered a major worldwide problem which turns more urgent when referring to drinking water resources. Pollution with Cr(VI) has been attributed to both anthropogenic and geological processes depending on the presence of intensive industrial activities or occurring rock leaching mechanisms in the surrounding of each water reservoir. The long-term accumulation of Cr(VI) in the human body may be responsible for serious health problems, so the European Union members decided to settle a specific maximum contaminant level for Cr(VI) at 25 μg/L, which will be fully applied by 2036. Several methods have been employed for Cr(VI) removal from aqueous solutions, where among tested methods, the chemical precipitation using reagents and the adsorption using granular solids have been qualified as those with the higher potential for implementation in large-scale facilities. The aqueous speciation of Cr(VI) indicates CrO42- as the major specie, in neutral pH values and low residual concentrations. Its high mobility and limited affinity to common adsorbents comparing to the Cr(III) forms explains the significant higher toxicity of Cr(VI) and the lack of a selectively acting technology for its efficient removal. An optimum adsorbent for Cr(VI) removal is featured with an electron donating potential that facilitates the intermediate reduction of Cr(VI) and the subsequent deposition or adsorption of insoluble Cr(III)-hydroxides onto the adsorbent material.In this frame, this dissertation attempts to provide a competitive solution to the serious problem of drinking water pollution with Cr(VI), by developing high-performing low-cost nanocomposite adsorbents, combining modern knowledge on nanotechnology, magnetism and water treatment adapted to the principles of green chemistry, good practices for synthesis and sustainability. Particularly, the first (two groups) of nanocomposite adsorbents developed by combining an active inorganic phase (tin oxyhydroxides or Fe3O4 nanoparticles) incorporated with different biochar substrates, including olive stone and hemp stem received by the valorization of biomass residuals and biochar from sewage sludge received from municipal waste. The third nanocomposite involved the development of Fe3O4-decorated tin oxyhydroxide nanocomposite. Study of raw materials and their derivative biochar samples was a fundamental step in the manufacture of the binary nanocomposites, and to the interpretation of the nanocomposites adsorption performance results, indicating that biochar with the highest C/O ratio (or C/H ratio) comprise the optimum substrate for the incorporation of the active phase. Additionally, for the preparation of Fe3O4 nanoparticles with the maximum Cr(VI) adsorption capacity, the effect of OH- excess, the counterions, and the use of various reagents was investigated and compared to the typical synthesis procedure. Results revealed that nanoparticles prepared with FeCl2 reagent demonstrated the highest adsorption capacity. The synthesis of tin-oxyhydroxides nanostructures was conducted in a batch reactor by the hydrolysis of Sn2+ salts under various different pH values, indicating that adjusting the pH of solution at 2, results in the formation of the abhurite structure (Sn21O6(OH)14Cl16), providing the highest adsorption performance in compliance with upcoming regulation of 25 μg/L.In this way, tin oxyhydroxides and Fe3O4 nanostructures acting as reducing agent of Cr(VI) to Cr(III), were dispersed into the biochar matrixes of olive stone, hemp stem and sewage sludge. Although biochar-based nanocomposites have been studied as Cr(VI) adsorbents, there is a gap in research field for investigating the performance of these adsorbents in a concentration range and pH values simulating drinking water condition. The proper blending procedure, the percentage of tin oxyhydroxides or Fe3O4 nanostructures and possible chemical interactions with biochar were thoroughly investigated as critical parameters to optimize the Cr(VI) uptake of the nanocomposites with respect to the efficiency of the pure phase. Evaluation of their uptake capacity was carried out under realistic conditions of water treatment for drinking purposes concerning the pH and concentrations close to the regulation limit of 25 μg/L. The adsorption performance demonstrated that specific nanocomposites succeed an increase of the adsorption capacity, in comparison to the pure phase, attributed to the homogeneous distribution of the adsorbent’s grains to biochar’s surface. Consequently, these nanocomposites achieved to increase the uptake capacity per active phase content and replacement a significant part of it by utilizing a low-cost compound produced with a renewable source. Additionally, the synthesis of tin oxyhydroxides structures decorated with Fe3O4 nanoparticles serving as a magnetically-responding phase was implemented, while advanced characterization techniques were employed to validate the properties of such nanocomposites. This novel kind nanocomposite is developed to provide sufficient magnetic features, promoting the use of the nanocomposite in a low-pressure setup based on the direct dispersion in polluted water and the recovery by proper application of magnetic field gradient on the flow. The homogeneous distribution of Fe3O4 nanoparticles on the tin oxyhydroxides structures, feature a nanocomposite with magnetic response whereas 10% wt. loaded nanocomposite preserving an efficient Cr(VI) uptake capacity for residual concentrations below 25 μg/L. The efficiency of the magnetically responded nanocomposites was validated in a pilot unit operating in a sequence of a stirring reactor and a rotary magnetic separator showing an alternative and competitive application path than typical fixed-bed filtration. The optimization of the pilot setup was performed on the basis of various nanocomposite’s doses in the contact reactor and different flowrates or equivalent contact periods in the reactor, indicating that at higher contact times complete recovery of the adsorbent is feasible at residual concentration below 25 μg/L, and for the proportional scale-up potential. Finally, the chemical stability of Cr(VI)-loaded nanocomposite and its toxicological safety also guarantee a good certification and commercialization potential.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Asimakidou, Theopoula
- Ασημακίδου, Θεοπούλα
Subjects
dc:subject × 16Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/57100