Aristotle University Of Thessaloniki (AUTH)
Διαχείριση υγρών αποβλήτων ελαιουργείων με χρήση καινοτόμων βιοπροσροφητικών υλικών
Abstract
dc:descriptionOlive oil is one of the most widely consumed oils worldwide, with a significant economic impact, especially for Mediterranean countries. During its extraction, large quantities of by-products rich in bioactive components are produced. These wastes could be isolated and used as additives for the production of high-value-added functional products, contributing to waste depollution. Initially, a comparative study of phenolic compound extraction from SCG using ultrasound- and microwave-assisted extraction and organic solvents was conducted. Although UAE achieved the lowest extraction yields, it was chosen as the most suitable due to its shorter operation time and lower solvent consumption. Additionally, the effect of drying or degreasing of SCG on the extraction efficiency was studied. In the second part of the research, the solid residues, after extraction, were used as biosorbents, for decontamination and recovery of OMW phenolic compounds. Various operating parameters were investigated, such as temperature, pH, adsorbent ratio, initial phenolic concentration in the wastewater, achieving under the optimum adsorption conditions a recovery of phenolic content of 45.44%. Furthermore, the adsorption of gallic acid using SCG as biosorbent was also optimized (70.69%). The research also focused on elucidating the complex mechanism of adsorption. Consequently, the adsorption of the main OMW phenolics was studied individually under the optimal adsorption conditions of OMW phenolics (p-coumaric acid, caffeic acid, gallic acid, tyrosol, hydroxytyrosol, and oleuropein). Additionally, a standard solution containing a mixture of the aforementioned compounds in a ratio simulating the phenolic profile of OMW was also prepared. The obtained data indicated that adsorption is primarily influenced by the phenolic content of the waste. To further interpret the adsorption process, the experimental data were correlated with the physicochemical properties of the components, such as molecular weight, octanol-water partition coefficient and water solubility. Under the two optimal adsorption conditions, the sorption isotherms were investigated, and the experimental data were fitted to the linear model, Langmuir, Freundlich, Temkin, Redlich-Peterson, Sips and Aranovich isotherms, with the Langmuir model best interpreting the results. Regarding the kinetic data, they were fitted to pseudo-first-order, pseudo-second-order, intramolecular diffusion and Elovich models, with the intramolecular diffusion model being more suitable for describing the main stage of adsorption, suggesting that physical adsorption is the main mechanism taking place but not the only one, as chemical sorption also occurs. Finally, increase in adsorption efficiency was attempted by chemical or thermal pretreatment of the biosorbent. The most significant increase was observed with thermal activation at 250oC and chemical activation using sodium hydroxide or by protein coating, an innovative activation technique. Analytical techniques, such as HPLC, SEM and FT-IR spectroscopy, were applied for the holistic interpretation of the adsorption mechanism and qualitatively analysis of the wastes before and after adsorption.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Solomakou, Nikoletta
- Σολωμάκου, Νικολέττα
Subjects
dc:subject × 14- Υγρά απόβλητα ελαιουργείων
- Στερεά υπολείμματα καφέ
- Προσρόφηση
- Βιοπροσροφητικά
- Olive mill wastewaters
- Spent coffee grounds
- Adsorption
- Biosorbents
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη και Τεχνολογία τροφίμων
- Other Engineering and Technologies
- Engineering and Technology
- Food Science and Technology
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/57121