Back to search

National Technical University of Athens (NTUA)

Απεικόνιση μικροσκοπίας ατομικής δύναμης βιολογικών μακρομορίων

Abstract

dc:description

The main aims of this PhD thesis were initially the production of elastin stock suspension and the study of the elastin self-assembly at the nanoscale. Different parameters affecting the formation of the fibers are controlled, such as the solvent mixed with the elastin, its concentration, the temperature of stock suspension, and the time of fibril formation. The control and imaging of the fibrils were carried out using Atomic Force Microscope (AFM), where structural, morphological and topological characteristics of the elastin nanofibrils were investigated. Moreover, aims of this research were the study of elastin fibers under the influence of ultraviolet irradiation and red low level laser irradiation. Finally, the production of elastin-collagen mother solution was studied and imaging of the mixed fibers created with AFM.The research objectives of the current PhD thesis were: the production of elastin stock suspension. the development of elastin based bio-surfaces. the study of elastin self-assembly from nanofibrils, to fibrils and finally to elastin fibers. the control of different parameters that affect fibril formation, such as:solvent mixed with elastin to create the elastin stock suspension, concentration of elastin to create fibrils, temperature of the stock suspension and time fibrillogenesis. the development of techniques for characterization and imaging of elastin fibrils at the nanoscale with Atomic Force Imaging Microscopy. the quantification of surface changes in diameter, height and length of nanofibrils, which occur due to changes in the physical or chemical properties of elastin. the control of sample topography, so that it is possible to repeatably find the exact same fiber, for a valid comparison of its nano-characteristics. the investigation of the effect of UV irradiation on the morphological and topological characteristics of elastin nanofibrils. the investigation of the effect of red low-power laser irradiation on the morphological and topological characteristics of elastin nanofibrils. the production of elastin/collagen stock solution. the development of bio-surfaces with a combination of elastin and collagen and imaging of their corresponding nanofibrils.The development of nanotechnology and biomaterials is currently at the cutting edge of research in a wide range of sciences. The utilization of biomaterials to develop high efficiency applications, which will be utilized as biosensors and functional bio-surfaces, but also to study the effect of electromagnetic irradiation on biological samples. The investigation of these interactions at the nanoscale is of great scientific interest. The extensive use of biological macromolecules in biomedical applications, as well as their abundance in the body, led to the choice of elastin to be studied in this PhD thesis. Studies on the biological macromolecule of elastin are few, as it is a complex protein.Elastin is an extracellular matrix protein, providing elasticity to the organs, such as skin, blood vessels, lungs and elastic ligaments, presenting self-assembling ability to form elastic fibers. The elastin protein, as a component of elastin fibers, is one of the major proteins found in connective tissue and is responsible for the elasticity of tissues. It provides resilience to the human body, assembled as a continuous mesh of fibers that require to be deformed repetitively and reversibly. Thus, it is of great importance to investigate the development of the nanostructural surface of elastin-based biomaterials, as few studies of this complex protein were in the nanoscale level.Initially, the purpose of this research was to investigated the appropriate elastin stock suspension under different parameters and the self-assembly of the elastin structure, from nanofibrils, to fibrils and finally to elastin fibers. To obtain an optimal and valid result, different experimental parameters were used, such as suspension medium, elastin concentration, temperature of stock suspension and time interval after the preparation of the stock suspension. Structural and topographical properties such as diameter, height difference and length of elastin nanofibrils, fibrils and fibers were investigated by AFM imaging.Atomic force microscopy was applied in order to investigate how different experimental parameters affected fiber development and morphology. The results demonstrated that through altering a number of experimental parameters, it was possible to affect the self-assembly procedure of elastin fibers from nanofibers and the formation of elastin nanostructured mesh consisting of naturally occurring fibers. Further clarification of the contribution of different parameters on fibril formation will enable the design and control of elastin-based nanobiomaterials with predetermined characteristics.In the second part of this PhD thesis, the effect of UV irradiation on elastin fibrils was investigated, as well as the mechanisms involved were clarified. Investigating the interaction of light with biological tissue can lead to the utilization of minimally invasive light irradiation for diagnostic and therapeutic purposes. In addition, the effect of irradiation on biological tissue has been associated with various pathological conditions. Specifically, the effect of ultraviolet irradiation on the body is linked to the phenomenon of photoaging, but also to skin cancer. In many cases this irradiation has been used to sterilize laboratory equipment and space, but also to improve the mechanical properties of biomaterials. Although the interactions of irradiation with biological tissue have been extensively investigated, the mechanisms governing them at nanoscale have not been fully elucidated and especially the effect on surface nano-features remains unclear. The effect on nanotopography is crucial, as the majority of biological interactions take place at interfaces.Subsequently on this research, the effect of low-power red irradiation on elastin fibers was studied using Atomic Force Microscopy. The effect of this irradiation with biological tissues was investigated by the method of low level laser therapy (LLLT). LLLT is applied to heal wounds, rebuild damaged tissues and treat photoaging. It is a controlled technique that contributes to the natural biosynthesis of elastin and does not cause unwanted thermal effects on the applied tissues. In general, the interaction of red low-power irradiation with biological tissue has been investigated at the macroscale. However, the process and the mechanisms that occur at the nano-level have not been scientifically clarified. Τhe interaction of this irradiation on elastin fibers in the nanoscale remains unknown on international level. Therefore, it is very important to clarify these complex processes.In the last part of this PhD thesis, the creation of a stock solution of elastin/collagen at a specific concentration was investigated. Bio-surfaces were developed from this mixed solution, so elastin and collagen fibrils were imaged as a nanoscale mesh using AFM. Investigating this composite sample is of great importance, as most biological tissues such as skin, lungs and arteries are composed of a combination of these two proteins and there are no corresponding studies on international level that image elastin and collagen nanofibrils with such precision. Finally, in order to perform the imaging and nano-characterization of elastin fibrils, as well as to achieve the quantification of the surface features, high-resolution imaging Atomic Force Microscopy techniques were developed. AFM has emerged as a powerful tool for imaging and characterizing specific features on nanoscale surfaces of elastin fibrils. Simultaneously, image analysis and processing techniques were used to obtain qualitative and quantitative data from the images taken through AFM.The results obtained from the experiments are presented below. In the first experiments, the findings showed that optimal conditions for observing self-assembly process and formation of elastin fibrils in nanoscale were elastin concentration of 1% w/v in ultrapure water at a temperature of 20 °C, with a minimum incubation period of two weeks after creating the stock suspension. Specifically, the study of self-assembly led to both qualitative and quantitative results, where the average values of the diameters of fibers (549.64±25.4) nm, fibrils (321.3±21.0) nm and nanofibrils were calculated (121.0±21.0) nm and their respective heights (88.8±5.7) nm, (27.7±3.3) nm and (4.5±0.7) nm.In the following experiments, the topographical properties of elastin fibers/fibrils/nanofibrils in nanoscale were examined, before and after the effect of UV irradiation with AFM imaging methods. The results indicate that exposure to UV irradiation causes a significant decrease in the height and length values of the nanofibrils. It leads to an increase of their diameter, a large change in roughness not only of the surface of the fibers, but also of the entire sample in long irradiation times. Specifically, in short UV irradiation times of 10 to 15 min there was a significant reduction at the height of the nanofibrils by 20% and a reduction in the diameter of the fibers by 11%. There is a continuous decrease in the length of fibers, fibrils and nanofibrils, both in short and medium times (50min and 60min) by 11%, 19% and 13% respectively. In long exposure times to UV irradiation, either intermittent (3 times x 1h), or continuous (4h), the total increase in diameter is 29% and 54%, while the total decrease in height is 24% and 27% respectively. The alteration in the surface roughness of the elastin nanofibrils increases as the UV exposure times increase.Following the experiments, the structural properties of the elastin fibers/fibrils/nanofibrils were first investigated for times (3.75min, 7.5min, 11.25min and 15min) of low power red radiation. The widening of the diameter is observed, as dimensions increase from fiber to fibril and finally to nanofibril, but also as a function of the irradiation time. The height increase in the case of fibers and fibrils is approximately equal to 27%. In contrast, the nanofibril shows a huge reduction in its height by about 40%. As the exposure time increases, the fibrils lengthen by 9%, while the fibers by approximately 14%. The corresponding percentage drop in nanofibril length is 14.5%. Then it is found that depending on the time of exposure of the fibril to the red radiation, the way of increasing its diameter changed. At short irradiation times (0-15min) a sharp and large change in the expansion of the elastin fibril can be seen, reaching 20.81%. An increase that finally reaches 15.34% is also observed in the diameter of the fibril during its exposure to radiation with medium duration times (0-45min). In the long irradiation times (0-3h) it has a smoother increase which finally reaches the rate of 20.18%. In addition, the fibril height has a similar variation with its diameter in the cases with short and medium irradiation times. From 0-15 min it has a very large and steep increase of 27.48%. From 0-45min it has an increase of 13%. On the contrary, from the experiments with the long duration of irradiation of 3 hours, a great reduction of its height is observed, which reaches the rate of 24.11%. In conclusion, the alteration of the structural and morphological properties of the nanofibrils increases, as the time of their exposure to red light increases. The final experiments focused first on the production of elastin-collagen stock solution and then on the growth of thin films from the combination of the two proteins. In nanoscopic imaging of elastin and collagen fibrils using AFM, fibril lattices of both proteins with ratios of 1:1 and 1:2 were observed. The first 1:1 elastin/collagen ratio combination is internationally innovative, as no elastin and collagen fibrils have been imaged simultaneously at the nanoscale level using AFM. In the second ratio of the proteins to be studied, meshes were observed, but mainly of collagen fibrils, as the presence of elastin was not evident. Therefore, the specific ratio (1:2) needs further scientific investigation, mainly in the protocol for creating the elastin/collagen mother solution.Finally, the conclusions occurred from the above results are briefly presented below. Understanding the self-assembly of elastin offers viable solutions for the construction of protein nanostructures, with specific physical and chemical properties, for applications in biotechnology and tissue engineering. The significant reduction in fiber height and length is likely a result of the "breaking" of the cross-links in the amino acid sequences within the elastin fibers due to UV irradiation. The alteration of elastin fibers, due to the increase of their diameter from UV exposure, can be related to the degradation of the polypeptide chains between the cross-links, which affects their spacing and leads to non-elasticity of the fibers. Therefore, the clarification of elastin interaction mechanisms with ultraviolet irradiation is of particular interest, as it is an important step in understanding the phenomenon of photoaging of the skin.Also, the great effect of direct radiation on elastin is clear. A fact that can be documented by photons absorbed by mitochondrial chromophores in skin cells. Due to the increased blood flow, the stem cells are activated which also affects the elastin. Consequently, its elastogenesis, for increased repair and healing of injured tissues. These results provide novel evidence for the mechanism of interaction of elastin with red radiation at the nanoscale. Finally, the combined study of elastin and collagen serves as a deeper understanding of how different amounts of elastin affect collagen thin films. In addition, the use of AFM as an important quality control tool is capable of recording in excellent nanoscale detail the structural properties of the fibrils of the two proteins. Which in turn will affect the behavior and growth of the cells that will grow on the thin membranes. The correct combination of elastin and collagen is important for creating appropriate scaffolds, for wound healing, tissue aging and other cardiovascular diseases. These insights will prove useful when developing elastin/collagen bio-surfaces for tissue engineering applications in regenerative medicine in the future.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Sampani, Kyriaki
  • Σαμπάνη, Κυριακή

Subjects

dc:subject × 30

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/57129

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Sampani, Kyriaki; Σαμπάνη, Κυριακή. Απεικόνιση μικροσκοπίας ατομικής δύναμης βιολογικών μακρομορίων. National Technical University of Athens (NTUA), 2024. http://hdl.handle.net/10442/hedi/57129