Back to search

University of Thessaly (UTH)

Porous materials: constitutive modeling and computational issues

Abstract

dc:description

This work is concerned with the development, calibration, and numerical implementation of a novel fully explicit isotropic, rate-independent, elasto-plastic model for porous metallic materials. The microstructure is assumed to consist of a random, with uniform probability, distribution of randomly oriented spheroidal voids of the same shape. The proposed model is based on earlier homogenization estimates that use a Linear Comparison Composite (LCC) theory. The resulting expressions exhibit the simplicity of the well known Gurson model and, thus, their numerical implementation in a finite element code is straightforward. To assess the accuracy of the analytical model, we carry out detailed finite-strain, three-dimensional finite element (FE) simulations of representative volume elements (RVEs) with the corresponding microstructures. Proper parameter calibration of the model leads to fairly accurate agreement of the analytical predictions with the corresponding FE average stresses and porosity evolution. We show, both analytically and numerically, that the initial aspect ratio of the voids has a significant effect on the homogenized effective response of the porous material leading to extremely soft responses for flat oblate voids (e.g., aspect ratio less than 0.5) especially at high stress triaxialities. Next, we examine the computational issues related to the numerical implementation of rate-independent constitutive models that lead to softening behavior. It is shown analytically that elastic-plastic models based on "local" continuum formulations that do not incorporate a characteristic length scale may lead to loss of ellipticity of the governing partial differential equations (PDEs) and mesh-dependent numerical solutions. To remedy the associated numerical problems, we propose an implicit non-local version of the porous model developed in this work which is based on the introduction of a non-local porosity variable determined from the solution of an additional PDE. We show both analytically and numerically that the regularized version of the model allows for preservation of the elliptic properties of the governing equations yielding mesh-independent, converged solutions in the post-bifurcation regime. The bifurcation point (i.e., strain-to-localization) is found to be highly dependent on the micro-void's shape, with very flat voids (e.g., aspect ratio less than 0.3) leading to lower localization strains. The material length introduced by the non-local formulation is found to have minimal effect on the predicted bifurcation point, only affecting the post-bifurcation gradient of the macroscopic stress-strain curve and the size of the highly strained zone in the structure. In the last part of this study, both the local and the non-local versions of the model are efficiently implemented in a commercial finite element code (ABAQUS). The models are used for the numerical solution of boundary value problems (BVPs) related to forming and ductile fracture processes under both quasi-static and dynamic conditions. In particular, the industrially relevant problems of Hole expansion (HET) and Charpy impact (CVN) test, the "cup-and-cone" fracture phenomenon as well as ductile fracture of a specimen with complex geometry and comparison with corresponding experimental results are analyzed in detail. Numerical predictions in all cases indicate that ductility is an increasing function of the void shape parameter and materials comprising flat oblate voids of low aspect ratio exhibit early macroscopic crack initiation and propagation compared to materials with spherical/almost spherical voids. Finally, the model's capability to reproduce experimental results with sufficient accuracy suggests that it can be utilized to provide predictions with only a small amount of parameters that may be calibrated from either micromechanics calculations or experimental data.

Degree

thesis:*
Grantor dc:publisher
University of Thessaly (UTH)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Xenos, Sokratis
  • Ξένος, Σωκράτης

Subjects

dc:subject × 21

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/57170

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Xenos, Sokratis; Ξένος, Σωκράτης. Porous materials: constitutive modeling and computational issues. University of Thessaly (UTH), 2024. http://hdl.handle.net/10442/hedi/57170