Back to search

National Technical University of Athens (NTUA)

Συμβολή στη μελέτη των συνθετικών μονωτήρων

Abstract

dc:description

Nowadays, composite insulators are increasingly used in electrical distribution and transmission networks, replacing conventional insulators made of other materials (glass, porcelain). Therefore, there is an imperative need to check and evaluate their quality via tests, measurements and inspections. The purpose of this PhD thesis is to investigate and conduct tests described in International Standards, as well as to propose modifications on them or find new tests aiming at reliably evaluating composite insulators’ quality in the shortest test duration time. In the theoretical part of the dissertation, an extensive literature review was carried out related to the tests / inspections on composite insulators that are either already included in International Standards, or are under investigation. In the experimental part of the thesis, tests were conducted on composite insulators of various manufacturers and ages (years in service), creating a database with their results, which can be used to draw general conclusions and as a reference for future research. The most important findings of the tests were clarified and recorded, and modifications to the test procedures of the International Standards were proposed. Furthermore, this thesis contributed to the recording of the expected test results when HTV silicone rubber composite insulators are tested, as well as to the test execution time reduction with new procedures. The experimental results of the inclined plane test and hydrophobicity test were used in the development of calculating methodologies (field approach) and in the validation of the results of these methodologies. In addition, a methodology for the evaluation of Shore A hardness measurements was presented, based on uncertainties calculation. At the same time, the foundation stone for real-time remote inspection of composite insulators in electrical networks was laid out, via the development of an artificial neural network which could be integrated into unmanned aerial vehicles (drones). A methodology based on the above was proposed for estimating and predicting the hydrophobicity class of composite insulators with 98% accuracy. An experimental methodology simulating the composite insulators stress by nitric acid in the electrical networks was additionally proposed, as well as two experimentally validated methodologies, regarding the mechanical strength tests through which the execution time of: a) tensile strength test and b) bending test was reduced from 96 hours to 3 minutes.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kokalis, Christos-Christodoulos
  • Κοκάλης, Χρήστος-Χριστόδουλος

Subjects

dc:subject × 32

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/57213

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kokalis, Christos-Christodoulos; Κοκάλης, Χρήστος-Χριστόδουλος. Συμβολή στη μελέτη των συνθετικών μονωτήρων. National Technical University of Athens (NTUA), 2024. http://hdl.handle.net/10442/hedi/57213