Back to search

National Technical University of Athens (NTUA)

Ηλεκτροχημική σύνθεση δισδιάστατων (2D) και μονοδιάστατων (1D) νανοδομημένων υλικών με βάση τον κασσίτερο

Abstract

dc:description

The subject of this doctoral dissertation is the electrochemical synthesis of 2D and 1D nanostructured materials based on tin with advanced physicochemical properties. In the context of this dissertation, the preparation of composite electrolytic Sn-Ni matrix coatings incorporating titania (TiO2) nanoparticles as a reinforcing material was studied for 2D nanostructures. Both direct and pulse current were applied. Nanocrystalline TiO2 powders, a) photoreactive in UV-light irradiation and b) chemically modified (N,S-TiO2 and Kronos TiO2) and photoreactive in visible-light irradiation, were used. The effect of electrolytic process parameters on the composition, structure, and morphology of the resulting composite coatings was investigated to improve the properties of these new composite metal matrix coatings. Specifically, the parameters studied were: (a) type of current (direct or pulse), (b) pulse frequency (for pulse current), (c) type of particles, and (d) TiO2 nanoparticle content in the bath. The mechanical properties, photocatalytic activity, and corrosion resistance of the Sn-Ni matrix composite electrolytic coatings with embedded titania (TiO2) nanoparticles were examined, aiming to apply them to metal surfaces with photocatalytic and self-cleaning properties. More specifically, for the development of 2D nanostructures, i.e., composite coatings, the first focus was on the study of the effect of direct current (DC). The variables for the composite coatings included :a) the type of particles (two different types of TiO2 particles, i) Evonik P25 powder with UV-photocatalytic activity, and ii) N,S-TiO2 and Kronos powders with visible light photocatalytic activity, b) the concentration of particles in the bath (g/L TiO2), and c) the current density (A/dm²). Subsequently, the effect of pulse direct current (PC) at various frequencies (ν = 0.1, 1, 10, and 100 Hz) and pulse current density was studied. The composite surfaces were examined for the particle incorporation rate, composition, structure, and morphology. Results indicated that pulse current does not significantly improve the incorporation rate of Evonik TiO2 nanoparticles into the metal matrix compared to direct current. However, the maximum incorporation rate of 3.64 wt.% TiO2 was achieved from a bath with loading 30 g/L TiO2 using pulse current electrodeposition (ν = 100 Hz, Jp = 5 A/dm²). Conversely, the incorporation rate of N,S-TiO2 particles into the alloy matrix was improved from an electrolytic bath with 20g/L N,S-TiO2 loading under pulse current electrodeposition. The application of low current density (Jp = 1 A/dm²) and either low-frequency pulses (ν = 0.1 Hz) or high-frequency pulses (ν = 100 Hz) led to the highest particle incorporation rate of approximately 3.91 wt.% N,S TiO2 nanoparticles in the metal matrix. Overall, experimental results demonstrated that varying electrolytic parameters in the presence of titania nanoparticles affect the structure, average crystal size, morphology, and surface roughness of the coatings, as well as their mechanical and physicochemical properties. The composition of the composite coatings, specifically the Sn-Ni ratio, is influenced by altering the current density under both direct and pulse electrodeposition. The surface morphology of composite coatings is characterized by spheroidal particles, giving the surface a "cauliflower" structure, and the deposits studied can be described as nanocrystalline. For both pure and composite coatings fabricated under direct current condition, the application of low current density favors the synthesis of coatings with increased microhardness. However, pulse current does not improve the microhardness of coatings produced from electrolytic baths with N,S-TiO2 nanoparticles compared to those with Evonik-TiO2 nanoparticles. Data indicate that Sn-Ni/N,S-TiO2 composite deposits have higher microhardness compared to pure Sn-Ni deposits and Sn-Ni/Evonik-TiO2 composite deposits produced under the same conditions, regardless of particle incorporation rate in the matrix. Additionally, the tribological behavior of SnNi/TiO2 composite surfaces under sliding friction conditions with a 100Cr6 ball showed abrasion, adhesion, and oxidation phenomena. The photocatalytic performance of composite coatings incorporated with Evonik P-25 TiO2 nanoparticles in the Sn-Ni alloy matrix was evaluated by studying the degradation of methyl orange under UV irradiation. Notably, compared to Ni/TiO2 matrix composite materials, the photocatalytic performance of Sn-Ni/TiO2 alloy composite coatings with immobilized Evonik P25 nanoparticles was significantly improved, making this type of composite coating attractive for self-cleaning applications. Furthermore, results from the decomposition of methylene blue and rhodamine B under visible radiation for composite coatings embedded with chemically modified N,S-TiO2 nanoparticles showed excellent photocatalytic behavior, with MB degradation reaching 80% in 60 minutes of illumination compared to 50% degradation by the same powder in the same time. Therefore, photocatalytic data suggest that effective immobilization of the TiO2 catalyst in the Sn-Ni metal matrix enhances the effective separation of photogenerated electron-hole pairs, resulting in improved photocatalytic performance of the composite coatings. Finally, the behavior of pure Sn-Ni and composite Sn-Ni/TiO2 coatings was studied using linear and potentiodynamic polarization techniques in different chemical solutions. The goal was to study the passivation phenomena of both pure and composite coatings, which was confirmed by experimental results. For the development of 1D one-dimensional nanostructures, anodized alumina (AAO) membranes were used as templates, and tin nanowires were electrochemically synthesized using direct current. The effect of key parameters on the mechanical stability of the nanowires was investigated. Specifically, the parameters studied were: (a) pore length of the template (by varying anodization time) and consequently the nanowire length, and (b) the effect of thermal treatment. The composition, structure, and morphology of the nanowires were studied, and the capacitance of the produced one-dimensional nanostructures was evaluated using cyclic voltammetry. The electrochemical surface area (ESCA) of the Sn nanowires was assessed by calculating the double-layer capacitance. Using anodization, AAO membranes with pore diameters of ~100 nm and pore lengths of ~15 μm and ~8 μm were prepared and used as templates for tin nanowire electrodeposition. Tin nanowires were electrodeposited from a commercial electrolyte using direct current. After electrodeposition and subsequent thermal treatment, AAO membranes were dissolved in 10% NaOH solution at 50°C to study the composition, structure, and morphology of the nanowires using SEM-EDS, XRD, and TEM techniques. Overall, thermal treatment enhanced the mechanical stability and quantity of nanowires remaining attached to the tin substrate. The best results were obtained after thermal treatment at 190°C for nanowires with a length of ~8 μm. The capacitance of the nanowires was evaluated using cyclic voltammetry in a 1M KHCO3 solution. Capacitance measurements of the interface showed a significant increase in the double layer capacitance values for nanowires compared to a 2D surface, confirming the superiority of these one-dimensional materials. The aim of the above study was to improve the mechanical stability of tin nanowires to maintain their increased specific surface area, making them a promising candidate for anode material in next-generation lithium batteries, as well as a catalyst for CO2 reduction, and in micro/nanoelectronics applications (nano-sensors, nano-welding, etc.).

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Rosolymou, Eleni
  • Ροσολύμου, Ελένη

Subjects

dc:subject × 29

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/57566

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Rosolymou, Eleni; Ροσολύμου, Ελένη. Ηλεκτροχημική σύνθεση δισδιάστατων (2D) και μονοδιάστατων (1D) νανοδομημένων υλικών με βάση τον κασσίτερο. National Technical University of Athens (NTUA), 2024. http://hdl.handle.net/10442/hedi/57566