National Technical University of Athens (NTUA)
Αριθμητική προσομοίωση της εργαστηριακής κοπής πετρωμάτων με μηχανικά μέσα
Abstract
dc:descriptionIn the present dissertation, the Discrete Element Method (DEM) was used to simulate laboratory rock cutting with a drag cutter. The realistic representation of the cutting force over time, as well as the failure mechanism observed in the laboratory tests, was treated as a problem of selecting appropriate values for the micro-parameters. More specifically, a calibration method was proposed using the principles of Design of Experiments (DOE) and optimization techniques. Using the Plackett-Burman and Central Composite Design (CCD) methods, equations were derived that link the micro-parameters to the average cutting forces, and an optimal set of micro-parameters was determined using the Sequential Least Squares Quadratic Programming (SLSQP) method. The study revealed that the micro-parameters, particularly the interaction range coefficient, significantly affect the cutting force history and the fracture mechanisms. The macroscopic response of the fully calibrated numerical model was evaluated both qualitatively and quantitatively in terms of the ratio of the simulated Mean Cutting Force (MCF) to the actual MCF from laboratory tests. The results showed that the cutting force from the simulation qualitatively matches the actual cutting force of the test and approximates it with an average deviation of around 3%. Through this research, a calibration protocol for the micro-parameters was developed to achieve realistic simulation of rock cutting. A comprehensive investigation of the simulation environment was carried out regarding the realism of rock cutting. The results were evaluated not only in terms of the Mean Cutting Force but also in the full time domain and frequency spectrum. The interaction range coefficient can model the microstructure of rocks and reveal the true failure mechanism and the creation of fragments that occur during cutting.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Kalogeropoulos, Antonios
- Καλογερόπουλος, Αντώνιος
Subjects
dc:subject × 14- Εξόρυξη πετρωμάτων με μηχανικά μέσα
- Μέθοδος διακριτών στοιχείων
- Σχεδιασμός του πειράματος
- Βελτιστοποίηση
- Yade
- Discrete elemement method
- Design of experiment
- Mechanical excavation
- Άλλες Επιστήμες Μηχανικού και Τεχνολογίες
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική, γενικά
- Other Engineering and Technologies
- Engineering and Technology
- Engineering, general
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/57620