Back to search

Aristotle University Of Thessaloniki (AUTH)

Ανάπτυξη με εκτύπωση και κατεργασία με λέιζερ οργανικών και ανόργανων νανοϋλικών για τη δημιουργία ηλεκτρονικών διατάξεων

Abstract

dc:description

The scope of this thesis consists of three main topics. The first section focuses on the study of thin films and optimization of printed layers for the fabrication of organic photovoltaic cells in order to improve their structural, optical and electrical characteristics. The main parameters studied are the thickness of the printed films, the printing and drying temperature, the concentration and ratio of the solvents and the effect of the solvents. Initially, the printed transparent electrodes (TE) for the anode were studied and the optimum printing conditions for the anode TE of Ag NWs were determined based on conductivity, printability, surface roughness and optical properties in relation to the printing thickness, printing speed, printing temperature and drying conditions. Then, the printed electron transport layer (ETL) was studied as to the optimal material and thickness for fabricating fully printed organic photovoltaic cells. The optimal printing conditions for the electron transport layer of tin oxide (SnO) nanoparticle electron transport layer were studied based on printability, surface roughness and optical properties with respect to printing thickness, printing speed, printing temperature and drying conditions. The next step was the study of the printed photoactive layer (PAL) in which materials used as electron donors such as PC60BM which absorbs strongly in the 200 to 400nm region found in the UV and as electron acceptors such as the polymer PPDT2FBT which absorbs mainly at 500 to 700nm with a small contribution near 300nm superimposed with PC60BM and the small molecule BTP-12 which absorbs approximately in the 600 to 900nm range were studied. Furthermore, for the first time, fully printed single carrier devices (Electron Only Devices (EODs) and Hole Only Devices (HODs) were fabricated to calculate the carrier mobility (electrons and holes) of the photoactive layer materials. Finally, the optimum conditions for coating temperature, mixture concentration and additive addition were found to maximize the performance of fully printed translucent organic semi-transparent photovoltaic cells based on the PPDT2FBT:PC60BM binary photoactive layer, the PPDT2FBT:BTP-12 binary photoactive system and the PPDT2FBT:PC60BM:BTP-12 triadic photoactive system. Then the printed hole transfer layer (HTL) was studied in terms of material and optimum printing flow and finally the printed cathode ΤΕs were studied where different materials were tested and printing parameters were optimized. In the second section, a new innovative High Speed Single Pulse Laser Ablation Synthesis in Solution (HSSP-LASiS) process was developed for the fabrication of nanoparticles without the use of surfactant which minimizes the dispersion in the distribution and shape of the produced nanoparticles, while increasing the production speed so that they can be produced in large quantities suitable for commercial exploitation. For the fabrication of the nanoparticles a special pattern was designed which maximizes the coverage of the target by using several concentric squares spaced at a distance greater than the diameter of the laser beam to avoid any kind of thermal effects which could change the temperature of the target at the point of ablation. The application of HSSP-LASiS focused on the synthesis of colloidal silver nanoparticles in water. This choice was made because colloidal silver nanoparticles in water have many applications beyond electronic devices. Their antimicrobial, plasmonic and other properties make them suitable for a wide range of applications from antimicrobial coatings, antimicrobial additives in paints to surface-enhanced Raman scattering (SERS) detection, photonic applications, catalysis, biological labeling and imaging. Then colloidal silver nanoparticles in water were used to modify printed PEDOT:PSS films in order to improve its electrical properties. Finally, the effect of modified PEDOT:PSS films with silver nanoparticles on the electrical characteristics of fully printed translucent organic semi-transparent photovoltaic cells was studied. In the third and last section, the scribing processes (P1, P2, P3 lasers scribing processes) were studied to find the optimal parameters in order to increase the Geometric Fill Factor and minimize the leakage currents. The main parameters studied are the influence of wavelength, pulse energy and pulse overlap rate on the etching quality. The etched samples were studied by optical microscopy, scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX).Initially, electrical modeling of the printed organic photovoltaic devices was performed. The resistivity of transparent conductive oxide (TCO) is a key characteristic for the performance of organic photovoltaic cells and plays an important role in the proper design of cells and devices because as the size of organic photovoltaic devices increases, the values of electrical parameters are modified. Subsequently, the development and optimization of semi-transparent fully printed organic photovoltaic devices was carried out on a large-scale R2R pilot production line. Extensive optimization of the P1, P2 and P3 laser scribing processes revealed an innovative laser scribing process using an industrial laser source. Optimal laser scribing parameters were achieved with a single wavelength (532nm) and all steps of the Laser process are performed in a single pass. The Laser can be applied for real-time scribing during R2R production of all Slot-Die coated layers. Finally, the optimized laser scribing parameters led to the fabrication of translucent fully printed organic photovoltaic devices, which exhibit performance with low power losses, compared to the single translucent semi-transparent fully printed organic photovoltaic cell and by using this innovative laser scribing process, an increase in geometric fill factor (GFF) from 60% for strip printed devices to 91% for translucent fully printed organic photovoltaic devices patterned with P1, P2 and P3 laser scribing processes, developed within the framework of the PhD thesis was achieved.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kapnopoulos, Christos
  • Καπνόπουλος, Χρήστος

Subjects

dc:subject × 32

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/57677

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kapnopoulos, Christos; Καπνόπουλος, Χρήστος. Ανάπτυξη με εκτύπωση και κατεργασία με λέιζερ οργανικών και ανόργανων νανοϋλικών για τη δημιουργία ηλεκτρονικών διατάξεων. Aristotle University Of Thessaloniki (AUTH), 2024. http://hdl.handle.net/10442/hedi/57677