University of Patras
Οργανικές ηλιακές κυψελίδες υψηλής απόδοσης και σταθερότητας με διεπιφανειακά υμένια οξειδίων μετάλλων και νανοσωματιδίων
Abstract
dc:descriptionOrganic photovoltaics (OPVs) have been the focus of significant research interest in recent decades. They are optoelectronic devices that incorporate organic semiconductors with extended conjugation of single and double bonds in their molecules. A typical organic solar cell is described by a mixed heterojunction, which is the photoactive material of the device, consisting of a blend of a conjugated polymer (electron donor) and usually a fullerene derivative (electron acceptor) sandwiched between two electrodes. The selection of suitable organic materials and the optimization of the device architecture are crucial for high performance OPVs. Therefore, the research community focuses on synthesizing new organic materials and the utilization of known materials in novel applications, so that they meet the requirements of the final products. One fundamental challenge for the commercialization this technology is achieving high efficiencies comparable to those of silicon technology. Efficient and balanced charge carrier transfer/extraction is one of the key prerequisites. Thus, alignment of the energy levels between the organic semiconductor/electrode interfaces should be achieved. Surface modification of the anode and/or the cathode incorporating suitable interfacial layers (organic or inorganic) provides a good strategy to the electrode’s Fermi level alignment with the highest occupied molecular orbital (HOMO) or lowest unoccupied molecular orbital (LUMO) bands of the photoactive blend, enabling the exchange of charge carriers between the organic materials and the electrodes. A major class of inorganic materials used as interfacial layers is transition metal oxides that combine high transparency in the visible spectrum and electronic conductivity with the ability to control their morphology and deposition on large surfaces via cost-effective techniques. Alternatively, higher efficiencies could be achieved by optimizing the photoactive layer itself with the addition of a third component acting as an additional donor or acceptor, forming ternary blends. Depending on the optoelectronic properties of the third component of the photoactive layer, it will either enhance light absorption at shorter or longer wavelengths of the solar spectrum, thereby increasing the number of photo-induced excitons, or it will enhance the extraction of charge carriers by serving as a "cascade" for their extraction. Objective of this dissertation is the optimization of the optoelectronic characteristics of organic photovoltaic devices of forward and inverted architecture by modifying the photoactive layer/electrode interfaces with interfacial transition metal oxides and nanoparticles, and the photoactive layer via the addition of two GaCl porphyrins, (TPP)GaCl and (OEP)GaCl, in order to enhance the charge transport and extraction. Initially, the surface modification of the anode in organic photovoltaics with forward architecture was studied via the deposition of fluorinated tantalum oxide (Ta2O5:F) nanoparticles on top of the conductive polymer PEDOT:PSS, serving as the hole extraction layer. The incorporation of Ta2O5:F improved the electrical characteristics of the devices enhancing their performance. It was found that Ta2O5:F influences hole transport and extraction from the anode due to better energetics between PEDOT:PSS and the polymeric donors of the photoactive layer, reduced hole extraction barrier while simultaneously altered the internal electric field, resulting in better carrier mobility. Furthermore, the improved efficiency of the electrical characteristics of the devices was combined with the enhancement of their long-term stability. Next, the modification of the photoactive layer with (TPP)GaCl and (OEP)GaCl porphyrins revealed the capability of these compounds to be successfully incorporated into high-performance photovoltaic devices with attractive functional characteristics. This was achieved by mixing them with the photoactive blend and utilizing the final ternary blend as the photoactive layer. On one hand, the electrochemical characterization of the ternary blends showed that the two porphyrins can enhance electron transport between the polymeric donors and the fullerene acceptor by forming a "cascade" electron system, as their HOMO and LUMO energy levels are situated between the corresponding levels of the porphyrins. On the other hand, the investigation of the photophysical properties of the ternary blends indicated efficient energy transfer from the polymers to the porphyrins. What’s more, the effect on the optoelectronic properties of the devices by adding the porphyrins to the binary photoactive mixtures in two ratios, 1:0.05 vol% and 1:0.1 vol%, was studied. Specifically, it was found that the incorporation of (TPP)GaCl porphyrin at a ratio of 1:0.05 vol% in the binary mixtures favors electron transport and extraction, and enhances the photostability of the device. Incorporating (TPP)GaCl porphyrin in higher ratio and (OEP)GaCl porphyrin in both ratios within the binary mixtures, it leads to a degradation of the devices due to significant alteration of the nanomorphology and crystallinity of the layers caused by the aggregation of the porphyrin molecules. Finally, the effect of metal Li nanoparticles modification of ZnO (LZO), serving as the electron extraction layer, on the performance of inverted organic photovoltaics was examined. It was found that the enhanced electron extraction from LZO is mainly attributed to Li atoms, which behave as interstitial dopants, replacing Zn_i defects thus offering effective passivation of such trap states present in ZnO while also improving the oxide’s conductivity. The enhanced nanomorphology of the photoactive blend deposited on LZO also contributed to the enhanced exciton dissociation and charge transport and collection. Additionally, the role of Li as a passivating agent was further confirmed via the surface modification of ZnO with a lithium salt, Li-TFSI. The devices incorporating the Li-TFSI modified ZnO layer exhibited significant long-term stability during continuous exposure to atmospheric environment.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Verouti, Maria
- Βερούτη, Μαρία
Subjects
dc:subject × 20- Οργανικές ηλιακές κυψελίδες/οργανικά φωτοβολταϊκά
- Διεπιφανειακή τροποποίηση
- Οξείδια μετάλλων μετάβασης (ΟΜΜ)
- Νανοσωματίδια οξειδίων μετάλλων μετάβασης
- Τροποποίηση ανόδου
- Τροποποίηση καθόδου
- Τριαδικά μείγματα
- Organic solar cells/organic photovoltaics
- Interfacial engineering
- Transition metal oxides (TMOs)
- Metal oxide nanoparticles
- Anode modification
- Cathode modification
- Ternary blends
- Φυσική
- Φυσικές Επιστήμες
- Φυσική, γενικά
- Physical Sciences
- Natural Sciences
- Physics, general
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/57729