University of Patras
Interlaminar fracture toughness of layered materials under fatigue loading conditions
Abstract
dc:descriptionIn the present thesis, the mode I and II fatigue fracture performance of a novel group of Titanium/CFRP adhesive joints is investigated. The framework is set by the need to characterize the fatigue behavior of this new group of Ti/CFRP adhesive joint. The adhesive joints under study are composed of two thin adherents, one Titanium sheet and one CFRP laminate, and are reinforced from both sides with two thick aluminum beams to increase their flexural stiffness and ensure the non-yielding of the Titanium. The interfacial fracture resistance is in the focus and aspects such as the loading that defines the crack propagation threshold as well as the utilization of an appropriate Paris-like law to optimally describe the experimental data are under investigation. The challenges and issues that arise in the fatigue crack growth characterization of such dissimilar joints due to multiple crack formation, suitable compliance and strain energy release rate definitions are thoroughly investigated in the present thesis. A new method for measuring the experimental compliance is proposed and critically compared to the dynamic compliance concept. The compliance calibration method while taking into account secondary cracking is addressed. The compliance calibration method is an experimental procedure with an aim to account for an effective crack length. Analytical solutions for compliance are formulated with the same objective, seeking to reduce experimental procedures. The fatigue crack growth curves are extracted and discussed under the prism of the aforementioned challenges. Characterizing fatigue crack growth in dissimilar adhesive joints within the Paris law framework posed challenges, particularly due to the increasing complexity of such joints and uncertainty surrounding the parameters influencing the graph. To address this challenge and draw definitive conclusions about the tested materials, uni-directional CFRP adhesive joints and composite laminates were fabricated and subjected to a series of tests, including quasi-static and high-speed loading. The present study identifies a gap in existing literature regarding fatigue fracture, particularly in relation to the loading rate effect observed in quasi-static and dynamic testing. This research aims to quantify the loading rate in fatigue experiments. Based on the assumption that Paris' equation is suitable for applying similitude, an experimental campaign is undertaken. During this campaign, we equalize the loading rates at the crack tips across experiments employing various combinations of frequency and stress ratios. This endeavour aims to tackle the commonly encountered R-ratio effect in fatigue fracture tests. Until the present day, the scientific community relied exclusively on the Paris-Erdogan empirical law proposed in the early 1960s for metals, to predict the behaviour of delaminated composites under fatigue loading. Paris’ law though uses fitting of datapoints and normalization of parameters. The physics governing interlaminar crack propagation in layered materials (e.g., composites) are still elusive. Interlaminar crack propagation in layered materials, such as composites, is still a not fully understood phenomenon in fracture mechanics. Experimental observations reveal a broad spectrum of crack propagation velocities during the interlaminar fracture of layered materials under varying loading rates. While there have been numerous studies examining interlaminar crack propagation under quasi-static, fatigue, and more recently, high-speed loading, there has been a notable lack of endeavours to present and interpret crack growth data within a unified framework. To this direction, we present a new interpretation of interlaminar crack propagation data acquired from a broad test campaign under various mode I loading conditions (quasi-static, fatigue and high-speed). We connect the crack tip velocity to the rate of change of the SERR to propose a new equation/model that shows potential in presenting and explaining the variety of experimental crack growth data. This correlation arises from a simple mathematical analysis of the rate of change of the SERR using the chain differentiation rule. Subsequently, it is further substantiated by experimental evidence, in an effort to accommodate results from various experiments under a unified description. A robust correlation of the test data is established through a range of slopes which are proven -experimentally- to be characteristic constants of the mode I interlaminar fracture of a specific material system.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Adamos, Loukas
- Αδάμος, Λουκάς
Subjects
dc:subject × 30- Θραυστομηχανική
- Θραυστομηχανική συμπεριφορά
- Κόπωση σύνθετων υλικών
- Νόμος του Paris
- Πολυστρωματικά υλικά
- Σύνθετα υλικά (αεροπορικών κατασκευών)
- Ρυθμός απελευθέρωσης ενέργειας
- Ενδοτικότητα
- Fracture mechanics
- Fracture mechanics behaviour
- Fatigue behaviour of composite materials
- Crack because of fatigue
- Fatigue mechanism
- Fatigue test
- Paris law
- Layered materials
- Composite materials
- Titanium-to-CFRP adhesive joint
- CFRP
- GFRP
- Strain energy release rate
- Stress intensity factor
- J-Integral
- Compliance
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Αεροδιαστημική μηχανική
- Mechanical Engineering
- Engineering and Technology
- Aerospace Engineering
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/57845