Back to search

Aristotle University Of Thessaloniki (AUTH)

Integrated photonic circuits for multiplexing and sensing applications

Abstract

dc:description

During the last decades Photonic Integrated Circuits (PIC) have witnessed remarkable progress in a variety of applications spanning from optical interconnects to optical sensors. However, PICs also face several challenges due to their size and performance limitations that need to be addressed in order to keep up with the increased market demands. To overcome the above problems of photonic technology, in this content, the combination of silicon photonics with plasmonic waveguides has been proposed as a possible solution for the next generation of photonic integrated circuits towards enabling more reliable, precise and compact devices. Towards this direction, the main research outcomes of this thesis have been revolved around the development of (i) a novel plasmo-photonic refractive index (RI) sensor and (ii) a silicon Arrayed Waveguide Gratings Router (AWGR) for the communication of different RI sensor in a single device. This thesis consists of 5 different Chapters. Chapter 1 describes the plasmo-photonic technology and the need of using both technologies. Then, Chapter 2 presents the concept, the layout, the theoretical analysis of the proposed plasmo-photonic RI sensor and the theoretical proof of the independence between sensitivity and plasmonic waveguide length. Chapter 3 demonstrates the experimental validation for different configurations and experimentally presents for the first time a bimodal R.I. with sensitivity value of 4464 nm/RIU for uncladded photonic waveguides and 6069 nm/RIU for cladded photonic waveguide. Furthermore, this chapter presents the experimental results for the sensitivity value for different plasmonic lengths. Chapter 4 displays the theoretical and experimental study of a 16×16 silicon photonic AWGR and finally the Chapter 5 mention the conclusion and the future work.Initially, the concept of the sensor is described. The sensor consists of two access photonic SU-8 waveguides (WG) with dimensions 1.8 μm x 1.5 μm (thickness x width) separated by an 80 nm × 7 μm aluminum (Al) metal stripe WG located on top of an appropriately thinner SU-8 WG layer (bottom layer). At the plasmonic area, two metal-insulator interfaces are formed at the top and bottom surfaces of the plasmonic stripe, which are able to support SPP modes of TM polarization. A detailed design is conducted to optimize the sensor architecture, focusing on the critical parameters, such as the Extinction Ratio and the sensitivity of the sensor, that affect its performance. Simulation results are presented, demonstrating the sensor's response to various configurations with different dimension of photonic waveguides at the input and the output part of the sensor and for the thickness of the photonic waveguide under the Al stripe. Apart from the comprehensive theoretical analysis of bimodal single-arm interferometric sensors, this thesis presents the mathematical expression that delineates the relationship between sensor sensitivity and length. According to the above analysis, the sensitivity of bimodal sensors is independent of the detection area length and depends only on the difference between the group indices of the two propagating modes. After determining the dimensions of the waveguides, the fabrication of the proposed sensor and the experimental characterization followed. More specifically, a different configuration of the plasmo-photonic sensor was characterized. Through the experiments the plasmonic propagation losses were calculated and found equal to 0.10 dB/μm for the top mode and 0.143 dB/μm for the bottom mode, while the photonic to plasmonic interface losses were found equal to 2.28 dB. The above values are in quite good agreement with the simulation results, i.e., propagation losses of 0.055 dB/μm for the top mode and 0.104 dB/μm for the bottom mode, and interface losses of 2 dB per interface. Also, RI experiments were performed using a sensor with plasmonic length equal to 100 μm. The achieved experimental bulk RI sensitivity was found equal with 4464 nm/RIU by using liquid samples with varying refractive indexes. The above sensitivity value was in good agreement with the one expected from the theory (5806 nm/RIU). After that, the experimental study of the sensitivity using a bimodal plasmo-photonic sensor with different plasmonic stripe lengths (50, 75, 100 μm) was carried out, revealing that the length of plasmonic waveguide has no impact on sensing performance. The obtained sensitivity values for the sensors with the above plasmonic stripe length were found equal to 4464, 4386, 4362 nm/RIU, respectively. These findings give the ability for more compact and powerful sensors that can achieve high sensitivity values at ultra short sensing lengths. After the proof of principle of the uncladded bimodal sensor, the next step was the experimental characterization of cladded bimodal sensor. Adding the protective cladding, the protection from environmental parameters such as dust was achieved and the sensor with the extra cladding layer was suitable for bio-experiments. RI experiments reveal sensitivity value equal to 6069 nm/RIU, which are in excellent agreement with the value expected from theory (6078 nm/RIU).Finally, a comprehensive study of the principle of operation, design, fabrication, simulation, and experimental characterization of Arrayed Waveguide Gratings Routers (AWGR) was described for use as a multiplexer towards enabling multiplexed sensor devices. After the theoretical analysis that defines the optimum AWGR dimensions, including waveguide dimensions and refractive index contrast, the AWGR was fabricated and experimentally evaluated. The experimental demonstration of the AWGR revealed a channel spacing equal to 1.063 nm (189 GHz), a free spectral range (FSR) of 17.8 nm (3.15 THz), a 3-dB channel bandwidth of 0.655 nm (116 GHz), a channel peak insertion loss (IL) value that ranges between 3.9 dB and 8.37 dB yielding a loss non-uniformity (Uni) of 4.47 dB among all port combinations, and a crosstalk value equal to 21.65 dB. The experimental results of the AWGR were in good agreement with the results obtained from the simulations.To summarize, the proposed cladded bimodal plasmo-photonic sensor, exploiting Al as the plasmonic metal and SU-8 as the photonic platform, offer high bulk sensitivity values, reducing the footprint of the device. The combination with photonic AWGR offer promising prospects for advanced sensing and interconnections application, providing a powerful tool for comprehensive and accurate detection of a wide range of biological analytes in a single device improving the performance capabilities of sensors.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2024

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Fotiadis, Konstantinos
  • Φωτιάδης, Κωνσταντίνος

Subjects

dc:subject × 38

Rights

Language dc:language
eng

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/57916

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Fotiadis, Konstantinos; Φωτιάδης, Κωνσταντίνος. Integrated photonic circuits for multiplexing and sensing applications. Aristotle University Of Thessaloniki (AUTH), 2024. http://hdl.handle.net/10442/hedi/57916