Aristotle University Of Thessaloniki (AUTH)
Pilot plant scale investigation of phase change solvents in absorption-based carbon dioxide capture and carbon dioxide utilization in carbonate salts nanoparticles production
Abstract
dc:descriptionIn its first part this study aims at investigating the potential of the novel phase-change mixture S1N/DMCA for post-combustion capture applications from dilute flue gases. MEA 30 % is not preferable as certain physicochemical and process drawbacks lead to overall high capture costs, including high regeneration energy requirements and solvent replenishment rate and similarly increased costs of maintenance due to increased corrosivity. Phase-change mixtures remedy such issues by enabling the processing of reduced liquid volumes in regeneration, at lower temperature as well, as upon reaching a critical CO2 loading, they separate into an aqueous phase that is rich in CO2 and an organic, CO2-lean phase that can skip regeneration. However very few such mixtures have been tested beyond lab-scale, and only 3 at industrially relevant conditions in TRL 5 plants. There is also a gap in knowledge pertaining to the effect of pollutants on the phase-change behavior and process performance in the presence of pollutants, whereas technical details of the process are available scarcely. Therefore, developing and piloting advanced solvents is mandatory, to support the proliferation of new generation capture systems. Testing in small(er) pilots, where a novel solvent faces industrially relevant conditions is crucial, as it provides early insights on the expected performance to be met in mature facilities. S1N/DMCA mixture has never been validated at pilot scale, its optimal concentration remains to be discovered. This study brings the phase-change mixture S1N/DMCA from TRL 3 lab-scale development to TRL 4-5 process operation, in two pilot plants. The parametric experimental study includes a total of two solvent molarities (2 and 3 mol/L), two solvent forms (pure and with pollutants), three flue gas concentrations (5, 9 and 12 vol.%), five flue gas flow rates (7, 8, 10, 12 and 14 L/min) and various liquid to gas ratios in the absorber. The comparison to benchmark MEA is based upon three key performance indicators (KPIs), namely absorption performance (cyclic capacity, absorption efficiency), desorption performance (regeneration efficiency, energy requirements) and corrosivity (metal accumulation and physical property variation). The phase-change performance is another indicator for proof-of-concept. The results of Pilot 1 (TRL 4) indicate a superior performance of S1N/DMCA 3 mol/L mixture compared to 2 mol/L. The organic phase represents approximately 30 % of total volume, is enriched in amine (75 wt.%), leading to important reductions in solvent flow to regeneration and retains negligible amounts of absorbed CO2 (0.05-0.11 mol CO2/kg), whereas the aqueous phase is enriched in CO2 (1.6 mol CO2/kg) and retains 25-32 wt.% total amine. S1N/DMCA enables robust operation maintaining a cyclic capacity up to two times higher than that of MEA at various liquid to gas ratios. It achieves operating loadings close to equilibrium and a regeneration energy of 2.3 GJ per ton CO2, which is 45% reductio compared to MEA. The results of Pilot 2 (TRL 5) gave proof of concept for biphasic behavior after the addition of high pollutant concentration (SOx and NOx absorption emulated with the addition of 0.03 mol H2SO4+HNO3 per mol amine) for the first time. The organic phase exhibits amine content up to 78 wt. %, the aqueous retains over 95 % of the absorbed CO2 and covers 73-82 % of the total volume of rich stream, effectively reducing the liquid flow into regeneration. The pollutants influence the performance mildly. The relative volume of phases shows 5% variation. Cyclic capacity is affected marginally, remaining 90 % higher than the respective for MEA. S1N/DMCA is characterized by slower kinetics, introducing the need for 17 % increased packing height in the absorber to achieve a similar absorption efficiency to MEA. However, this can be traded by up to 60 % lower regeneration energy requirement, induced by improved regeneration efficiency and, indeed, at lower temperature (103-105 °C versus 120 °C for MEA). S1N/DMCA operates within the range of other phase-change mixtures that were demonstrated in larger pilot plants (TRL 6). Preliminary assessment of corrosivity and variation of physical properties revealed that pure S1N/DMCA presents improved behavior compared to its individual components. Under high pollutant concentrations S1N/DMCA accumulates 17 % lower Fe and 30 % lower Ni, revealing reduced corrosivity against SS316L compared to MEA.In its second part this study aims to develop a process for CO2 utilization at pilot scale. Pilot 3 employs a rotating packed bed (RPB) reactor to intensify the production of high-value nanostructured calcium carbonate CaCO3 (nano-PCC) and hydromagnesite 4MgCO3Mg(OH)2‧4Η2Ο (nano-HM) by carbonating Ca(OH)2 and MgO suspensions. Conventional stirred vessel reactors (CSTR) present long characteristic times of reaction, and difficulties in controlling product properties like particle size (distribution), morphology and so forth. Size controlling additives are needed to ensure repeatable production quality. Achieving up to triple mass transfer and homogenous residence time for nucleation and growth of particles, rotating packed beds are ideal to replace conventional equipment for reactive precipitation processes. Rotating packed beds result in significant reduction of equipment volumes, improved control over product properties and mild operating conditions. The CO2 utilization experiments in this work investigate the effect of operating conditions on nanoparticle production efficiency. In total the experiments include three different precursors in suspensions of three concentrations (10, 30 and 50 g/L), three gas flow rates (3, 6 and 9 L/min), four liquid flow rates (3.43 – 4.75 L/min) and four rotating speeds (500, 1000, 1300 and 1800 rpm). The evaluation is based on three KPIs, namely reaction time, particle size and utilization efficiency. The results indicate the existence of tradeoffs among the employed KPIs. A triple trade-off is observed between reaction time-product purity-capture efficiency. At low speed (600 rpm) centrifugal acceleration is not sufficient at handling high flow rates. Combining high flows and low speed causes liquid maldistribution, increases the reaction time, and lowers the utilization efficiency. At high speed (1800 rpm), increased flows are handled effectively in the RPB. Mass transfer is enhanced, reaction time is reduced, and particles of smaller size are synthesized. In the RPB precursors of lower grade achieve reaction times like their refined counterparts, resulting from intensified mass transfer. Regarding the experiments targeting the synthesis of nano-PCC, the results indicate the successful production of calcite monodisperses of high purity and within technical grade commercial products, with crystallite size as low as 45 nm and a capability for -45 % reduction of reaction time by adjusting the relative feed rates and rotating speed in the reactor. The calculated utilization efficiency under all conditions reaches up to 99 % for this process. This was achieved at mild conditions and by avoiding the use of additives. A novel contribution of this study results from achieving a single-step synthesis of nano-HM for the first time, via carbonation of MgO suspensions. Specifically, the results reveal nano-HM monodisperses of 2D particles with crystallite size 17-22 nm. The results exhibit tunable particle size distributions depending on the operating parameters and reduced reaction times compared to other published literature. The attained crystals exhibit near pharmaceutical-grade specifications, and at minimum satisfy technical grade specifications. The kinetics of this carbonation process are otherwise sluggish, resulting in utilization efficiency that does not exceed 25 % in a CSTR. In the RPB the efficiency is 90-94%. Also, regarding the process performance, it is underlined that the synthesis conditions were of low environmental impact, with reaction taking place at atmospheric pressure and 60 °C, without leaching agents and size controlling additives. The RPB enabled operation near stoichiometric conditions with 76 % lower CO2 feed rate (g CO2/g MgO/h), 97 % lower reaction time per MgO unit mass (min/g MgO) and 45-63% narrower particle size distribution (nm) compared to a CSTR-based study ran in parallel by a magnesium oxide production company.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Nessi, Paraskevi
- Νέσση, Παρασκευή
Subjects
dc:subject × 13- Δέσμευση και αξιοποίηση διοξειδίου του άνθρακα
- Διαλύτες αλλαγής φάσης
- Αντιδραστήρας περιστρεφόμενης κλίνης
- Νανοσωματίδια ανθρακικών αλάτων
- CO2 capture and utilization (CCU)
- Phase-change solvents
- Rotating packed beds
- Carbonate salt nanoparticles
- Επιστήμη Χημικού Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Χημική μηχανική
- Chemical Engineering
- Engineering and Technology
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58039