University of Patras
Advanced poly(lactic acid) blends and nanocomposites for sustainable and functional food packaging
Abstract
dc:descriptionPlastics have long been incorporated in everyday life, in applications ranging from general – use items and packaging, to medicine and electronics. The dominant role of petroleum – based plastics and their consequent high environmental impact, necessitate the adoption of more eco – friendly practices, that take into account the circular economy and sustainability trends. Recently, the replacement of petrochemical polymers with bio – based and biodegradable ones has garnered significant attention. Out of the many options, poly(lactic acid) (PLA) has emerged as a viable alternative due to its cost – efficiency balance, having found application in many market sectors, with the packaging being the most prominent. However, PLA is limited by certain deficiencies, such as brittleness and low barrier to vapors. As a response to its shortcomings, various functionalizing strategies have been proposed over the years aiming towards the improvement of its properties and the expansion of its utility. Among them, reinforcement with fillers and blending with other polymers and plasticizers have been proven to be effective methods for enhancing its performance. The scope of this dissertation is the preparation and investigation of the physical properties of blends and nanocomposites based on Poly(lactic acid) towards food packaging applications. Additionally, the surface modification of the prepared systems is examined through the Atomic Layer Deposition of functional compounds, aiming to enhance properties critical for food packaging. The functionalization of PLA using nanofillers is first demonstrated through the investigation of a PLA/titanium dioxide system. The impact of nanosized TiO2 on the physical properties of PLA was explored, along with the combined effect of Atomic Layer Deposition (ALD) of zinc oxide (ZnO) on the nanocomposite films' surface. The PLA/TiO2 bionanocomposites were prepared via melt - extrusion and characterized in terms of their morphological, thermal, and mechanical properties. Their mechanical performance appeared augmented for samples up to 5 wt.% in TiO2 content, owing to the homogeneous dispersion of the filler. Moreover, the thermal stability of PLA exhibits a slight improvement upon increasing TiO2 content. Surface modification of the PLA/TiO2 films employing atomic layer deposition of ZnO enhanced their hydrophobicity, while antimicrobial activity against the foodborne pathogens Staphylococcus aureus (S. aureus) and Escherichia Coli (E. Coli), although mild, appeared enhanced for the coated samples. The water vapor barrier was retained in both coated and uncoated nanocomposites. Characterization of the surface of the studied specimens, by X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM), revealed sub - surface diffusion and reaction of the depositing compounds within PLA, leading to a different surface chemistry involving Zn(OH)2. This study gives valuable insights on the parameters affecting the atomic layer deposition of inorganic coatings on a polymeric substrate in the presence of nanoinclusions and, therefore, on the physical properties of the coated films, providing the pathway for their exploitation in food packaging applications. Eco-friendly blends of PLA with polyhydroxybutyrate (PHB) were developed with the use of a sustainable, linear – structured plasticizer, namely the epoxidized soybean oil methyl ester (ESOME). Despite the fact that PLA, PHB, and their blends are recognized for their bio - origin and end of life compostability, increasing their flexibility to boost processability and expand their potential applications remains a persistent challenge. Therefore, PLA/PHB blends with 5, 7.5 and 10 wt.% in ESOME concentration were formulated, and the resulting biocomposites were processed by extrusion and compression molding. The structural, chemical, rheological, morphological and thermal properties of the plasticized PLA/PHB blends were thoroughly investigated through a range of complementary techniques, namely X – ray Diffraction (XRD), Proton Nuclear Magnetic Resonance (1H NMR), Melt Flow Index (MFI) determination, Scanning Electron Microscopy (SEM), Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). The addition of ESOME caused a remarkable increase in flexibility and overall mechanical performance of PLA/PHB blends, as well as a significant enhancement of their oxygen barrier properties. In addition, investigation of the overall migration using a dry food simulant revealed that the resulting migration values were well below the acceptable limit, for the blends with up to 7.5% wt.% of ESOME. According to TOPSIS (Technique for Order Performance by Similarity to Ideal Solution) analysis of all the prepared PLA/PHB/ESOME biocomposites, the PLA/PHB/7.5 wt.% ESOME emerged as the most prominent for food packaging applications. The effective integration of ESOME and the significant improvement of the PLA/PHB properties pave the way for their adoption in the food packaging sector, aligning with sustainability goals and an environmentally conscious future. Furthermore, atomic layer deposition was employed as an extra step to further enhance the properties of the PLA/PHB/7.5 wt.% ESOME film. A corrective approach for the deposition of ZnO on the polymeric substrate was followed, that involves the mediation of a thick Al2O3 layer before the ZnO coating. XPS analysis confirmed the presence of stoichiometric ZnO on the surface of the tested specimens. Therefore, the Al2O3 layer acts as a protective layer at low deposition temperatures, diminishing the sub – surface diffusion of the precursors and their reaction with the polymer bulk. Water contact angle studies revealed the enhancement of hydrophobicity after the bilayer coating, while antimicrobial activity studies against S. aureus and E. Coli revealed inhibition of bacterial growth at the contact area. The ZnO/Al2O3 bilayer proved to be an effective approach for the successful deposition of ZnO onto polymeric substrates, further enhancing the PLA/PHB/7.5 wt.% ESOME properties. Finally, the PLA/ZnO nanocomposite system (1, 5 and 10 wt.% in ZnO), plasticized with ESOME, was explored. The addition of ESOME facilitated the processing of the PLA/ZnO films during extrusion and hot - pressing, even for ZnO content as high as 10 wt.%. The PLA/ESOME/ZnO nanocomposites were morphologically, thermally and mechanically characterized. Plasticization improved the dispersion of the ZnO nanoparticles into PLA, however the thermal stability of the PLA/ESOME matrix decreased, owing to the catalytic activity of ZnO in the thermodegradation processes. Despite the deteriorated mechanical properties of the plasticized nanocomposites due to PLA degradation during melt processing imposed by ZnO, they demonstrated better overall performance compared to the unplasticized sample. The films’ hydrophobicity was maintained after ZnO incorporation, while exhibiting mild antimicrobial activity against S. aureus and E. Coli. This study provides a solid basis for exploring PLA/ZnO nanocomposites after plasticization, towards food packaging applications.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Barmpaki, Aimilia
- Μπαρμπάκη, Αιμιλία
Subjects
dc:subject × 24- Πολυ(γαλακτικό οξύ)
- Βιονανοσύνθετα
- Βιοπολυμερικά μείγματα
- Πολυ(υδροξυβουτυρικό οξύ)
- Διοξείδιο του τιτανίου
- Οξείδιο του ψευδαργύρου
- Εποξειδωμένος μεθυλεστέρας ελαίου σόγιας
- Ατομική εναπόθεση στρώματος
- Βιώσιμη συσκευασία τροφίμων
- Poly(lactic acid)
- Bionanocomposites
- Biopolymer blends
- polyhydroxybutyrate
- Titanium dioxide
- Zinc oxide
- Epoxidized soybean oil methyl ester
- Atomic layer deposition
- Sustainable food packaging
- Φυσική
- Φυσικές Επιστήμες
- Φυσική συμπυκνωμένης ύλης
- Physical Sciences
- Natural Sciences
- Condensed Matter Physics
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58078