National Technical University of Athens (NTUA)
Analysis and design of composite material driveshafts for marine applications
Abstract
dc:descriptionComposite materials are increasingly becoming the materials of choice for a large number of products and applications, due to the exceptionally high strength to weight ratio they offer. Aviation, automotive and marine industries are increasing their investments in the study and development of composite materials and structures, in order to use them more extensively in various applications of their respective fields, aiming to save weight and increase energy efficiency. The use of composite materials for the manufacturing of power transmission driveshafts attracts particular interest. Especially for the marine sector, apart from their high strength and light weight, composite shafts offer the advantages of high fatigue and corrosion resistance. However, the efficient design of composite driveshafts is a challenging task, because of the complex mechanical behaviour and failure modes and mechanisms of composite materials, due to their anisotropic nature. This work deals with the analysis and design of composite material driveshafts for marine applications and beyond, with an eye towards the development of their structural digital twins. The study begins with the vital identification of the physical and mechanical properties of the composite materials produced by the filament winding method, which is used in the manufacturing of composite material driveshafts, highlighting their differences to the common laminated composites. Then, the split disk test, used for the measurement of the elastic modulus and strength of the materials in the fiber/hoop direction, is utilized as a reference case study for the development and validation of the Finite Element Model of filament wound structures. Having identified the mechanical properties of the filament wound composite materials and validated the split disk test finite element model against the experimental results, the foundations for the finite element analysis of composite material driveshafts are laid. The various modelling options are investigated and the predictions of the model regarding the failure load and mode and the calculated deformations, strains and stresses on the driveshaft are assessed. The sensitivity of the model on critical mechanical properties and geometric parameters is also investigated and the behaviour of the driveshafts close to the failure load is approximated by a progressive damage analysis. Based on the developed model for the analysis of composite driveshafts, the optimal layup of a marine driveshaft is defined using optimization algorithms and having as criteria the maximization of the buckling load and the minimization of the weight. The optimum layup driveshaft is analysed both statically and dynamically, according to the specifications of the application. The testing and structural health monitoring methods of composite driveshafts are then investigated and an experimental testing campaign is planned, in order to capture their mechanical response and validate and refine the Finite Element Models. Static torsional tests for defining the failure load and failure mode of several shafts were conducted in NTUA, BT Composites and TU Dresden. The strains on the shafts are measured by strain gages in all tests and by a digital image correlation system as well in TU Dresden. Additionally, a first attempt to measure the applied torque on composite driveshafts with a telemetry system is also made with promising results. In TU Dresden, apart from the torsional tests, an experimental modal analysis of the driveshafts was conducted and 3D scans and CT scans were also performed on the shafts before, during and after the torsional tests, in order to investigate any internal changes in the material. Additionally, four CFRP driveshafts with embedded optical fibers were manufactured in the facilities of TU Dresden and the preliminary work and the manufacturing process are described in detail. Some discrepancies between the numerical and experimental results led to an uncertainty quantification study on the mechanical response of the composite driveshafts, considering the uncertainty in the mechanical properties, winding angle and thickness. This study indicated which of the tested driveshafts differed significantly from their nominal specifications and led to the creation of a fast tool for the initial prediction of the expected mechanical response range of composite driveshafts. The connection between the composite shafts and their steel flanges is also studied and a model considering the cohesive zone is built to assess whether the connection can withstand the applied torque. Utilizing the knowledge obtained, a preliminary study about the replacement of a ship’s steel intermediate shaft with a CFRP one is performed. Summing up, the present PhD thesis provides in depth knowledge about the analysis, design and testing of composite material driveshafts for marine applications and beyond and can act as a guide for their optimal structural design, testing and health monitoring, building the foundations of their structural digital twins.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2024
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Bilalis, Elias
- Μπιλάλης, Ηλίας
Subjects
dc:subject × 39- Άξονες από Σύνθετα Υλικά
- Σύνθετα υλικά
- Άξονες
- Ανάλυση
- Σχεδίαση
- Κατασκευαστικός σχεδιασμός
- Βελτιστοποίηση
- Μηχανικές δοκιμές
- Δοκιμές
- Πειράματα
- Ανάλυση με πεπερασμένα στοιχεία
- Μηχανική
- Μηχανική συνθέτων υλικών
- Composite Driveshafts
- Composite shafts
- Composite materials
- Driveshafts
- Shafts
- Analysis
- Design
- Structural design
- Optimization
- Mechanical tests
- Tests
- Experiments
- Finite element analysis
- Mechanics
- Mechanics of composite materials
- Επιστήμη Μηχανολόγου Μηχανικού
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανολογία
- Μηχανολογια οχημάτων
- Μηχανική Υλικών
- Κεραμικά και Σύνθετα υλικά
- Mechanical Engineering
- Engineering and Technology
- Automotive Engineering
- Materials Engineering
- Ceramics and Composites
Rights
- Language dc:language
- eng
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/58146